David SG Ferringer Posted January 24, 2021 Share Posted January 24, 2021 Just had the first crash in nearly a year. Link to comment Share on other sites More sharing options...
Noel Borthwick Posted January 24, 2021 Share Posted January 24, 2021 1 hour ago, Gary Fox said: Thank you, Noel. That explains part of an issue I have. I sent in a support ticket asking your team how to provide more technical details about my crashes with the early access release. Cakewalk is just disappearing when trying to load projects, but not leaving any dump files, at least as far as I can tell. I asked if there might be some file somewhere when it crashed that I could send to them. Here is what is odd about the issue. Sometimes the project opened in safe mode, sometimes it wouldn't. There is a Soundtoys plugin on this project, and IK Multimedia as well. I know IK hasn't always played nice with Cakewalk in terms of being responsive to fixing issues; so I wondered if that was it. It also seemed to load all the plugs, but then crash when the "Loading synth information" phrase came up. The synths are Addictive Drums 2 and NI's Kontakt. I did a rollback and the project opens without issues in the earlier version. So, if there is a file lurking somewhere I can send, I will be happy to do so. A big thank you to you and the team for keeping this DAW fresh and up-to-date. Bugs happen, they're a part of progress. Cheers, Gary UPDATE: Got the automated email with the steps to find the crash files. I checked the normal locations; sadly there are no DMP files for the crashes. Hi @Gary Fox, We haven't got a report about Kontakt related issues but its possible that some modules do the same. I will post a build for you to try once its ready so you can verify if it fixes your issue. If not we can troubleshoot some more. Thanks for your patience. Link to comment Share on other sites More sharing options...
thegaltieribrothers Posted January 24, 2021 Share Posted January 24, 2021 Hi, I have upgraded to the latest version of CbB but now I am getting an error message when trying to open projects which were working fine 30 mins ago (see attached). I can open projects in 'Safe' mode but all volume and pan settings are lost so this is no use. Is there a button or way to uninstall the latest version as I have never had an issue with CbB before this update? Thank you for your help. 20210124 CbB Error Message.docx Link to comment Share on other sites More sharing options...
Noel Borthwick Posted January 24, 2021 Share Posted January 24, 2021 Just now, thegaltieribrothers said: Hi, I have upgraded to the latest version of CbB but now I am getting an error message when trying to open projects which were working fine 30 mins ago (see attached). I can open projects in 'Safe' mode but all volume and pan settings are lost so this is no use. Is there a button or way to uninstall the latest version as I have never had an issue with CbB before this update? Thank you for your help. @thegaltieribrothers every release has a rollback installer so you can easily go back to the prior version. See the first para in the release notes. Also can you confirm if you are running SoundToys plugins or what other plugins or synths are in your project. We have a fix for this issue which we will make available shortly later today if you want to try it. Link to comment Share on other sites More sharing options...
Noel Borthwick Posted January 24, 2021 Share Posted January 24, 2021 On 1/23/2021 at 12:42 PM, Glenn Stanton said: mine shows up as "Cakewalk Core" - i think this is the path to the caller app I got a reply from Waves. They are on it so I'm sure it will be fixed soon. Link to comment Share on other sites More sharing options...
thegaltieribrothers Posted January 24, 2021 Share Posted January 24, 2021 Hi Noel, I have now rolled-back and everything is working fine again. I am using Soundtoys Echo-boy, Waves plugins and Focusrite plugins - is there a quick way to generate a list without checking each individual track? I'll give the fix a go if you send me the link accordingly. Thank you for your help. Link to comment Share on other sites More sharing options...
Noel Borthwick Posted January 24, 2021 Share Posted January 24, 2021 Hi folks, Thanks for the great feedback. There is a hotfix installer available that addresses the most important issues that were logged so far. If you were affected by any of those issues please install it and report back if it addresses your problems. @Helene Kolpakova @Spectrum424 @Promidi @Andres Medina @Andrey_rbk @Osman Hemidov @Gary Fox @thegaltieribrothers 1 2 Link to comment Share on other sites More sharing options...
Klaus Posted January 24, 2021 Share Posted January 24, 2021 Unfortunately I too have problems with 2021.01 (build 86) and AZ Controller like @Heinz Hupfer mentioned above. After a couple of fader or knob movements Cakewalk reacts sluggish when using my Control Surfaces, e.g. to select a track I have to press the corresponding button 2 or 3 times instead of one; MIDI values for volume, pan, send etc. don't respond correctly to knob and fader movements like before. Refresh Frequency setting is 75ms and Allow10msControlSurfaceRefresh flag is not used. Rolling back to version 2020.11 works, no problems with my controllers and AZ Controller. Best, Klaus Link to comment Share on other sites More sharing options...
Spectrum424 Posted January 24, 2021 Share Posted January 24, 2021 2 hours ago, Noel Borthwick said: Hi folks, Thanks for the great feedback. There is a hotfix installer available that addresses the most important issues that were logged so far. If you were affected by any of those issues please install it and report back if it addresses your problems. @Helene Kolpakova @Spectrum424 @Promidi @Andres Medina @Andrey_rbk @Osman Hemidov @Gary Fox @thegaltieribrothers @Noel Borthwick I can happily report back that all the projects that didn't open is now working OK. Thanks for a quick solution and all your hard work! /CJ 2 1 Link to comment Share on other sites More sharing options...
