Search the Community
Showing results for tags 'midi'.
-
So, after recording a MIDI track, I did end up missing a couple notes and decided to go edit the notes in piano roll, rather than re-record that section. However, I seem to be having all sorts of problems simple adding notes to an input(I have been programmed into simplicity with how FL Studios edits midi, so I'm coming off just click to add); am I missing something? I sometimes have to double click to even add a note, honestly.
-
Hi Hopefully someone can point me in the right direction with a problem I'm having. I've used Sonar X3 Producer with Native Instruments Komplete Audio 6 for a few years quite happily, and often connect my Yamaha midi keyboard to my Komplete Audio 6 interface, in order to play virtual instruments live through Sonar. It still works fine now. Recently I treated myself to the new Komplete Audio 6 Mk 2. Initially I had some audio signal latency problems, which I managed to fix. However I'm still having problems with playing virtual instruments through my Yamaha keyboard. Although I've made sure the latest driver and firmware update is installed, I can now only play one note at a time when using the Mk 2, and either Sonar or the interface also thinks the note is playing forever. I can see that from the virtual representation of the on -screen keyboard that the key is still being held down, when it isn't. If I press the key on the virtual keyboard curing my cursor, it works fine, but not if I generate the signal from my external Yamaha keyboard - which is no good for playing in live time. I'm sure there must be an easy way round this. I've rarely bought anything that didn't have to be tweaked or reconfigured before it worked perfectly, so where there's a will, there's usually a way - this one has me stumped. I've tried changing midi cables and re-installing the driver but no luck. Does anyone have any ideas please? Thanks in advance. Andy -
I am relatively new to Cakewalk because I used it just a little until now. I am creating a track and some days ago I was able to set some midi groove-clips so they repeat: I put notes into a measure, then activated the groove-clip and edited its boundary. The groove-clips play as expected. Today I tried the same thing for the drum track but I experienced something strange: when I activate the groove-clip function on the clip (one measure) it stretches out up to the end of the song but it is like I changed its length, not the repeat range. So I end up with a long clip almost empty because just a measure has notes. What am I doing wrong? Thank you in advance
-
All of a sudden, my MIDI tracks lool like audio files set at maximum volume and then clipped. The piano roll reflects the blue track above. They play fine; I just don't like the looks of them. Hard to see what's going on. Any ideas?
-
I checked the Soft Synth software and supposedly it is supported. Is this the right way to do it?
-
Hi guys, I’m pretty new to the whole producing thing, but everything’s been going fine until now. I was making music whilst traveling just using my keys on the laptop as MIDI input, with my headphones plugged in only. When I got home, I plugged my audio interface in too, and now I can’t hear anything in the tracks I made. I also can’t hear live feedback when I play MIDI instruments. I’ve tried changing my input and output settings so that none of them are from my laptop & are instead from my audio interface, but nothing seems to be working. Also tried changing the driver to ASIO & just about every other option available. Can anyone help? Thanks!
-
Hello everyone, I have a problem with MIDI recording. I'm working on a huge project (+50 audio tracks , 1hour aprox) and I want to record live some MIDI instruments. But it doesn't seem to work. You can draw it manually, but not record it live via a MIDI controller. I did it before, when the project wasn't so big and it worked. And when starting a new project, I add an instrument and everything works. So everything seems to be a problem of CPU space. But I made a copy, deleted every track except from one general mix and it didn't work. But then again, I didn't save and reboot, so I'm not sure. I'm thinking about freezing some tracks, but I'm not sure. Can I save the project with freezed tracks and unfreeze them afterwards? Thank you for your help. My gear is an i7 3rd gen processor with SSD Drive for CPU and a external 1 Tb HDD for Data. My MIDI controller is Arturia Keystep 32, and the VI I'm using is LABS by Spitfire Audio. But I changed the controller and the VI and none helps
-
I can't use anymore Roland JX-03 and Roland JU-06 because there is a bug in the MIDI channel selection. Since last update, when I select the MIDI channel assigned to one of the synth the sound is full of bugs.... whereas when I select any other MIDI channel the sound is playing perfectly... Is someone having the same problem with hardware synth and MIDI?
-
Get 25% off Groove Monkee Classic Rock MIDI Drum Loops --- discount code: dfq25 https://groovemonkee.com/products/classic-rock "hard-hitting pack was inspired by legendary bands" -
Im having some trouble configuring my Maschine MK2 into Cakewalk to do the midi stuff I want it to do. I literally have no idea what to do.
-
Something simple ... Add the .midi extension to those recognized by Cakewalk when you try to open a midi file. These files come from the OSX platform. These are simple midi files but because of the extension are not visible when we try to open them through the Cakewalk application. You have to change the extension from .midi to .mid so that it can be read by CbB..
-
Get 25% off the Groove Monkee Blues Classics MIDI Drum Packs --- discount code: dfq25 https://groovemonkee.com/collections/all/blues "Straightforward 12-bar blues with intros, fills and outro fills."
