jim137 Posted November 22, 2022 Share Posted November 22, 2022 Run Korg Software Pass to see the 12 updates: Prohecy 1.6.0 miniKorg 1.1.0 Triton Extreme 1.1.0 Triton 1.4.0 M1 2.4.0 WaveStation 2.4.0 Arp Odyssey 1.5.0 MS-20 2.4.0 Polysix 2.4.0 MonoPoly 2.4.0 MDE-X 2.4.0 LegacyCell 1.8.0 3 6 Link to comment Share on other sites More sharing options...
Spice3d Posted November 22, 2022 Share Posted November 22, 2022 I hate Korgs installer/updater app. It never remembers correctly what I've already installed. 4 Link to comment Share on other sites More sharing options...
jim137 Posted November 22, 2022 Author Share Posted November 22, 2022 Why isn't there an install all or update all button. It is still one of the most tedious installs even if it is better than it used to be. 1 Link to comment Share on other sites More sharing options...
rasure Posted November 22, 2022 Share Posted November 22, 2022 Thanks for heads up 🙂 Yeah the app they use is useless, shows thing not installed when they are, never know when something is updated unless I go look. Link to comment Share on other sites More sharing options...
jim137 Posted November 22, 2022 Author Share Posted November 22, 2022 I checked each standalone to make sure it upgraded. Link to comment Share on other sites More sharing options...
abacab Posted November 22, 2022 Share Posted November 22, 2022 KORG release notes not updated yet... https://support.korguser.net/hc/en-us/sections/900001101426-Release-Notes Link to comment Share on other sites More sharing options...
Reid Rosefelt Posted November 22, 2022 Share Posted November 22, 2022 Are there any noticeable changes? Or is this just bug fixes? Link to comment Share on other sites More sharing options...
abacab Posted November 22, 2022 Share Posted November 22, 2022 (edited) 8 minutes ago, Reid Rosefelt said: Are there any noticeable changes? Or is this just bug fixes? Nothing noticeable here yet on Windows. I have been launching them as they are installed, so at least they aren't broken! Waiting for the updated release notes to see what changes and fixes were made. However, I did observe that all synths are up to a full "point" release now, e.g., Triton 1.3.7 > Triton 1.4.0, for whatever that's worth. Edited November 22, 2022 by abacab Link to comment Share on other sites More sharing options...
simon Posted November 22, 2022 Share Posted November 22, 2022 I've updated the ARP to v1.5 but software pass still insists I have v1.3 installed room for improvement from Korg I think Link to comment Share on other sites More sharing options...
abacab Posted November 22, 2022 Share Posted November 22, 2022 3 minutes ago, simon said: I've updated the ARP to v1.5 but software pass still insists I have v1.3 installed room for improvement from Korg I think I've seen that happen a few times. Weird, but this time I left Software Pass open while I performed the updates. Then I refreshed Software Pass, and now it shows everything up to date! 2 Link to comment Share on other sites More sharing options...
simon Posted November 22, 2022 Share Posted November 22, 2022 25 minutes ago, abacab said: Weird, but this time I left Software Pass open while I performed the updates. I'm always nervous running Software Pass more than necessary - still remember this 2 1/2 years later. they have changed the install routine since then but once bitten etc. 1 Link to comment Share on other sites More sharing options...
kitekrazy Posted November 22, 2022 Share Posted November 22, 2022 3 hours ago, jim137 said: Why isn't there an install all or update all button. It is still one of the most tedious installs even if it is better than it used to be. This is why I don't use or buy from them. Link to comment Share on other sites More sharing options...
abacab Posted November 22, 2022 Share Posted November 22, 2022 28 minutes ago, kitekrazy said: This is why I don't use or buy from them. And you are also missing out on some of the best synths available! Link to comment Share on other sites More sharing options...
abacab Posted November 22, 2022 Share Posted November 22, 2022 41 minutes ago, simon said: they have changed the install routine since then but once bitten etc. The Software Pass and KORG Collection 3 installations have all been well behaved recently (the past year or so) for me. Link to comment Share on other sites More sharing options...
simon Posted November 22, 2022 Share Posted November 22, 2022 14 minutes ago, abacab said: The Software Pass and KORG Collection 3 installations have all been well behaved recently (the past year or so) for me. same here - but it still makes me edgy - I've never know software to delete unrelated entire folders, without warning before - scary ! I always keep a very careful eye on it just in case Link to comment Share on other sites More sharing options...
