Jump to content
Sign in to follow this  
Syphus

U-Phoria UMC404HD Interface - Behringer

Recommended Posts

Hi there,

A friend of mine just bought this interface and I was curious if anyone out there is using this hardware?

His OS is Windows 10 -  I don't want to get too technical here.  I want to hear some opinions about it (good or bad)

He is experiencing what appears to be a driver conflict:  With out warning while using CbB or youtube,  The driver disconnects and has to be "jump started" by pulling the USB cable and reinserting.

The dropout seems to be random and not triggered by any particular action.   Doing some research, I found it might be conflict between Windows bit rate settings and his ASIO settings.   Has any using this unit experienced this and if so, how did you "fix it"

Any experienced suggestion is appreciated.   I don't want to dive too deep.  I don't know what his board specs are and don't think it matters in this case.   Just fishing for ideas on the problem and possible solutions

 

Thanks in advance . . .

 

Syphus

Share this post


Link to post
Share on other sites

There is a known issue with clock rate miss matches and it seems system dependent related to the quality of the audio ASIO driver.  

Video ( utube) uses 48 and a lot of people like me use 44.1 for all my recordings.  I never have disconnect issues when using my Tascam or Focusrite interfaces but I was given a M Audio fast track pro ( ya real old) and it always disconnects. 

I only use my AUdio interfaces for all system sounds but I think some people solve this issue by setting things to use on board audio for everything other than DAW work. Seems a pita as you would need 2 sets of speakers. 

  • Thanks 1

Share this post


Link to post
Share on other sites

I am using a UMC204HD (the smaller version).  I'm definitely not having any driver disconnect issues.  But I do have Windows configured to use 48khz just like all my ASIO projects in every daw.  There have been driver/firmware updates last year, so I'd make sure you get those.  I'm running version 4.59.0 which I believe is the last version.  Download it from here (for the 404HD)

https://www.behringer.com/Categories/Behringer/Computer-Audio/Interfaces/UMC404HD/p/P0BK1/Downloads

When some Windows apps change the sample rate to 44.1 things can sometimes get stuck, doesn't happen often.  Oddly enough this doesn't happen to ASIO apps (they keep working at any sample rate), they seem happy to change the sample rate.  But native Windows apps will stop being able to make sounds.  Usually when this happens I hunt down every app that has the audio device open and kill it/restart it. Which fixes the problem.  But this doesn't happen very often, assuming you have Windows configured to use the 48khz sample rate you use for audio.  Worse case I have to unplug and reconnect the box.  But that isn't very common at all (every 3 months or so maybe).  And this is on a computer that is on 24x7.

Note it's important to make sure you are powering the interface correctly.  I'm using a full tower ATX desktop with a full power USB port and I've configured it to never do any power saving.  A laptop USB port might not be able to put out enough juice to run the interface.  A high-quality powered hub might help with that.

  • Thanks 2

Share this post


Link to post
Share on other sites

I have a 404HD.  I am actually surprised how good it is considering its price. The latency is great, I've never had any problems with it and I run it powered off my desktop's  USB port. Like other posters have said here, the main thing is to match Cakewalk's and Windows' sample rates.

It's a great interface!

  • Thanks 1

Share this post


Link to post
Share on other sites
10 hours ago, Matthew Sorrels said:

I'm running version 4.59.0 which I believe is the last version.  Download it from here (for the 404HD)

Thanks Matthew, I hadn’t noticed there was an update available. I’ve got a UMC404HD at home and the smaller UMC204HD at my vacation home, as I needed the classic MIDI input connection which isn’t very common in this price range. Never had any problems with the interfaces or their drivers since I bought them almost two years ago. All sample rates are matched throughout my systems.

  • Like 1

Share this post


Link to post
Share on other sites

I've also used a 404HD without issue, and for the money I think it's a great choice -  latency is fine, and it's built like a tank with lots of IO

I also noticed windows apps might have sound issues if sample rates not aligned between Cakewalk and Windows, so check that first.

 

  • Thanks 1

Share this post


Link to post
Share on other sites

One thing that can be a factor is the option in the Windows Sound panel for how Exclusive Mode works, I never check this box:

wm1cgJ.jpg

And I don't let Cakewalk take exclusive control either.  And I agree for the money it's a great interface.  I needed something to fill in when Firewire quit being reliable on Windows 10 (I got it to work, but it was never as solid as on Win 7) but none of the Thunderbolt 3 interfaces were shipping yet (still true, still waiting), so I went with this as the fill in interface.  It's been very decent.

  • Thanks 1

Share this post


Link to post
Share on other sites
Posted (edited)

Another UMC404HD user here. I've owned it for quite a while but I've just started using it on a regular basis after my great old M-Audio Delta 66 finally tanked. It will be missed. I haven't had any issues such as you describe, but I have it set for 44.1k mostly because I use Band in a Box a lot and it will only do 44.1k.

I agree, it's a great interface for the money. I researched audio interfaces extensively before I bought it and I felt quite confident -- still do -- that it's the best audio interface out there for the money. Only things I've noticed about it so far are it doesn't seem to have the same amount of gain capacity as my old Delta before noticeable distortion sets in.

Edited by Michael McBroom
  • Thanks 1

Share this post


Link to post
Share on other sites

Hi All - Thanks for the response . . .

My buddy disabled all his sound drivers except the UMC404HD driver and he said it appears to be stable (time will tell).  I won't know till this weekend if he was successful . . .

Still, if you have info on this interface, please do include it in the thread.  It could prove to valuable to others using or thinking about getting  this interface.

 

Once again,   Thank you all!

 

Syphus

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×
×
  • Create New...