-
Hi everyone! I am using Cakewalk about one week and I have a question. How can I make same plugins not to depend on each other? At the picture you can see that I set some plugins on first channel with sampler but this plugins also work at the second channel (as you see, there is not any plugins on second channel) and I really don't know how to solve this case. I worked in FL Studio and there was button "make unique" etc. Maybe this button also exists in Cakewalk?👌 I just wanna make these channels independent and use plugins independently on every channel. Best wishes and thanks for attention
-
Is it possible nowadays to loop record a drum VST now so that each take you're recording a separate instrument and building the drum beat by making multiple passes? aka the first pass I do kick drum, then the next pass I do snare and I hear the kick drum from the last pass, and so on? Previously that was not possible.
-
Get 10% off IntelliScore Ensemble Audio-to-MIDI Converter --- discount code: digifreq10 http://www.intelliscore.net/ "Score music faster with this automatic music transcription software."
-
I have been pulling what is left of my hair out trying to hear and or see my soft synths being manipulated by my LPK25 MIDI Keyboard Controller. I have changed so many settings in so many places I am just lost! I have worked in the computer world for over 25 years, Engineering, Licensed Surveyor, Geographic Information Systems Director and Developer and this Audio stuff is hard to understand, hurting my ego, lol! Oh, I was a musician in the mid 70's for 6 years. What are the separate areas or parameters that need be set up and in what sequence? I see Audio settings and MIDI Devices "in-out", ASIO and EEM and Microsoft? What should I do in what order? I simply want to record synths/music with my headphones using my VST's and Akai LPK25. Thank you for any help, this old hippy needs some help. -
Hi! I have an Midi Fighter 3d and I want to remap each midi note from it to another midi note so I can use it as an Midi Instrument. Is there a way to do this?
-
Hey! I recently bought Alesis V25 controller and I can't make it work with Cakewalk. Though it works just fine with Ableton Live. I set up everything as in every instruction I found online. Still I don't get any sound. I'm new to Cakewak so maybe I'm just doing something wrong. Please help. ðŸ˜
-
groove monkee Groove Monkee Rock MIDI Drum Pack - Get 25% off
Scott R. Garrigus posted a topic in Deals
Get 25% off the Groove Monkee Rock MIDI Drum Pack --- discount code: dfq25 https://groovemonkee.com/products/combo-1-midi-rock-pack "Rock grooves & fills in 3/4, 4/4, 5/4, 5/8, 6/8, 7/4, 7/8, 9/8, 12/8." -
When using many MIDI CC envelopes it can sometimes be difficult to tell them apart. It would be nice if custom names could be assigned to MIDI CC envelopes, see suggested screenshot #2. Thanks for a great product!
-
Hi, Does anyone use an Arturia Controller with Cakewalk? I got the Keylab Essential 49 and would like to use the transport controls, and as many other physical buttons that I can. However it doesnt come pre-mapped for Cakewalk. I went to preferences and tried all 5 presets (Act Midi Controller, Cakewalk Generic and Mackie Control, XT and C4) and no luck. Any help would be greatly appreciated.
-
Hello, I'm trying to connect cakewalk with Nektar impact lx88+, did all the necessary configurations(inatalled - Impact_GX_LX+_SE49_Cakewalk_Support_Win_1.1.3 and from cakewalk selected LX88+ from this path -----> Edit > Preferences > MIDI - Devices: input = impactlx88+ & MIDIIN2, output = Impactlx88+ ) and if i create a instrument track by selecting input as impactlx88+=omni and output as - Electric piano by enabling MIDI SOURCE, Synth property, synth audio(tried both stero/mono), and MIDI output. But still i cannot hear any sound please suggest me the best option to begin with my musical journey ...thanks :)
-
Hi friends, I occasionally use midi files that contain meta data. (not that I understand that stuff). I believe that controller 91 and 93 are not present w/in the GPO data, but they are available in the PRV view. Do those have any effect - ie do they negatively effect GPO or the FXs send like reverb or chorus in CbB. Can they be eliminated from the midi file? Thanks
-
Hi - I am suddenly unable to have either Cakewalk or Sonar Platinum 'see' and midi data from my Roland A-800 controller, when everywhere else - Midi Ox running on desktop, stand-alone synths, VST hosting software, all other programs are properly 'seeing' and reacting to midi note on/off events transmitted by the controller. I have restarted Cakewalk, and Sonar Platinum, no change. I have physically pulled and reconnected the midi controller's USB cable to the computer, no change. Also no change turning the midi controller off/on while still connected by the USB cable to the computer. The midi controller (Roland A-800 Pro) IS selected in Midi Devices in Preferences. Again, there is no problem with the controller, as far as other programs behaving as expected and reacting to midi note events when pressing keys on the controller. Lastly, if I play notes with my mouse, in plugin synth instances with keyboards in their UI, the notes trigger proper playing of those note events, so the plugins are working properly in Cakewalk/Sonar, but NOT when I play notes on the midi controller. And, this all just started happening yesterday. I am at a loss, and HOPING you folks can help me figure out what the heck caused this, and how to resolve it. a PROFOUNDLY hopeful - Bob Bone -
Hi Folks. Can somebody help me please. I have several Midi tracks in Cakewalk that I use with Halion Sonic. Sonic has 3 modes for program changes: Gm, Multi and OFF. Mine is set to OFF. I set my Halion Sonic mixer to desired values.... As soon as I stop and play from beginning, volume parameters are resetting in Halion Sonic... I have tried moving volumes to desired position and save VST preset and re-open, but have same issue. Is it possible to disable those program changes in Cakewalk tracks... or what would be the right way to deal with this? Thank you in advance!
