scook

This was how SONAR worked through X3. IIRC, a change was introduced early in 2015 where the interleave was no longer linked to the track input but I do not recall the rationale for the change.

FabFilter recommends against using their mono plug-ins in new projects. Here is an example from the Pro-DS help

Could try adding the entries into the registry. They both look the same. Here is the entry for HKEY_LOCAL_MACHINE\SOFTWARE\Cakewalk Music Software\Shared Plugins\Perfect Space Still - may be a good time to look for a replacement plug-in. Of course, the PS IRs should load in any IR reverb that supports regular wav files. The MConvolutionEZ does.

It's not too late to stop using them. The support for 32bit plug-ins is unlikely to improve.

Still on Win10 1809 here. Just loaded the plug-in for the first time in years. Seems to work OK. I stopped using it when I transitioned to 64bit in 2011. I believe the path to the impulses is stored in LastImpulseFolder under HKEY_LOCAL_MACHINE\SOFTWARE\Cakewalk Music Software\Shared Plugins\Perfect Space and HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Cakewalk Music Software\Shared Plugins\Perfect Space maybe something went wrong with those entries. That said, it not too late to consider using a different IR Reverb. One that is still in production and supported by the manufacturer. Perfect Space has not been updated almost 8 years. MConvolutionEZ is part of the MFreeFXBundle, as the name indicates, the plug-ins are free.

Most of Cakewalk by BandLab may be installed on any drive unless there is another Cakewalk DAW (SONAR, Music Creator...) already installed. If there is an existing Cakewalk DAW installed, CbB will install on the same drive. CbB uses around 100MB of the C drive regardless of where the program is installed.

No it's not just you... But going forward for this & other reasons I'm taking Mr. Scooks advice... Of course, aux tracks like regular audio tracks lack waveform preview. The only way to see the waveform in an aux track is record to the track (just like any other regular audio track).

Instead of removing/redrawing preview images, I use automation lanes with aim assist enabled. For those who insist on avoiding automation lanes, audio scaling may help move the preview image out of the way.

Yes, in envelope mode No, in offset mode See http://www.cakewalk.com/Documentation?product=Cakewalk&language=3&help=Automation.13.html

When running in ASIO mode only one input/output driver may be used at a time. This is a requirement of the ASIO specification. In this case, to change drivers deselect both input and output driver settings then select a different driver. To use more than one driver requires changing driver mode from ASIO to something else.

It also occasionally goes on sale like this If you want to buy it today - shop around (or ask for the best price in the deals forum below). There is no reason to pay retail. Even when it is not on sale, it is still discounted by some resellers (ex. use code Forum at jrrshop for almost $11 off).

Implementation details would be up to Noel and crew. There are large format modules with smaller buttons. Could stack 1/2 size navigation buttons (like RTZ/Go to End buttons in the transport module) to make room for full size delete or overload the add button, left click to add, right click to delete or right click the menu for delete.

The ability to maintain different plug-in sorts for the different lists was removed from SONAR in 2017. I do not have all versions installed but 2017-06 allows different lists, 2017-09 does not.

OK. Thanks for the feedback. The is the cumulative effect of overlaying multiple clips. A clip outline is actually semi-transparent contrasting background. Stack up enough of them and they take over the PRV.

Read the whole thread

Sounds familiar

Does deselecting "Show Clip Outlines" in the PRV View menu help? "A" in the image below points the View menu.

Is this a MIDI or audio issue? If MIDI Is the MIDI driver mode set the same on Platinum and CbB

If you are going to re-install and are comfortable editing the registry make sure to clean up the registry as part of the uninstall. Here is a post about it Although I would not perform a re-install preemptively unless I knew the install failed. Instead I would work with Noel first.

May be project specific. Consider supplying the project and the steps used to support@cakewalk.com I just tested with a new project TTS-1 added as an instrument track Copied a MIDI clip into the track Opened the Event List view Clicked on the first event in the Event List view Then stepped through with CTRL+ALT SPACEBAR Did not matter if left or right CTRL+ALT was used

It does alter signal somewhat, not unlike the other cabinets bundled with the plug-in and different IRs do sound different. At least that is my experience stepping through the IRs bundled with the plug-in. But don't expect all that much. I doubt it will ever be the case that dropping a single IR into a plug-in is ever going to deliver killer tones by itself.

Maybe a focus issue, try clicking in the Event List before stepping with CTRL+ALT SPACEBAR (works the same in X3 and Platinum). BTW, don't know about others but I like to see a link to the source when quoting something like the help. In this case, I found the quote in the OP here

Here is the thing about most Overload products that have an IR player like TH3. The IR files must be imported into the plug-in's database before they show up. This is different than most other products that simply load IR files directly from the HD. Double-click the IR Cabinet then click the "Import New IR" button to add IRs to the TH3 IR database The process is described on page 22 of the TH3 manual.

The screen image is too small to be useful. Please avoid uploading full screen images, the forum resizes them. Instead post just the appropriate dialogs when uploading images. For full screen shots and larger images use an image hosting service (I use http://imgur.com) and embed the link in your posts. These are all included with CbB. In fact, these should have been overwritten during CbB install assuming both Platinum and CbB are 64bit and CbB was installed after Platinum. May want to run a VST reset from preferences. The path for the PC modules is not listed in preferences but is silently added to the scan path. The path is visible in the Plug-in Manager. By default, the PC path is C:\Program Files\Cakewalk\Shared Utilities\Internal. May want to verify the path is correct by checking it in the Plug-in Manager VST configuration options. There also may be an issue with old templates. Are you using template supplied with CbB or custom templates built with SONAR? If the latter considering recreating them in CbB.

The tools have been completely rewritten. All have font support, light and dark styles. Upsample Editor now supports in table edits. VST Inventory has selectable columns. Old Launchpad users make sure to copy "CbB Tools.exe" into the old Launchpad folder. Others may copy the "CbB Tools.exe" where ever they like such as "C:\Program Files\CbB Tools" I will leave the old versions available as the new ones no longer support 32bit SONAR. I added font size selection to a few of my CbB/SONAR utilities. There are updated versions of Launchpad - an alternative to the start screen Plug-in Upsample Editor - a tool to manage upsample data in Aud.ini Tools Editor - a program to manage the tools section of the Utility menu available here along with a few other CbB/SONAR related things. The utilities are about half way down the page. As always, if there are questions or issues with anything on the page just let me know. For best performance, whitelist the "CbB Tools.exe" process in your antivirus software. Inventory Tool really benefits from whitelisting. Enjoy Edit: Launchpad v1.6 released 14 Aug 2019 Edit: Launchpad v1.7 released 24 Sep 2019 Edit: Launchpad v1.8 released 25 Sep 2019 Edit: Launchpad v1.9 released 2 Dec 2019 Edit: ToolsEditor v1.3 released 31 Dec 2019 Edit: Launchpad v1.10 released 12 May 2020 Edit: Launchpad v1.11 released 14 Aug 2020 Edit: v2.0 of all tools released 18 Mar 2021 Edit: v2.0.1 through v2.0.4 released 19 Mar 2021 Edit: v2.0.5 released 20 Mar 2021 Edit: v2.0.6-2.0.7 released 21 Mar 2021 Edit: v2.0.8 released 1 Apr 2021 Edit: v2.0.9 released 10 Apr 2021 Edit: v2.0.10 released 4 May 2023