ralfrobert Posted June 16, 2023 Author Share Posted June 16, 2023 Changes in Bitwig Studio 5, Beta 11 [released 16 June 2023] IMPROVEMENTS Instrument Selector, FX Selector, Note FX Selector (Container) devices: All have a panel menu for setting the Mode, allowing notes and other messages to cycle to other layers without using modulators Formant and pitch expression zoom settings are now remembered independently [32882] FIXES Segments (Envelope) Grid/Polymer module: No longer has a Pitch timebase option The Segments (Envelope) modulator still has the Pitch option, as it properly belongs here Arpeggiator (Note FX) device: No longer crashes the audio engine when creating notes below MIDI note 0 [32570] Bend and Pinch (Level) and Ø Bend and Ø Pinch (Phase) Grid modules: Improved numeric stability at extreme (> 95 %) settings [32684] Distortion (Distortion) device: Now has a wider spectrum display, keeping all frequency parameters on screen [32838] Drum Machine (Drum Kit) device: Cells weren't waking up when using Audio Receiver or Note Receiver devices (a regression) [32800] Transfer (Shaper) Grid module: No longer initializes with a click [32849] Audio Sidechain (I/O) Grid module: Is now properly delay compensated [31208] Beat LFO (LFO) modulator: Was constantly restarting when used as a track modulators [32867] Fixed a delay compensation issue with delay devices and plug-ins, that was causing latency on the master [29035] Fixed a crash when selecting Use a template for new Projects, then clicking the ellipsis (…) to specify the template [32807] Signal indicators in The Grid were being painted on top of curve editor windows [32769] Folded note ("drum" editor) mode was dropping selection when scrolling offscreen while selecting [32775] Slice in Place did not work with a reversed audio event [32840] Fixed crash when dragging a drum pad from one project to another [32761] Fixed a crash when copying the modulation(s) from a track modulator to another parameter [32139] Fixed a crash when dragging project or track modulation mappings of track parameters to a modulation source inside a device [32711] Dragging a plug-in from the side browser no longer creates two undo steps (a regression) [32464] Overwriting an existing Smart Collection right after selecting it no longer crashes the app [32679] Browsing in drum machine cells again remembers the previous state/location correctly (a regression) [32765] Rendering of Collection icons was broken in the Pop-up Browser (on the right hand side of the window) and in the Browser Panel (a regression) [32853] Arranger waveform drawing was truncated in particular project [32753] CLAP: Selected plug-in remote control page is now properly restored on project reload [32575] Linux/X11: Fixed some uninitialized xcb response types in the plug-in host Link to comment Share on other sites More sharing options...
Bruno de Souza Lino Posted June 16, 2023 Share Posted June 16, 2023 According to Bitwig themselves: "We're working on updating the user guide." Link to comment Share on other sites More sharing options...
ralfrobert Posted June 20, 2023 Author Share Posted June 20, 2023 Changes in Bitwig Studio 5, Beta 12 [released 20 June 2023] IMPROVEMENTS Browser: Bitwig devices and plug-ins now only offer to Show Presets for that device (and the right arrow for toggling that mode) when the device/plug-in has available presets FIXES CPU performance of Bitwig Studio should be improved (another regression from v4.4) Browser preview was often silent when cursoring though samples [32844] Audio input monitoring no longer breaks after recording audio (a regression) [32927] macOS: Newly saved presets now appear in the browser immediately (a regression in beta 11) MIDI files in sound content locations are being shown (a regression from beta v4.4) [32842] Segments (Envelope) Grid module: Now always starts from 0 zero when receiving a high gate signal [32891] MIDI Program Change (MIDI) device: Automation now works again when routing between different tracks (a regression) [32930] Rectangular selection of automation points was loosing points as they scrolled offscreen (a regression) Copy/paste clip or time selection was always including automation, even when Automation Follows Clip Editing was deactivated [32929] Fixed a rare crash when indexing filenames containing huge numbers (>18 digits) [32630] Clips saved while using manual mappings of device parameters can be selected without crashing the app [30786] Old projects that were saved with modules modulating themselves would crash when converting the module to another kind [30270] Keywords (for searching Bitwig's devices, modulators, and modules) will now offer matching devices with have special characters in their names (Ø, /, etc.) [31801] Fixed a crash with the browser and preset discovery [32330] The history of last remote controlled track / device was lost when switching tracks (a regression) Controller API: fixed a bug that could lead to different TrackProxy elements controlling the same RemoteControls [32756] CLAP plug-ins: Fixed a crash with polyphonic modulations [32763] 2 Link to comment Share on other sites More sharing options...
