Terry Kelley

And they would have to add the option to select how far ahead. It's easiest to mark the area (record punch-in automatically enables) then set the now time what every amount you want. Hit the big R and have at it.

Cakewalk.exe Meaning ...? Never to push two times for effects that are the best? (Old joke) This happens when I try to export a mix (project is 48k/24bit) to a wave (any rate or depth.) Edit: Well turning off 2X over sample lets it work. I dunno folks ...

I'm getting this same error now: "An internal error occurred while processing the mixdown. The operation was unsuccessful." Nothing has changed that I can think of. Is there any way to trace the issue? It's doesn't generate a dump file. I get it when I select Export->Audio->Wave but not File->Export->Audio without changing any settings. It happens on both .039 and the EA.13. Not consistently though but once it happens, it won't go away without restarting the program.

I often open multiple tracks to compare and adjust.

Even with the update, I think there is still something amiss with EZD 3. I notice that EZD3 doesn't always go back the to starting measure when you start and stop the transport (if go back is enabled.) . Sometimes it doesn't even restart. If I can nail down a consistent issue I will post on the Toontrack forum. But there is little the Cakewalk developers can do about it. If you have a dump file, you can open it in notepad, ignore the gibberish and towards the top end you will find the offending module listed if the crash was in a module/plugin. It looks like this and might give you some indicate on what is going on or if the issue appeared in Cakewalk itself. Sending the dmp to the developers might let them give you a bit more insight to what is happening. Below isn't an EZD3 crash, it's just an example of what's in the file. C a k e w a l k A p p l i c a t i o n C r a s h D u m p - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - D u m p F i l e : C : \ U s e r s \ t e r r y \ A p p D a t a \ R o a m i n g \ C a k e w a l k \ C a k e w a l k C o r e \ M i n i D u m p s \ M B 1 5 4 8 _ 2 4 _ 0 5 3 0 2 0 2 2 _ 1 5 5 3 2 3 . d m p E x c e p t i o n C o d e : c 0 0 0 0 0 0 5 d F a u l t i n g M o d u l e : C : \ P r o g r a m F i l e s \ C a k e w a l k \ C a k e w a l k C o r e \ C a k e w a l k . e x e A p p V e r s i o n : 2 8 . 0 6 . 0 . 0 0 8 U s e r : t e r r y S e r i a l : C B C O 1 0 0 H B J D I P K U E E I F P r o j e c t F i l e : D : \ C a k e w a l k s o n g s T B K \ M B \ M B 1 \ M B 1 5 4 8 _ 2 4 . c w p I s P l u g i n C r a s h : 0 T o t a l P h y s M e m 1 6 7 1 4 5 1 2 K B A v a i l P h y s M e m 1 0 3 4 5 7 3 2 K B - - - - - - - - - - - - - - - A u d i o S e t t i n g s - - - - - - - - - - - - - - - A l w a y s O p e n A l l D e v i c e s 1 D y n a m i c A r m 1 D y n A r m O n l y I n p u t s 1 M u l t i P r o c 1 M i n i m i z e D r i v e r S t a t e C h a n g e s 1 M M C S S 1 W a v e R T 0 C l o s e O n L o s t F o c u s 0 D e f a u l t B i t D e p t h 2 4 D e f a u l t R e c B i t D e p t h 2 4 D e f a u l t R e n d e r D e p t h 2 4 D e f a u l t S a m p l e R a t e 4 8 0 0 0 P l a y b a c k B u f f e r S i z e 1 0 B o u n c e B u f f e r S i z e 1 0 C o r e 2 P l a y T i m i n g M a s t e r A u d i o B o x A S I O D r i v e r O u t p u t L e f t R e c o r d T i m i n g M a s t e r A u d i o B o x A S I O D r i v e r I n p u t 1

I've been getting this crash just doing stuff. I can't say it's anything common although it seemed to be around deleting clips or undo. I rolled back and it appears to have stopped. MB15 48_24_05302022_155323.zip MB15 48_24_05302022_153406.zip

When I apply VocalSync, the editor (knob window) disappears . I have to open the editor again . Has anyone found a way to stop this? I don't see why it wants to disappear.

Yeah, some people can't control themselves. Well then support. They might be of help. https://helpcenter.celemony.com/M5/support

New update that appears to work is out.

You might want to post this on the Celemony/Melodyne forum.

From the Toontrack forum I suspect it might be a wait. It appears other DAWs are having issues too.

I've found there are fine subtleties that I can't express in the staff view where I can draw them in PRV. Mostly fine timing.

If you have EZ Drummer 2 still installed, insert it into the project and then replace it with EZ Drummer 3. It works for me. Right click on the instrument icon and then select replace synth (or replace synth on this track or all tracks.)

I found a work around for the crashing EZ Drummer 3. If you have EZ Drummer 2, add it and then replace it with EZ Drummer 3. For me it works every time. So with some playing I determined you can start with 2 and swap to 3 and it works. In addition, I noticed that if someone can add EZ Drummer 3 where it doesn't crash for them and then sends me that file, that file will load and not crash on my system. Good Luck! Terry

You're going to be told to post that on the Melodyne site. Once the developers see the issue isn't CW, they will push you in that direction. It's possible Melodyne might contact CW if they think the issue is in CW. I just updated to Melodyne 5.2 and EZD3 and Melodyne is fine and EZD3 won't work. I'm on Windows 10 21H2 and an i7 processor.

For me, Acon VST3 works fine on my Win 10 i7 system. But I think you summarized it nicely.

The three I know of are using ASIO (and all different) but that is interesting. I wouldn't expect the driver to be involved with just adding the VST but it's all certainly a complicated process.

Well, yeah.

What's concerning is that they don't work on several DAWs. It's just not Cakewalk having the problem. I don't understand how this got by the testers.

Of course. The error is the standard memory violation: c0000005. Seen one ... Changing the Exception Severity just makes Cakewalk blow it off but TT EZD3 still crashed with the violation. The fault is in EZdrummer 3.vst3. D u m p F i l e : C : \ U s e r s \ t e r r y \ A p p D a t a \ R o a m i n g \ C a k e w a l k \ C a k e w a l k C o r e \ M i n i D u m p s \ P l u g i n s \ U n t i t l e d _ 0 5 0 3 2 0 2 2 _ 2 0 2 3 5 7 . d m p E x c e p t i o n C o d e : c 0 0 0 0 0 0 5 d F a u l t i n g M o d u l e : c : \ p r o g r a m f i l e s \ c o m m o n f i l e s \ V S T 3 \ E Z d r u m m e r 3 . v s t 3 A p p V e r s i o n : 2 8 . 0 2 . 0 . 0 3 9 U s e r : t e r r y S e r i a l : ************************************** P r o j e c t F i l e : D : \ C a k e w a l k s o n g s T B K \ U n t i t l e d I s P l u g i n C r a s h : 1 T o t a l P h y s M e m 1 6 7 1 4 5 1 2 K B A v a i l P h y s M e m 1 0 3 1 2 2 2 4 K B Side note: It works on my friends W8.1 machine running 2021.12. Go figure. I did a rollback to that version and it still crashed.

There is something wrong with the new EZD3. Who's fault it is is pending the finger pointing session. EZD 1 and 2 still work fine.

I'm getting a crash on EZD3 also. I submitted a ticket to CBB and Toontracks.

I'm getting and instant crash when trying to add it to new project or existing one. I submitted a ticket.

I am getting a crash of EZD3 trying to install it in an empty project. If hangs up CW if I try and install it on an existing track. Dump file is 6.2MB so I can't include it. I submitted a ticket.

We all ask questions like this at one time or another. Join the club.