jesse g

My BCF200. I loved that little midi controller. I sold it and it helped to buy me my first Mackie Control Universal.

Peter, You are welcome very much.

I tried today to get a third plugin from UAD today using the code, UADTUESDAY, but they won't allow me to use the code. I kept receiving the banner at the top "Coupon code "UADTUESDAYS" is not valid." 😒 So, So, Sad.

I too was able to get my plugins for 14.00 each also. I purchased the Manley VOXBOX Channel while at work and used my coupon for $25.00 off and code UADTUESDAY at checkout. . When I got home I was able to purchase the Studer® A800 Tape Recorder for another $14.00 after I received another coupon for $25.00 off and using the coupon code, UADTUESDAY at checkout again.

Wookie, Thanks again. Do you have any idea what may be causing it? This is the first time in my many years here having a problem with posting. It just suddenly turn red and I can't do any thing else until it is reviewed. Really, it's not that bad. but it's just a little annoying, that's all. Thanks for the rescue 👍

Hello Pete, This is the part that was killing me. Here is the answer. Look in the 18i20 manual on page 28. You will see when using ADAT that the input channel is not the actual channel from the expansion unit, therefore channel 1 of the ASP880 does not equal ADAT 1, it equals it equal ADAT 3. On page 28 1. You have the first 8 input channels of the 18i20 matching S/PDIF input 1-8 (These are you actual 18i20 input channels) 2. Next you have Loopback 1 and 2 3. Then you have Digital In 1 and 2 for actual S/PDIF channels from the 18i20 4. Now for the EYE opener (Look over the 18i20 chart because the ADAT ins Automatically go to the ADAT Outs. CH 3 IN is CH 13 OUT ) Look carefully ADAT Inputs Start at Channel 3 on the ASP880, so that will = ADAT 1.1 in the 18i20 ADAT Input Channel 4 on the ASP880 will = ADAT 1.2 ADAT Input Channel 5 on the ASP880 will = ADAT 1.3 ADA T Input Channel 6 on the ASP880 will = ADAT 1.4 ADAT Input Channel 7 on the ASP880 will = ADAT 1.5 ADAT Input Channel 8 on the ASP880 will = ADAT 1.6 ADAT Input Channel 9 on the ASP880 will = ADAT 1.7 ADAT Input Channel 10 on the ASP880 will = ADAT 1.8 =========================================== ADAT Output Start at Channel 13 on the ASP880, so that will = ADAT 1.1 out for the 18i20 ADAT Output Channel 14 on the ASP880 will = ADAT 1.2 ADAT Output Channel 15 on the ASP880 will = ADAT 1.3 ADA T Output Channel 16 on the ASP880 will = ADAT 1.4 ADAT Output Channel 17 on the ASP880 will = ADAT 1.5 ADAT Output Channel 18 on the ASP880 will = ADAT 1.6 ADAT Output Channel 19 on the ASP880 will = ADAT 1.7 ADAT Output Channel 20 on the ASP880 will = ADAT 1.8 This is where the Friendly naming in Cakewalk comes in so you will know which input is which. ADAT 1.1 in Cakewalk will now become "ASP880 Input ADAT 1" ADAT 1.2 in Cakewalk will now become "ASP880 Input ADAT 2" ADAT 1.3 in Cakewalk will now become "ASP880 Input ADAT 3" The Outputs Start with Channel 13 ADAT 1.1 in Cakewalk will now become "ASP880 Output ADAT 1" ADAT 1.2 in Cakewalk will now become "ASP880 Output ADAT 2" ADAT 1.3 in Cakewalk will now become "ASP880 Output ADAT 3" And so on.. , or however you want to name it. Call it ADAT or Channel I hope this helps

Thanks Wookie 👍

I see it them when I go to Sonar https://www.groove3.com/browse/by-category/daw/sonar Sonar Explained Sonar Platinum Advanced

Yes, that shows in Cakewalk. Opps, sorry Wookie when I was typing this up I forgot to add the third stereo option. 👍

Look on Reverb.com for the one you want first and see if it is being sold at a lower price. No reason to pay the retail price when he is just learning and may need a larger one later on. Spark Mini on Reverb

Kontakt 7 full runs great inside Cakewalk as an instrument and as a standalone by itself. You should try uninstalling it from the computer and then re-install again from NI

My updates worked well without problems.