ralfrobert Posted June 23, 2023 Author Share Posted June 23, 2023 Changes in Bitwig Studio 5, Beta 13 [released 23 June 2023] NEW FEATURES Transfer (Shaper) module: Now has a Unipolar Handling parameter for how negative input is dealt with. Options are: Clip - just outputs the value set at input of zero Reflect - mirrors the curve, letting you draw a symmetric shape from unipolar mode FIXES Transfer (Shaper) Grid module: Now maps the input and output to match the bipolar/unipolar state of the device This is a change to how unipolar cases were handled before; to restore the old behavior, add a Bi → Uni (Level) module before the Transfer Note Delay (Note FX) device: Fixed an issue where it was not reactivating properly [32863] Fixed a potential engine crash after an error on reload of the audio device [32944] Fixed an issue where transients of audio playback could be consumed by delay compensation (regression since beta 9) [32949] Various browser fixes: Pop-up Browser now regains focus when clicking into one of its gray window areas [32871] Restored the close button (X) to the Pop-up Browser when on the All Sources page [32865] Note Clip browser: Clicking on the Note Clip source icon should not change sources [32866] Don't show Update Location (previously called Rescan Location) function in the Browser Settings submenu unless file-system monitoring has been turned off for that location, as it would have no effect Fix crash when opening specific projects [32954] Fixed an assortment of random engine crashes Curve modulators and modules now have a help entry for their browse (folder) buttons 1 Link to comment Share on other sites More sharing options...
Fleer Posted June 23, 2023 Share Posted June 23, 2023 Now for that AU compatibility… Link to comment Share on other sites More sharing options...
ralfrobert Posted September 8, 2023 Author Share Posted September 8, 2023 Latest changelogs: Changes in Bitwig Studio 5.0.7 [released 08 September 2023] NEW FEATURES Controller script added for AKAI MPK mini Plus Controller script added for iCON Platform M+ IMPROVEMENTS Controller integration updated for M-Audio Oxygen Pro Series (Mini/25/49/61/Hammer Pro 88) FIXES Snap to events works correctly in note Detail Editor Panel [33492] Step drawing of expressions in audio Detail Editor Panel no longer misses some boundary events [33529] Expression Spread was not creating individual spread for automation points [33551] Select All did not work properly with closed groups [33425] Double-clicking now open projects in the Browser Panel's File Browser (a regression) [33336] A track's arm, solo, and monitor mode states are now ignored when saving a clip [33260] Duplicated tracks which are colored with "x" in the Inspector were getting a random color (a regression) [33385] Convolution (Reverb) device: Wet Gain control was breaking after dragging in an audio clip. The second time. [33409] Wavetable LFO (LFO) Grid module: Hold Shape during Cycle didn't work as expected [33386] Saving a project with a Grid module selected in the Browser Panel was leading to a crash [33019] When adjusting bipolar controls (e.g. pan, crossfade) from a MIDI controller, it is now always possible to hit the center value [32854] LaunchControl XL controller script: use factory 8 instead of 7 as the 7 sends the wrong CCs [33429] Fixed NoteStep.setTranspose(), which now has a range from -96 to +96 (a regression) Bug when updating the sibling track bank (details) Random crashes while reading preset discovery presets [31088] Changes in Bitwig Studio 5.0.6 [released 15 August 2023] FIXES Message "audio engine appears to be hung" could get shown during playback of certain projects. Changes in Bitwig Studio 5.0.5 [released 10 August 2023] FIXES Better performance when playing very large grid patches. Improved anti-aliasing in Transfer module. [33317] Consolidate now takes deactivated clips into account [32947] Preview play button shown on list entries in the side browser does not work in the file browser tab [33282] Consolidating a launcher clip now keeps its loop settings [33156] macOS: application could crash when running on macOS 14 beta [33261] Midi Clock master timing was early during pre-roll [33319] Controller-API: the selected remote controls page was lost when switching projects in some cases Launchpad Pro Mk3 extension is now compatible with the latest firmware (1.2.2) LaunchControlXL regression: it now is possible again to switch back to template 1 [33367] 1 1 Link to comment Share on other sites More sharing options...
Fleer Posted September 8, 2023 Share Posted September 8, 2023 Sweet. Still got free updates, but I guess 5.1 won’t be. Link to comment Share on other sites More sharing options...
Sander Verstraten Posted September 8, 2023 Share Posted September 8, 2023 55 minutes ago, Fleer said: Sweet. Still got free updates, but I guess 5.1 won’t be. When is your update plan running out? Mine runs out in Jan, I hope they'll put out 5.1 before that, so I still get 5.1.x updates. Link to comment Share on other sites More sharing options...
Fleer Posted September 8, 2023 Share Posted September 8, 2023 37 minutes ago, Sander Verstraten said: When is your update plan running out? Mine runs out in Jan, I hope they'll put out 5.1 before that, so I still get 5.1.x updates. Ran out in April, one day after 5 was announced Link to comment Share on other sites More sharing options...
ralfrobert Posted September 22, 2023 Author Share Posted September 22, 2023 Changes in Bitwig Studio 5.0.8 [released 22 September 2023] New Features DAWproject files can now be exported (from the File menu) and imported This new format allows transferring project data from one audio sequencer to another More information on the format is at: https://github.com/bitwig/dawproject#readme Fixes When selecting a scene, the Inspector Panel was too wide in some languages Saturator Distortion device and Shaper Grid module: Were consuming too much CPU when fed with silence on AMD/Intel CPUs 1 1 Link to comment Share on other sites More sharing options...
