-
Posts
1,197 -
Joined
-
Last visited
Everything posted by Max Arwood
-
All that math sounds right but your ears are the best tool. I usually have at least 5 reverbs on the bus. Some times I have 8 . I usually have 30-35 buses - why - CPU! It is the way to go with effects reverbs, compressors, echo, pitch, and other special effects. Envelopes on busses and tracks can control parameters to change any serving in all those plugins too! Max Arwood
-
Thanks for the info. I’ve just. never look at any of those. Max Arwood
-
I have Platinum installed but don't see that FX Chain Presets folder? C:\Cakewalk Content\Cakewalk Core\FX Chain Presets\Anderton Collection\Processors Where could I find it? Max Arwood
-
Look under preferences Audio - configuration file. Near the end Of the file is a setting called ThreadSchedulingModel. If it is not set to 2 change it to 2 and try the song again. 2 is the most common setting. Some systems work better with 3. You can try both. It could have gotten changed. Hope that helps.
-
8.6 win 10 Layla 24/96 Max Arwood
- 27 replies
-
- echo layla
- windows 10
-
(and 1 more)
Tagged with:
-
There is also Clip groups - locks clips in a group press [ If you move 1 all move. If you add effects all grouped clips get that effect. https://www.cakewalk.com/Documentation?product=SONAR X2&language=3&help=Arranging.22.html Max Arwood
-
Thanks for listening! I like it both ways. I wanted to move the strings in and out for some variation. I will probably lower them. They are a bit much in places. Still got to figure out a better ending too. Max Arwood
-
Did you find the midi offset I sent info to you about? Max Arwood
-
I still am only a BIAB beginner even though I have been upgrading every few versions since before they numbered by the year released! Thinking about spending a little more time with it. Thanks for the GREAT piece you did you did! It encourages me to try again!! Thanks, Max Arwood
-
Converting some old songs I played. This one was originally played through "The Grand" converted to CFX concert grand today. Let me know what you think. https://soundclick.com/r/s8dlbx Thanks for listening, Max Arwood
-
I think you could go inside the take lane and do the fades there. Max Arwood
-
A straight line all the way across would be easy in CSMultiCompander. High and Low different -> I have some old midi piano songs I did a while back. I wanted to move my midi to a newer piano sample. The newer stuff is way better than older ones! When I did the left hand was banging and the right was fine except a few really high notes. MidiEq balanced the notes to match the older midi so the hands and noted were more even. It is very hard to draw lines/curves with the pencil tool. I wish it had a modifier key to help smooth the line as you pencil draw it. You might go to his forum and request this features on the plugin, and the EQ shelves. Only a few people here, but that way your post won't get lost in all the other post! LOL!! https://viramor.com/posties/ Hope to see you there. MidiEq tweaked piano song -> https://soundclick.com/share.cfm?id=14039946 Max Arwood
-
Very nice!! Nice backup vocals too! Max Arwood
-
BIAB - You are really good with it. I sure wish I had more time to play with it!!! Wow you did a great job. And yes those background harmonies we really good. Max Arwood
-
Midi EQ will do this. Just use the large drawing scale. A cool feature is to use the mouse wheel to do individual notes. I ask Variorum to add a shelf in the next version. I sure hope he does. It is a little tricky trying to get the shapes of the curves the way you need them. I will say there is nothing like this anywhere! It is a one of a kind plugin for now! Max Arwood
-
http://forum.cakewalk.com/Offset-for-Midi-recording-m3532820.aspx Under Sync and Caching Max Arwood
-
Melodye 5 - Region FX stops audio engine
Max Arwood replied to Ryan Sheeler's topic in Cakewalk by BandLab
I don't think Melodyne was made to insert region effect while playing. Is that what you are doing? I usually stop playback, cut the section away from the main clip (to make it smaller) , create edit region . Then in Melodyne I edit and tweak the notes - play the clip a few times, exit melodyne, bounce the clip and continue. I have used this procedure from version 1 through version 5 - Never had problems this way. 1 Too big of a clip - asking for problems - cut up sections 2 You don't bounce it when finished - same asking for problems - It will probable open ok next week and it might not - don't have to Re-Edit stuff - once is enough LOL!! Hope you get it figured out. Max Arwood -
Dropout First Couple Plays Then Fine
Max Arwood replied to razor7music's topic in Cakewalk by BandLab
You might try to plug in some speakers, then open Cakewalk. It looks like Windows is seeing the card but not activating it because there are no speakers connected.?? I hope Robert can help some! Max Arwood- 56 replies
-
Wow Blades - I guess should upgrade to the 3G lol! Nah, I guess I should go up the totum pole a little higher 🙂 Max Arwood
- 27 replies
-
- echo layla
- windows 10
-
(and 1 more)
Tagged with:
-
Wow that was a really great cover! I can't believe how close you are to the original. Max Arwood
-
I sure hope someone can help get you going again. I talked myself out of regressing to windows 7 multiple times!! I knew it was close to a must do soon upgrade. I have also thought about a new sound card since mine is even older that your!! lol!! To get the bang of my old card - 8 ins-outs SPDIF, ADAT..... I will just cost more than I need to spend right now. My computer is a really old i7. I have thought many times about moving up. Just need to go slow and figure out what would help the most and do that first. I have other friends that use Echo products. They don't seem to have problems on win 10 and BL Cakewalk. Max Arwood
- 27 replies
-
- echo layla
- windows 10
-
(and 1 more)
Tagged with:
-
New find - Last night I was doing a bunch of MIDI editing - when I noticed the MIDI track in PVR had no keyboard on left side. It only had some tiny numbers. I finally figured it out - that track was frozen. Is that new? Can we get the Keyboard back? I was trying to calculate home harmonies, but no keyboard. Max Arwood
-
I have an even older echo card. I have Layla 24/96. It seems to work fine. Don’t know if my latency could be lower with a newer card. Mine a pci card. It seems to work really good with thread scheduling 3 .Latest Windows and layers Bandlab cakewalk I have a really old i7 processor. I think my drivers are V 8.3. I would like to rent a high end card for a week to see if it is any different! Max Arwood Did you turn off Cortina and all the background stuff that goes on in windows 10? did you upgrade or fresh install?
- 27 replies
-
- echo layla
- windows 10
-
(and 1 more)
Tagged with:
-
[CLOSED] Cakewalk 2020.05 Early Access 2
Max Arwood replied to Morten Saether's topic in Early Access Program
I did restore points two different ones. No Help. Restored Macrium backup from 06-01. no help. Backup software trashed older versions for lack of space - What bad timing. Copied several old versions of .ins to new version. MOTU seems to have all the input channels but only 1 output channel. I reinstalled the MOTU drivers - several versions. Did a hardware reset on the MOTU. Still nothing. How can I tell if its hardware of Software? Where does Cakewalk store the friendly names of the midi drivers? Where does cakewalk get the information from windows about the number of channels? Also My Tranzport control surface is missing in cakrwalk but is loaded in the too but . I don't think this is Beta version related. My machine was running the best is had run in years just the other day. *****((Could someone move this to the proper place for help)).********* MOTU MIDI Express 128 5yrs old . Any ideas would. be appreciated. Thanks, Max Arwood -
Not out yet - premiering next week range of Emvoice free extended range C3-G3 and major updates. Soon with MIDI listening. Max Arwood