Hello folks, I purchased a Focusrite Scarlett OctoPre because I am a hardware junkie and I love recording and mixing with hardware and plugins. I needed a way to connect extra hardware as I ran out of channels with my Focusrite Scarlett 18i20 and so, the Focusrite Scarlett OctoPre justified the purchase and allowed the use of 8 more external connections. I had the hardest time getting this set up in Cakewalk By Bandlab because all of the videos I watched didn't say anything much about DAW Setup, but here is where reading is fundamental. The Audio Interface manual spells it all out if you just read it. It is important that you know the In and Out table for the mode being used for the Audio Interface you are using. Audio Interface connected to the computer via USB-C = Focusrite Scarlett 18i20. Expander unit being used to provide 8 extra channels of I/O = Focusrite Scarlette OctoPre Only have the Audio Interface on at this port for setup. ======================================== To expand your audio Interface, you will plug a Toslink (ADAT) cable into the primary Audio Interface (Scarlett 18i20) ADAT IN port on the back of the unit. Then plug the other end of the Toslink (ADAT) cable into the ADAT OUT port on the back of the Preamp you are using, (Focusrite Scarlett OctoPre). Open the audio configuration software for your Audio Interface. For my Scarlett 18i20, I use Focus Control. The simplest way of syncing the devices is to set the Clock Source of the Audio Interface to ADAT, next set the Sample Rate to either 44.1 kHz or 48 kHz. The Sample Rate used here will allow for 8 channels to be used within the Audio Interface from the Preamp. Finally, set the I/O Mode to S/PDIF RCA and Save and Close out of your Audio Interface Software and shut down your Audio Interface. Next, turn back on your Audio Interface and at least for the Focusrite brand, you should have everything already set up for you in the software. The ADAT digital format can carry up to 8 channels of audio and this depends on the sample rate you wish to use. 44.1/48kHz - 8 channels 88.2/96kHz - 4 channels 176.4/192kHz - 2 channels For Focusrite: In the Focus Control Software, set the following: (Monitor Outputs) select Playback 1-2 (Line Outputs 3-4) select Playback 3-4 (Line Outputs 5-6) select Playback 5-6 (Line Outputs 7-8) select Playback 7-8 (Line Outputs 9-10) select Playback 9-10 (S/PDIF Outputs 1-2) select Playback 11-12 ADAT Outputs 1.1-1.2 select Playback 13-14 ADAT Outputs 1.3-1.4 select Playback 15-16 ADAT Outputs 1.5-1.6 select Playback 17-18 ADAT Outputs 1.7-1.8 select Playback 19-20 Click Monitor Outputs, and it should now be highlighted black, now click the plus "+" symbol to the right and highlight Analog numbers 1-8 or click the number pairs if you want to add Stereo channels to Focus Control. If using S/PDIF click that also and then select ADAT channels 1-8 either as stereo pairs or as individual channels, If you want to add Loop Back, select that too . For the Software Playback, Click the "+" symbol and click the numbers 1-8, as individuals outs or as pairs. Next, save as a preset or just quit You can decide if you want the above to remain stereo or mono channels. Save and Close out of your Audio Interface software and shut down your Audio Interface. Now turn on your Preamp, for me I use the Focusrite Scarlette OctoPre. On the unit set the Clock Source to INTERNAL, set the SAMPLE RATE to 44.1 kHz or 48 kHz, and then turn on the Audio Interface to make sure they sync up. You should see GREEN lights or the word SYNC appear. For the Focusrite OctoPre, there is only a green dot on the front screen, the lock itself doesn’t turn green. In Cakewalk go to Edit > Properties and you will see the the Focusrite inputs and outputs. The have to be renamed in order to properly assign the correct input and output to the correct channel. INPUT DRIVERS: Set the Friendly Naming Convention in Cakewalk: Focusrite Input 1/2 Focusrite Input 3/4 Focusrite Input 5/6 Focusrite Input 7/8 Focusrite Loopback 9/10 SPIDIF 11/12 Focusrite ADAT IN 1/2 Focusrite ADAT IN 3/4 Focusrite ADAT IN |5/6 Focusrite ADAT IN 7/8 Apply, OK. When in the Track Pane, the IN’s and OUTs will work with the inputs and outs selected for the Focusrite 18i20 or the Focusrite Scarlett OctoPre. You will see when selecting inputs in Cakewalk Focusrite Input 1 L = Channel 1 L Focusrite Input 1 R = Channel 2 R Focusrite Input 1 S = (Stereo) 1L/2R Focusrite Input 3 L = Channel 3 L Focusrite Input 3 R = Channel 4 R Focusrite Input 3 S = (Stereo) 3L/4R Focusrite ADAT IN 1L = Channel 1L Focusrite ADAT IN 1R = Channel 2 R Focusrite ADAT IN 3 S = (Stereo) 1L/2R and so on...

What updated for me: Analog Dreams -> 2.1.1 Ethereal Earth -> 2.1.0 Hybrid Keys -> 2.1.0 Kontakt 7 -> 7.60 Sous Sessions -> 2.0.0

Frank, Updating tonight when I get home from work! Thanks Frank What updated for me : Analog Dreams -> 2.1.1 Ethereal Earth -> 2.1.0 Hybrid Keys -> 2.1.0 Kontakt 7 -> 7.60 Sous Sessions -> 2.0.0

Fleer The Manley VOXis on sale for $149.00 and accepts the additional 50 dollars off coupon. The final price is $99.00. Savings Code: DBX50 Expires: 09/18/2023 11:59 PM PST Coupon only valid on purchases of $89 or more. Cannot be used on Antares Auto-Tune Realtime Advanced or C-Suite plug-ins.

I though it was my browser, but then I tried other websites and I was able to get to them without any problems. That's when I knew it had to be a Cakewalk problem.

They've already begun, start shopping they will be going fast.

I've been watching his channel for a while and I like his evaluations on audio hardware. He is really funny when takes a sledge hammer to stuff!!

Nice !!

Shane, Say it isn't so,!!! Never stop recording or mixing, you continue until they remove your lifeless stiff rigamortis fingers from the control surface faders.

Nice one 95133 🖕

Bapu, I think there will be way more in the New Sonar that will not be available in the CbB version. I don't think were being told about everything that will be included in the release. I had a trial of Studio One 6 Pro and I liked using it very much, especially the Pipe Line XT with my outboard gear. So I am thinking about purchasing the Studio One 6.2 Pro version for my Studio Desktop and just using the freebie version of CbB on my laptop. However, I want to make sure that the new Cakewalk Sonar has a chance to remain my favorite DAW. The one I choose will be the one that will be installed on my Desktop Computer and the one I will mainly use,

I really like CbB, but I really don't care for the External Insert section. I like using Pipeline XT in Studio One 6. It has a better view and the managing of it is better as well. Bakers, can you change the External Inserts in CbB ???? Please !!!

Folks, Get the TEAMGROUP T-Force CARDEA Zero Z440 2TB DRAM SLC Cache, 3D TLC NAND, NVMe PCIe Gen4 M.2 2280 Gaming SSD Read/Write 5,000/4,400 MB/s TM8FP7002T0C311 for only $79.99 Buy at ~~>Teamforce on Amazon