Royal Yaksman Posted September 23, 2023 Share Posted September 23, 2023 I have a small issue with part of the OP title. Not a deal? With all the stuff they roll out, I actually feel like Bitwig is almost a continuous deal. I find if a new feature doesn't make me go, "Oooooo." There's always a video of someone using that new feature in a way that I wouldn't have thought of, and then that makes me go, "Ooooooo. Shiny!" (Of course now that I have said this out-loud the company is probably going to immediately fall into complete disrepair and me and this comment will be over here choking on a foot.) 🤑 YMWACVLQSSTIMCARWAAERITSTCTYEUIRBWYAAALFEUOWJHBQCTRTSYHPOYH (Your Mileage Will Absolutely Completely Vary Like Quite Spastically So That It Might Cause A Rift Within An Already Existing Rift In The Space Time Continuum That You End Up Immediately Right Back Where You Are And Are Left Feeling Entirely Unsure Of What Just Happened But Quickly Come To Realise That Somehow You Have Poop On Your Hands) 2 Link to comment Share on other sites More sharing options...
Sander Verstraten Posted September 23, 2023 Share Posted September 23, 2023 I wonder what is up with the plugin format they are building with U-He? I haven't heard much about since it was released. Link to comment Share on other sites More sharing options...
ralfrobert Posted September 23, 2023 Author Share Posted September 23, 2023 2 hours ago, Sander Verstraten said: I wonder what is up with the plugin format they are building with U-He? I haven't heard much about since it was released. CLAP is very much alive, being implemented by more and more plugin developers. 1 Link to comment Share on other sites More sharing options...
ralfrobert Posted September 23, 2023 Author Share Posted September 23, 2023 8 hours ago, Royal Yaksman said: I have a small issue with part of the OP title. Not a deal? With all the stuff they roll out, I actually feel like Bitwig is almost a continuous deal. I find if a new feature doesn't make me go, "Oooooo." There's always a video of someone using that new feature in a way that I wouldn't have thought of, and then that makes me go, "Ooooooo. Shiny!" ... Yes, it is a continuous deal... which costs an awful lot of money. If you are willing to spend it, you get a lot back, but it's the most expensive DAW per year if kept up to date. Decide for yourself. 2 Link to comment Share on other sites More sharing options...
ralfrobert Posted September 27, 2023 Author Share Posted September 27, 2023 Changes in Bitwig Studio 5.0.10 [released 27 September 2023] NEW FEATURES Controller extension added for Derivative's TouchDesigner This script by Derivative provides an integration between Bitwig Studio and TouchDesigner, for dynamic live visuals and more More info here Controller script added for Native Instruments's Komplete Kontrol S-Series Mk3 Link to comment Share on other sites More sharing options...
Solidos Posted September 27, 2023 Share Posted September 27, 2023 Full Changelog for 5.0.10: Changes in Bitwig Studio 5.0.10 [released 27 September 2023] New Features Controller extension added for Derivative's TouchDesigner This script by Derivative provides an integration between Bitwig Studio and TouchDesigner, for dynamic live visuals and more More info here Controller script added for Native Instruments's Komplete Kontrol S-Series Mk3 Improvements Browser choices are now preserved when dragging devices from side browser into project and later continuing in the popup browser When a controller is pinned to a device, it now remains there — even if the Pop-up Browser is open Next Action time settings can now be adjusted, even when disabled [33253] Fixes DAWproject: Files using EQ can be imported regardless of band order/slope parameters Fix issue where pinned devices would switch to preview device. Now pinned means pinned. After inserting/duplicating a scene, the view no longer autoscrolls to the cursor scene [33461] Cutting time from the Arranger — available from [CTRL]+ [SHIFT]+[X] ([CMD] + [SHIFT] +[X] on Mac) — was sometimes copying the wrong data to the clipboard when a plug-in window was open [33611] Drum Machine device: Is now correctly retaining internal return automation when copying and pasting [33563] Drum Machine device: Send automation for an internal return chain is now maintained when the device is duplicated [33634] Controller API: Track.createCursorRemoteControlsPage is now persistent, so that projects will reopen on remote pages that were selected via controller [33571] Windows: Opening a project from the Explorer now also works if the path contains special characters [33618] Windows: Fixed some random application crashes [30047] 1 1 Link to comment Share on other sites More sharing options...
Solidos Posted October 18, 2023 Share Posted October 18, 2023 Changes in Bitwig Studio 5.0.11 [released 09 October 2023] Fixes DAWproject: Audio expressions (gain/pan/transpose/formant) were being exported but not imported Moving note expression events using arrow keys would sometimes scroll the view poorly [33627] Recording automation from a manually mapped button (controller or computer keyboard) properly records a discrete change, instead of a slight ramp [33772] Fixed various, random audio engine crashes when bouncing in real-time or recording (with write errors) [31749] Dragging an impulse file into the device chain no longer crashes the app [33719] Note Sidechain modulator: Was not working under certain conditions [33453] Tablet display profile was defaults to showing the Clip Launcher or Arranger Timeline exclusively Fixed a potential crash when hovering over a beat time field while app is closing [30775] Fixed a crash when undoing an insert while hot swapping the same device with a controller connected Link to comment Share on other sites More sharing options...