msmcleod Posted January 24, 2021 Share Posted January 24, 2021 17 minutes ago, Klaus said: Unfortunately I too have problems with 2021.01 (build 86) and AZ Controller like @Heinz Hupfer mentioned above. After a couple of fader or knob movements Cakewalk reacts sluggish when using my Control Surfaces, e.g. to select a track I have to press the corresponding button 2 or 3 times instead of one; MIDI values for volume, pan, send etc. don't respond correctly to knob and fader movements like before. Refresh Frequency setting is 75ms and Allow10msControlSurfaceRefresh flag is not used. Rolling back to version 2020.11 works, no problems with my controllers and AZ Controller. Best, Klaus @Klaus, @Heinz Hupfer - I've checked the behaviour of the MackieControl.dll , and can't find any difference in responsiveness with CbB. The MackieControl.dll hasn't changed at all for this release. As we've not done anything specific to how control surface messages are handled, I can only assume that AZController is doing something that is causing the latest Cakewalk to either get in some sort of a message loop between CbB & AZController, or causing unnecessary screen updates. I'll look into this deeper, but on the surface (no pun intended!), it looks like AZController is doing something it shouldn't be... or at least doing something it should be, but far too often! 2 Link to comment Share on other sites More sharing options...
Klaus Posted January 24, 2021 Share Posted January 24, 2021 Thanks for looking into it, Mark! I will ask Alexey in his AZ Controller Forum. Best, Klaus Link to comment Share on other sites More sharing options...
solarlux Posted January 24, 2021 Share Posted January 24, 2021 Hello I made little video about arranger track. When i delete arranger track section in timeline it works perfect but when i delete it from second view in arranger view it works unexpected 1 Link to comment Share on other sites More sharing options...
thegaltieribrothers Posted January 24, 2021 Share Posted January 24, 2021 Hi Noel, 2021.01 hotfix (build 86) did the trick - we're cooking on gas again! Thank you for your help. regards paul Link to comment Share on other sites More sharing options...
Elena Kolpakova Posted January 24, 2021 Share Posted January 24, 2021 3 hours ago, Noel Borthwick said: Hi folks, Thanks for the great feedback. There is a hotfix installer available that addresses the most important issues that were logged so far. If you were affected by any of those issues please install it and report back if it addresses your problems. @Helene Kolpakova @Spectrum424 @Promidi @Andres Medina @Andrey_rbk @Osman Hemidov @Gary Fox @thegaltieribrothers My issue was resolved by the hotfix! Thank you so much bakers, you're the best!!! ? Link to comment Share on other sites More sharing options...
Andres Medina Posted January 24, 2021 Share Posted January 24, 2021 3 hours ago, Noel Borthwick said: Hi folks, Thanks for the great feedback. There is a hotfix installer available that addresses the most important issues that were logged so far. If you were affected by any of those issues please install it and report back if it addresses your problems. @Helene Kolpakova @Spectrum424 @Promidi @Andres Medina @Andrey_rbk @Osman Hemidov @Gary Fox @thegaltieribrothers Articulation Pane working again - Thanks a lot. You are the best. Link to comment Share on other sites More sharing options...
walkintheseshoes Posted January 25, 2021 Share Posted January 25, 2021 (edited) On 1/24/2021 at 3:43 AM, Helene Kolpakova said: HOTFIX FIXED THE ISSUE. THANK YOU ? Same issue here, Never had this problem before. Even doing this then trying to save and using a different save folder it still only opens in safe mode. This is also the 1st update that has caused crashes, i have never had a crash since bandlab have taken over CW. 2021.1 update has destroyed CW..... ? HOTFIX FIXED THE ISSUE. THANK YOU ? Edited January 25, 2021 by walkintheseshoes Fix found Link to comment Share on other sites More sharing options...
Promidi Posted January 25, 2021 Share Posted January 25, 2021 5 minutes ago, walkintheseshoes said: Same issue here, Never had this problem before. Even doing this then trying to save and using a different save folder it still only opens in safe mode. This is also the 1st update that has caused crashes, i have never had a crash since bandlab have taken over CW. 2021.1 update has destroyed CW..... ? PLEASE FIX Have you tried the build 86 early release Hotfix? 1 Link to comment Share on other sites More sharing options...
Osman Hemidov Posted January 25, 2021 Share Posted January 25, 2021 12 hours ago, Noel Borthwick said: Привет народ, Спасибо за отличный отзыв. Существует программа установки доступны , в котором рассматриваются наиболее важные вопросы , которые были авторизованы до сих пор. Если вы столкнулись с какой-либо из этих проблем, установите ее и сообщите, решит ли она ваши проблемы. @ Елена Колпакова @ Spectrum424 @Promidi @Andres Medina @Andrey_rbk @ Осман Хемидов @ Гэри Фокс @thegaltieribrothers Now projects are opening. Thank you for efficiency. Link to comment Share on other sites More sharing options...
Andrey_rbk Posted January 25, 2021 Share Posted January 25, 2021 12 hours ago, Noel Borthwick said: Hi folks, Thanks for the great feedback. There is a hotfix installer available that addresses the most important issues that were logged so far. If you were affected by any of those issues please install it and report back if it addresses your problems. @Helene Kolpakova @Spectrum424 @Promidi @Andres Medina @Andrey_rbk @Osman Hemidov @Gary Fox @thegaltieribrothers Thank you! Link to comment Share on other sites More sharing options...
michheld Posted January 25, 2021 Share Posted January 25, 2021 (edited) On 1/23/2021 at 2:13 PM, solarlux said: How to fix this issue with DrumReplacer? @solarluxI made this experience, too. Please don't try to use Drum Replacer as an VST-Insert. It should only be used as an region-effect like Melodyne. You may use the VST-Manager to disable it as a plugin... ? All the best 2 U Edited January 25, 2021 by michheld spell-checked ;-) 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now