TheSteven Posted November 22, 2022 Share Posted November 22, 2022 (edited) 3 hours ago, Reid Rosefelt said: Are there any noticeable changes? Or is this just bug fixes? Edit: the info below is wrong/old. See subsequent posts - Korg has not yet updated the release notes. Here's the release notes from M1 & Wavestation: Quote July 21, 2022 22:22 Version 2.3.3 [PC] After updating to version 2.3.2, Cakewalk by BandLab would not open the project properly and initialize the synthesizer. This has been fixed. Here's MS-20, Polysix, MDE-X, & Mono/Poly Quote Version 2.3.1 [PC/Mac] After installing the version 2.3.0 plug-ins, opening a project that was using earlier versions of the plug-ins would cause the project to not recall properly or to crash. This issue was observed in Cubase, Nuendo and Studio One 5. This problem has been fixed. [PC/Mac] Fixed a problem in which vst patch files created with vst2 plug-ins in Cubase could not be loaded correctly in vst3. [PC/Mac] Fixed a problem with Digital Performer 11 where it would fail to validate vst3 plug-ins. and Legacy Cell Quote Changes in Version 1.7.0 [Mac] VST3 format support. [Mac] Native Apple Silicon support. Don't own the rest... Change logs: M1https://support.korguser.net/hc/articles/4403869885081 Wavestationhttps://support.korguser.net/hc/articles/4403877700121 MS-20https://support.korguser.net/hc/articles/4403877536153 Polysixhttps://support.korguser.net/hc/articles/4403869768857 MDE-Xhttps://support.korguser.net/hc/articles/4403877670681 MonoPolyhttps://support.korguser.net/hc/articles/4403877645721 Legacy Cellhttps://support.korguser.net/hc/articles/4405077394073 Edited November 22, 2022 by TheSteven 1 Link to comment Share on other sites More sharing options...
abacab Posted November 22, 2022 Share Posted November 22, 2022 1 hour ago, simon said: same here - but it still makes me edgy - I've never know software to delete unrelated entire folders, without warning before - scary ! I always keep a very careful eye on it just in case Understood! But no worries at all here. That's why I take a full system disk image backup nightly (scheduled to run while I'm sleeping). If something ever goes sideways with software (and it eventually will), I can easily restore my system in about 40 minutes from the last image taken. 1 Link to comment Share on other sites More sharing options...
abacab Posted November 22, 2022 Share Posted November 22, 2022 (edited) 37 minutes ago, TheSteven said: Here's the release notes from M1 - assuming the rest have similar tweaks/fixes M1 KORG APP July 21, 2022 22:22 Version 2.3.3 [PC] After updating to version 2.3.2, Cakewalk by BandLab would not open the project properly and initialize the synthesizer. This has been fixed. That's not the latest version. It's the latest release notes. They haven't been updated yet. Edited November 22, 2022 by abacab 1 Link to comment Share on other sites More sharing options...
TheSteven Posted November 22, 2022 Share Posted November 22, 2022 (edited) 29 minutes ago, abacab said: That's not the latest version. It's the latest release notes. They haven't been updated yet. Lol, you're right! That's the info linked in the installer(s) I just downloaded and installed. Looks like the release notes are way out of date on all of them (that I had access to)! The current DLLs are dated 11/8/22. Ran each and they all report that their version is 2.4.0 Edited November 22, 2022 by TheSteven Link to comment Share on other sites More sharing options...
abacab Posted November 22, 2022 Share Posted November 22, 2022 5 minutes ago, TheSteven said: That's the info linked in the installer(s) I just downloaded and installed. Hopefully they will update the release docs soon! Keep checking back here: https://support.korguser.net/hc/en-us/sections/900001101426-Release-Notes 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now