Solidos Posted October 18, 2023 Share Posted October 18, 2023 (edited) https://downloads.bitwig.com/5.1 Beta 1/Release-Notes-5.1 Beta 1.html Bitwig Studio 5.1 is now in beta testing for users with an active Upgrade Plan. It features 10 new characters, Grid-powered audio FX, expanded voice stacking, audio quantize, and more. Get out your sonic finger paints. NOTE: Do not use a beta version to work on important projects! Project files created or saved with the beta cannot be opened in previous versions of Bitwig Studio. So if you are opening working projects, save copies of them for beta testing (instead of saving over your original files). If you think you have found a bug, please drop us a line at beta@bitwig.com. Please be sure to include: steps to reproduce the issue operating system audio interface and any other hardware information if this is a new issue in v5.1 And if you get a crash report dialog from the program, please click Send Report. Adding a comment is most helpful, but this can still be useful to us regardless. What's New in Bitwig Studio 5.1, Beta 1 [released 18 October 2023] 10 New Characters — Modern Filters and Waveshapers, Ready to FX Welcome three modern character filters Each use a nested structure, taking a general outer filter and placing a second 'filter' inside the feedback circuit Each algorithm is unique, with a mix of modes for different behavior, tuning controls, inner modulation, and tweak points Drive and Resonance / Feedback are connected, so pulling down Drive a little can often leave more room for resonance to take over, etc. etc. Welcome five character waveshapers Each remaps incoming audio to its current shape, transferring each level to the shaper's position Each shaper has its own morphing path, by moving or modulating the single Drive control A little high-level math keeps the shaping tight and smooth via the Anti-aliasing option Also along for the ride: a formant filter (Vowels) and a modeled ring Diode shaper > 1. New Filter+/Sweep/Grid module: Fizz (Filter) A modern Character filter for spreading harmonic nodes around Has a bit of a moving formant sensibility Takes place inside a stereo, resonant low-pass filter, with standard options: Drive to affect the incoming signal level Main Cutoff Frequency control Stereo input for cutoff modulation, with Cutoff Modulation Amount set in semitones Key Tracking Amount, for using incoming note pitches to affect the cutoff buss For this algorithm, additional controls include: Feedback Gain, which feeds or chokes the nested filter Feedback Cutoff Frequency, for tuning the nested filter A bipolar Color control, which shifts the placement and variation of formant peaks An Alternate Color toggle, for a reorienting and different tuning of the circuit > 2. New Filter+/Sweep/Grid module: Rasp (Filter) A modern Character filter that can scream or whisper Creates resonant peaks on top of the standard filter Takes place inside a stereo, resonant filter, with standard options: Drive to affect the incoming signal level A Filter Type setting, to switch between an outer Low-pass filter or a Band-pass model Cutoff/Center Frequency control Stereo input for cutoff modulation, with Cutoff Modulation Amount set in semitones Key Tracking Amount, for using incoming note pitches to affect the cutoff buss A Resonance Limit Inspector Panel (or Q Limit via right-click context menu) control, for adjusting when the filter model saturates For this algorithm, additional controls include: Resonance, which enunciates or chokes the nested filter A Brightness Mode setting, with various options for how resonance peaks move: Shift - Gently moves past the main cutoff, usually emphasizing a central peak Double - A tuned mixture of the Shift and Gravity modes Gravity - Pulls and pushes toward the main cutoff with a bit of magnetism The bipolar Brightness control applies the set Brightness Mode, bending the new resonant nodes thru various harmonic — and inharmonic — positions > 3. New Filter+/Sweep/Grid module: Ripple (Filter) A modern Character filter with hyper-resonance Three elemental modes provide different levels of fun/wreckage that often anchors to harmonics of the incoming signal Takes place inside a stereo, resonant filter, with standard options: Drive to affect the incoming signal level Main Cutoff Frequency control Stereo input for cutoff modulation, with Cutoff Modulation Amount set in semitones Key Tracking Amount, for using incoming note pitches to affect the cutoff buss For this algorithm, additional controls include: Bipolar Feedback Gain, which feeds or chokes the nested filter Feedback Cutoff Frequency, for tuning the nested filter A Nature setting, with various models for the filter: Earth - Gently moves past the main cutoff, usually emphasizing a central peak Wind - Focused feedback, ready to blow Fire - Broad feedback, with some motion Two additional toggles, Tweak Feedback and Tweak Feedforward, modify those points in the filter circuit, either dampening or expanding resonance A Low Quality toggle (in the Inspector Panel or via right-click context menu), for adjusting the filter's tuning and reducing the CPU load > 4. New Filter+/Sweep/Grid module: Vowels (Filter) An Inspired filter that produces vowel sounds Can be used several ways, including: Setting (or hard modulating/automating) a single vowel Setting and morphing anywhere between two and five vowels Any combination, all with different configurations and vowel models Standard filter controls include: Drive to affect the incoming signal level A Resonance Limit Inspector Panel (or Q Limit via right-click context menu) control, for adjusting when the filter model saturates Five Vowel Position choosers are available, located around a central, bipolar Vowel Blend knob: Vowel Blend at -100 % uses only the nearby Vowel Position 1 Vowel Blend at 0 % uses only the nearby Vowel Position 3 Vowel Blend at +100 % uses only the nearby Vowel Position 5 Vowel Blend corresponds to Vowel Position 2 at -50 % and Vowel Position 4 at +50 %; if set to vowel sounds, only those values will be heard; if set to None (the default), the surrounding vowels will be blended perfectly there Each position offers 27 different vowel sounds to choose from: i - As in “see” or “eat” y - With a rounded w-, like “we” ɪ - As in “sit” or “hit” ʏ - A medium oo, like “ooze” ɨ - An exagerated oo, like “eww” (gross) ʉ - A slow oo, like "ooh!" (surprise) ɯ - As in “hook” or “book” u - As in “pool” or “cool” e - As in “say” or “rain” ø - With a closed -l, like “ool” ɘ - Partly closed, as in “eh” ɵ - As in “foot” or “would” ɣ - Partly closed, as in “uh” o - First sound in “coat” or “bold” ə - As in “run” or “ton” ɛ - As in “get” or “rent” œ - With a round -l, like “ole” ɜ - Partly closed, as in “ah” ɞ - Partly closed, as in “aw” ʌ - As in “fun” or “come” ɔ - As in “more” or “floor” æ - As in “cat” or “hat” ɐ - With a subtle -r, like “are” a - First sound in “hi” or “fight” Œ - With an open -l, like “all” ɑ - As in “far” or “star” ɒ - As in “want” or “job” Each Vowel Position can be set in two ways: Clicking on any position opens a pop-up menu of all available vowels sounds and description texts Clicking and dragging on any position starts moving thru the vowels sounds, for a quick workflow with audible results (if audio is passing) In The Grid, a stereo in port (Vowel In) is available for adding to the Vowel Blend value Profile selects which set of vowel data to use, with choices including: Women 1 - an older data set, with average values from several women Women 2 - a modern data set, with average values from several women Female - values from one individual female Men 1 - an older data set, with average values from several men Men 2 - a modern data set, with average values from several men Male - values from one individual male Kids - average values from several children The Topology chooser (on the right edge of the module) sets the structure of the filter, from three choices: Cascade - Serial low-pass filters; a bit better for traditional text-to-speech sounds LP/BP - Low-pass and band-pass filters, processed in parallel; a synthier, Autobahn-friendly vibe LP/BP/HP - Low-pass, band-pass, and high-pass filters in parallel; adds a slight bit more highs Several parameters influence the tuning of the internal filters in use: Cutoff Pitch Offset moves the internal filters by semitones The Cutoff In port and its associated Cutoff Modulation Amount attenuator allows stereo manipulation of the Cutoff Pitch Offset Note: While this is like moving the cutoff of a normal filter up and down, the result is different and you might want to start by disabling pitch modulation The Cutoff Frequency Offset (in the Inspector Panel or via right-click context menu) allowing linear frequency manipulation, which can be interesting for formants Resonance adjusts the relative sharpness of the internal filters > 5. New Filter+/Sweep/Grid module: Push (Shaper) A Character soft clipper with a detailed curve One Drive parameter for going thru the module's unique path, with optional high-order Anti-aliasing (AA) > 6. New Filter+/Sweep/Grid module: Heat (Shaper) A Character S-shaped clipper that starts soft but can drive hard One Drive parameter for going thru the module's unique path, with optional high-order Anti-aliasing (AA) > 7. New Filter+/Sweep/Grid module: Soar (Shaper) A Character soft wave folder that makes the quietest parts loud One Drive parameter for going thru the module's unique path, with optional high-order Anti-aliasing (AA) > 8. New Filter+/Sweep/Grid module: Howl (Shaper) A Character wave folder puts different parts of the signal into loud focus One Drive parameter for going thru the module's unique path, with optional high-order Anti-aliasing (AA) > 9. New Filter+/Sweep/Grid module: Shred (Shaper) A Character non-linear wave folder for subtle cancellation or big-time artifacts One Drive parameter for going thru the module's unique path, with optional high-order Anti-aliasing (AA) > 10. New Filter+/Sweep/Grid module: Diode (Shaper) A Parametric shaper modeling the classic circuit in a modern way Offset parameter for biasing the signal to be asymmetric Drive parameter for pushing the signal to bend Low-pass Cutoff Frequency control for rounding it off and restoring some order One for going thru the module's unique path, with optional high-order Anti-aliasing (AA) New device: Filter+ (Filter) A dead-simple FX box, letting deploy any waveshaper and filter from The Grid directly onto a track Pick one of ten filters from three categories: Structural choices for classic circuits: Low-pass LD - A ladder filter, with variable slope and nonlinear option Sallen-Key - 16 various low-, high-, and band-pass configurations SVF - Highly resonant multimode (high-, low-, band-pass & notch) filter Comb - A comb filter with timed feedback & dampening Inspired options that speak: Low-pass MG - A Moog-style low-pass filter, including drive character XP - An Oberheim-style multimode filter, with 15 configurations) Vowels - A morphing vowel filter, with various models, pitch and frequency offsets Character ideas for something new: Fizz - A nested filter circuit that can sparkle, shimmer like a phaser, or bump Rasp - A filter that adds brightness around the cutoff, so it can scream or whimper Ripple - A hyper-resonant circuit for playful feedback, subharmonics, or even distortion Pick one of 14 waveshapers, sorted for you: One Knob classics with a singular control: Chebyshev - Nonlinear shaper that can target harmonics Distortion - Gentle distortion Hard Clip - Simple, hard clipper Quantizer - Signal resolution reducer Wavefolder - Reflects each cycle back on itself Parametric options that offer more control: Diode - Classic circuit model, used for biasing and clipping Rectifier - Independent positive and negative attenuators Saturator - Waveshaper with loud/quiet settings + bipolar skews Transfer - A freely drawable, segmented waveshaper, with BWCURVE-file support Character ideas, for unique paths and simple control: Push - Soft clipper with a detailed curve Heat - S-shaped clipper that starts soft but can drive hard Soar - Soft wave folder that makes the quietest parts loud Howl - Wave folder that puts different parts of the signal into loud focus Shred - Non-linear wave folder for subtle cancellation or big-time artifacts Signal flow is simple: audio input → waveshaper → filter Pre FX and Post FX chains are also available, for nested other devices or plug-ins A modulation section offers two built-in sources: A stereo LFO module gives four waveshapes with sync-able Rate and Timebase controls The incoming audio itself provides a second modulation source, with optional low-pass filtering and rectification (to make the modulation go in only one direction) Both LFO and Audio Mod sources are normalled to the filter's cutoff buss, with attenuators on the filter These sources are also available as modulators for free control elsewhere, including shaper Drive controls, other filter controls, or control of any nested devices in the Pre FX and Post FX slots Additional Inspector controls for Stereo Spread and Wet Gain Other parameters are available in the device's Expanded Device View, which exposes the embedded Grid patch. These include: LFO Skew (to bend the shape), Phase, Phase Offset (R) (for the right channel, controlling the stereo effect), Bipolar, and Sync to Global Transport toggle (on by default) Pitch Buss toggle (with = icon) to not attenuate the audio mod source, giving it a ±10 octave range A simple Pan module, for placing the signal Being a Grid-powered device, polyphony and voice stacking are uniquely available in this audio FX device By right-clicking the device header, functions are available to: Convert to Sweep, for bringing all settings into that device Convert to FX Grid, for full patching control New device: Sweep (Filter) A performable effect devices, combining and blending waveshaper and filter from The Grid Everything said about Filter+ is true of Sweep, except Sweep has a second filter slot and generalized controls for this setup Joint Frequency Control provides control of both filters in a range ±3 octaves An Invert option flips the direction that the Joint Frequency Control applies to filter B, allowing you to move their cutoffs in opposite directions The Routing Blend control smoothly moves thru various device configurations: At 0 %, only filter A → waveshaper is heard 50 % is a parallel routing, with device audio input going straight to both filter A (then out) and to waveshaper → filter B (then out) 100 % is fully serial, with device audio input going to filter A → waveshaper → filter B Positions in between blend these routings, for a continuous range Stereo Pan is similar to the Joint Frequency Control, except it applies the same stereo adjustment to both filters Positive (rightward) settings move right channel cutoffs up and left cutoffs down, and negative (leftward) settings move left channel cutoffs up and right cutoffs down Good, quick stereo-ization control Voice Stacking Expansion Voice Stacking remains a unique feature of Bitwig Studio, allowing any polyphonic device — including compatible plug-ins — to create multiple layers of sound 16 is now the maximum, allowing each note played to trigger up to 16 independent voices When voice stacking is active, any single voice in the stack can be soloed This temporary gesture makes sound programming easier and fast This option is available in the device Inspector Panel, along with the Voice Stacking setting The old Voice Stack (Note-driven) modulator has been replaced by two modulators in the new Voice Stacking category: Stack Spread offers the original four spread modes, along with eight new ones: Flipped - Provide simple reciprocals [1, 1/2, 1/3, ... 1/n] Straight - Gives harmonic relationships [1, 1/2, 1/4, ... 1/2ⁿ], whether for pitch or rhythms Primes - Inverted prime numbers [1, 1/2, 1/3, 1/5, 1/7, 1/11...] Golden - The Fibonacci sequence [1, 1/2, 1/3, 1/5, 1/8, 1/13...] Rand+ - Creates a unipolar random value for each voice (at note on), with all values adding up to 1 Rand+ ↕︎ - A scaled, stronger version of Rand+, tending towards more large values Rand± - Creates a bipolar random value for each voice (at note on), with all values adding up to 0 (zero) Rand+ ↕︎ - A scaled, stronger version of Rand±, tending towards more large values Voice Control provides 16 individual modulator sources for programming any of the 16 voices uniquely With more spread modes, you may want to insert more than one Stack Spread modulator Previous presets or projects using the Voice Stack modulator are automatically converted to use the new modulator(s) Three new Grid modules offer a new level of control when voice stacking is active: Voice Stack Info (I/O) provides two signals: Voice Stack Index outputs a polyphonic signal of the current voice's index within the stack Normalized by default, the signal is ideal for creating your own spread modes (maybe try running it thru a Bend [Level] module, or any other shaper) Voice Stack Size outputs a mono signal reflecting the current voice stacking setting, which could be useful for dynamic gain adjustments, etc. Voice Stack Mix (Mix) is a processor that provides a mixer interface for each voice in the stack This provides a Level, Pan, Solo, and Enable control for each voice in the Inspector Panel Each control can be mapped, modulated, or automated The module can be inserted anywhere in a patch — and as many times as you like. This isn't just for audio. Voice Stack Tog (Mix) is a processor the provides simple Enable controls voice each voice Like Voice Stack Mix, this is a processor that can be inserted anywhere in a patch and is free to be mapped or modulated This module could be useful in many cases, including with Note Grid (before the Gate Out, for example) Since the Voice Stack Mix and Voice Stack Tog modules share an Enable control for each voice, swapping between the two modules will keep these particular data Since Filter+ and Sweep are based on FX Grid, there are now three audio FX devices that can use polyphony and voice stacking Simple idea: try a band-pass filter in Filter+, enable Voice Stacking, and spread the cutoff > New Polymer/Grid module: Bite (Oscillator) A Techniques-driven oscillator, offering exponential FM, hard sync, PWM, and ring mod from dual oscillator feedback Anti-aliasing and internal feedback allow for some very crisp, fresh, and/or modular analog sounds Internal Oscillator A & B are identical, each providing seven waveshapes with Pulse Width controls, as well as fixed Saw and Sine options Like the Union oscillator, the oscillators exhibit some smooth analog drift when Pulse Width, for example, is moved Oscillator B can pulse-width modulate (PWM) Oscillator A Oscillator A can do exponential frequency modulation (xFM) on Oscillator B Oscillator A can also hard SYNC Oscillator B: SYNC is a useful way to use exponential FM without breaking the pitch of Oscillator B Oscillator B also has its own Pitch Offset control, for setting (or modulating) more interesting hard sync waveshapes A trio of mix controls set the output level for oscillator A, oscillator B, and a ring-modulated mix (RM) of the two The Grid module version has a special Independent Mono Mode toggle in the Inspector Panel This flattens the module to a mono output This also allows individual oscillator targeting via the in ports, routing left channel inputs only to Oscillator A and right channel inputs to Oscillator B Onset Power and Audio Quantize Our new, higher-resolution onset detector from v5.0 provides better data and allows for new functions Audio clips/events now have an Onset Threshold setting This value affects playback, setting which onsets are preserved by stretching Onsets below the threshold will appear more dim, and if affected clips/events are onscreen with onsets showing, this will be updated while dragging the Onset Threshold setting This value is in the Audio Event > Stretching area of the Inspector Panel The setting is available for audio using either the Stretch, Stretch HD, or Slice when the algorithm has its Transient Rate set to at Onsets A new Audio Quantize… function is now available for audio clips and events Set the desired beat grid in the dialog Adjust the Onset Threshold within the dialog to set which onsets should get quantized (via stretch markers) Again, if the clips/events are visible when the dialog is open, they and their onsets will be brightly previewed in the background The Amount, Shuffle, and Humanize settings determine the movement and position of quantized Click OK to make it so. Boom. An additional Audio Quantize (no ellipsis […]) function is available to skip the dialog and directly apply your last values Other functions that can use onsets (Slice in Place, Slice to Drum Machine, Slice to Multisample) now have the Onset Threshold control, interface, and visual preview mechanism Some Mixer Love The various panels in the Mix view and Mixer Panel have been reordered, made scrollable, and show/hide is better ways (when available space changes) A permanent left column (below scenes, when visible) has been added for the mixer view toggles and section labels (Devices, Sends, I/O, etc.) When multiple tracks are selected, adjusting one track will adjust them all, whether it is volume, mute, output routing, etc. The left column also has a horizontal divider line that can be dragged ups and down to resize the volume faders and their level meters The peak hold level for each track is now visible at most heights, just above the level meters Hovering over the peak hold level shows updated stereo information about the track level Clicking the peak hold level clears it for all tracks, as well as the small red peak indicators at the top of each meter Tracks can also be made much narrower now The mini device view of the mixer now shows clickable icons for native Bitwig devices that have an Expanded Device View Clicking the icon scroll the device (in the Device Panel) onto screen and opens the Expanded Device View above EQ+ and EQ-5 devices offer the same functionality by clicking on their mini equalizer view The same is true in the Inspector Panel, except the icons are always visible Holding [SHIFT] when resizing on track resizes all tracks in that section to the same size Holding [SHIFT] now performs the same function when resizing Arranger track lanes Track headers have been redesigned to give more space to track names, and to make selections and relationships more obvious and clear New Features A non-destructive Normalize function is now available on audio clips/events, inserting a Gain expression value for the clip (or for each audio event, when multiples are selected) New Set Clip Start function is available in the Detail Editor Panel, sliding the clip contents to the current time selection Available in the Time menu or in the right-click menu Container devices with three or more chains (Multiband-3, XY FX, and XY Instrument) now have mute / solo controls for each chain Container devices with two chains (Multiband-2, Mid-Side Split, and Stereo Split) now a solo button for each chain FX Grid (The Grid) device: Now has an Auto-gate from Notes parameter If you enable an FX Grid patch to be polyphonic, now you don't have to change your patch at all as some simple enveloping is applied for each note played The Auto-gate toggle is in the Note Source section of the Inspector, with an Auto-gate Release Time setting right beside it Auto-gate is on by default and has no effect if your patch is using True Mono Both Filter+ and Sweep also have this Auto-gate option New Toggle In (Mix) Grid module: Switch between two incoming signals, with a button directly on the module New Toggle Out (Mix) Grid module: Switch between two outgoing paths, with a button directly on the module New Pitch Buss (Pitch) Grid module: Pitch summing buss with attenuators for up to six inputs Attenuators are set in a range of ±36 semitones Inputs two to six also have a Thru option (a clickable = icon) that adds that incoming signal without attenuation, good in the case of actual pitch signals, etc. New Invert (Math) Grid module: Gives a button to reverse polarity (× -1) of the incoming signal, with Stereo-ness option New Reciprocal (Math) Grid module: Gives a button to flip (1/x) the incoming signal, with Stereo-ness option Chebyshev (Shaper) Filter+/Sweep/Grid module: Now has a Remove DC option to subtract the function's inherent DC Support for Softube Console One devices [33559] DAWproject files can now be exported (from the File menu) and imported by Bitwig Studio This new format allows transferring project data from one audio sequencer to another More information on the format is here Controller script added for Derivative's TouchDesigner This script from Derivative provides an integration between Bitwig Studio and TouchDesigner, for dynamic live visuals and more More info here Improvements Zooming behavior with shortcuts now centers around the active selection if present, or otherwise around the mouse location if present over the editor Various editing improvements: Make Legato function now treats chords together After using the Knife tool to slice, the second clip/event is now selected Time selection tool can now move beat markers when hovering marker head Eraser tool can now be used to delete beat markers and onsets The Arranger loop length can now be extended by clicking outside of the loop region The Arranger loop length can now be shortened by using [CTL]-click ([CMD]-click on Mac) inside the current Arranger loop Dragging in new beat markers from onset locations has moved to top edge of the Detail Editor Panel, where the onset locations are shown [ALT]-dragging now slides the waveform under a beat marker Dragging automation events now feels smoother Better beat marker visibility Instrument Selector and FX Selector devices: May now process chains in parallel Test Tone (Utility) device: Now has cleaner Saw and Square waveforms Transfer (Shaper) Filter+/Sweep/Grid module: The Reset Curve function (available on right-click) makes a three-point identity function for better custom editing Saturator (Shaper) Filter+/Sweep module: Has a Pop-out Editor, making all parameters available even when outside of The Grid ≥ and ≤ Grid modules (Math): Now have an Exact Matches Only setting, which can be disabled from the Inspector or the context menu [33705] Bounce only processes the track's prerequisites (and not the whole project) Support for sample-accurate automation recording from controllers and plug-in windows New function to Delete All Project Automation New function to Delete All Automation Owned by Selection VST3 and CLAP: We now honor any plug-in's realtime requirement CLAP: Uses MIDI MPE if the plug-in asks for it Fixes Now correctly update the project's PDC, when activating a plug-in for offline rendering results in a latency change Touch automation mode now works when plug-in parameters are changed from within Bitwig Studio's GUI [33768] @ralfrobert could you update the title of this topic? Thanks Edited October 19, 2023 by Solidos 1 Link to comment Share on other sites More sharing options...
ralfrobert Posted October 19, 2023 Author Share Posted October 19, 2023 Title updated 1 Link to comment Share on other sites More sharing options...
Solidos Posted October 24, 2023 Share Posted October 24, 2023 Changes in Bitwig Studio 5.1, Beta 2 [released 24 October 2023] Improvements Quantize Audio improvements: Applying Quantize Audio to raw audio events applies the user's Default stretch mode set for On recording / bounce (set in Dashboard > Settings > Behavior) After executing the function, visible waveform editors will switch to the Stretch page, displaying beat markers Mixer improvements: The Big Meters section is back, available when the mixer's Clip Launcher Panel is hidden Meters scale now disappears one "width-step" later CLAP: Updated to version 1.1.9 Fixes Export and Bounce in Place are fast again, even when a project contains plugins (a regression) [33892] Quantize Audio fixes: From the dialog, the numeric Onset Threshold control wasn't working when dragged [33901] Fixed a crash when used on a metaclip [33863] Rasp (Filter) module: Renamed (and clarified description for) its Feedback Limit parameter Voice Stack Mix (Mix) Grid module: Has correct labels for voice 5 [33933] Chorus+, Flanger+, and Phaser+ (Modulation) devices: Could sound different when opened from previous work [33909] Vocoder (Filter) device: Was broken in v5.1b1 [33924] Humanize (Note FX) device: Was not passing note offs when panel was hidden, causing hanging notes [33975] Note Sidechain modulator: Now shows user-provided name in the modulator pane [33619] Mixer fixes: Faders were sometimes overlapping at maximum height at various interface scalings [33895] Output chooser for multiout VST chains now scales correctly when resizing mixer [33932] Reference waveforms (shown under notes) in the Detail Editor Panel now uses a stronger color Realtime export now works, no longer performing a normal offline export (a regression) [33894] Fixed a crash when copying Launcher clips with automation [33883] Enabling MIDI clock no longer crashes the audio engine [33885] Application could sometimes crash when clicking the "maximize" device button from a mixer or Inspector Panel devices section [33777] Plug-ins: Fixed performance regressions [33931] Fabfilter Pro-Q 3 VST3: Solo band function works again [33910] Softube Console 1: Now shows the correct name and color for group tracks 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now