Heinz Hupfer

Hi🙂 1. I've tried to find out how to do this. The only say is to use the Keyboard Shortcut,but ig only works if the Focus is on this small arrow. No way to switch through the parameters especially to this parameter. I do change the Pro Channel Parameter without opening the PC modul. I have all parameters on the AZ Display! I can open this with a Button LongPress. Much faster😀 2. I don't think this is in SDK, never seen this. 3. I have not integrated this in my preset yet,but I'm looking into it. Tell you this tomorrow. Send you a s small video from working with PC Modul in my preset tomorrow too and I can help you doing this with your preset! Link to my preset, not yet finished,IM still working on the parameter display... Greetz🙂 Bassman

HI:) For me it's always 3-4 seconds to switch, doesn't matter how large the project is, so I don't use Screensets anymore! Bassman.

HI:) Articulation Maps. 👍👍👍 ARA/Melodyne algorithm picker (pre-release). 👍 VST instruments can use custom instrument definitions. 👍👍 Piano Roll view Note drawing now automatically switches direction as necessary during the gesture 👍 Relative resizing of selected tracks. 👍 Allow track FX bin to be bypassed via control surfaces rather than just individual FX.👍👍 And for sure all the Bug Fixes!!! This is a BIG Release for me. Thank you very much for this😃 Bassman.

HI:) @reginaldStjohn Thanks for the link:) Bassman.

Hi:) A good friend of mine(Drummer) wants to record Drums at home with Cakewalk but he lives a few hundred miles away so I can't really assist... Does anybody know him Videos for Drum Comping/Overdubbing? Thanks:) Bassman

Hi:) I've used articulation maps now. Very intuitive, within minutes I was able to make a new map! Just 2 suggestiones: 1. For Multi Instruments we can duplicate a map, but it should be a faster way to change the midichannel for the articulations! 2. I would like to be able to insert an articulation on selected note(s). Selecting a bunch of notes and then placing the articulationes starting exactly on "From" a d ending exactly on "Thru" would be nice. Should be possible if the articulationes are at least sent 20 ticks before the notes! By the way thank you very much for all the other beautiful new features in this release! Thanks😉 Bassman

Hi:) Thanks for articulation maps, I'm awaiting this for a long time:) Great Job! Bassman.

Hi:) The best free burning software I know! Very safe and stable with lots of features. https://www.burnaware.com/ Bassman

HI:) Perhaps it's this "Reset Controller when playback stop" thing like I had before...... Look at Settings -->Project--> Midi-->More Options-->Reset Controller Disable it just for testing. Bassman

HI:) Greetings;) Bassman.

HI again:) OK! It works:) 1. Make an Instrument File (LaunchControlXL.ins for me) with following Content and save it to ..\Cakewalk Content\Cakewalk Core\Instruments: ============================ .Patch Names .Note Names .Controller Names .Instrument Definitions [LaunchControlXL] NoControllerReset=1 Control=LaunchControlXL Patch[*]=1..8 Key[*,*]=LaunchControlXL ============================ 2. In the preferences-->Midi-->Instruments-->Port/All Channels of the Controller-->Define--> Import (The made .ins File) Now this Controller is not resetted on Settings--> Project-->More Midi-->"Reset Controller when playback stop" enabled. That's so nice, why have I not found it earlier? Great;) Bassman.

HI:) @Nigel Mackay I'm in contact with Alexey, he has had no solution for this problem but blocking all incoming controllers from Cakewalk inside AZController. The problem is then I cannot use buttons as "normal" midi buttons to play drums for example.... Perhaps he did not know this "NoControllerReset=1". I'm trying out some things.....back soon:) Bassman.

HI:) @Nigel Mackay I only use this midi controller with AZController (Midi In/Out). But where to put an Instrument File? There are no Sounds, Note Names or Patches, it's just a Midi Controller with some User Presets. Do I have to insert a few Lines into the Master.ins? Normally you use Instrument definitions in a Midi Track, but I don't use a midi Track for the controller, so I cannot put the Instrument File to....... Bassman.

HI:) @Michael Graetzer It's not that easy. You can "learn" the functions, but you have to repeat that on every startup. In AZController or too in ACT Controller or Generic Interface it is saved or fixed. The most possibilities you have with the AZController Plugin. Don't use this preset here, cause I adapted it from an BCR2000 Preset, so the colors for example are not used and a lot of functions do not work like on the BCR. I've made a complete new preset for the LaunchControl XL: Almost finished, I do "Bug" fixing at the moment and on working with it I do change some functions or delete or add them for smoother working. I'm now on Display to see what's going on when using some Rotor, Slider or Button, but you can always download the latest version of it. Greetz;) Bassman.

HI:) I found following: ============================================ NoControllerReset=n Any port/channel using an instrument definition that has a NoControllerReset flag set to 1 does not receive a "zero controller" message upon stop. You can enter this variable in any instrument definition by using a text editor, such as Windows Notepad. The variable should be entered directly below an instrument definition. For example: [Yamaha Promix 01 Control Chan] NoControllerReset=1 Control=Yamaha Promix 01 Control Chan Patch[*]=Yamaha Pro Mix 01 This parameter should be used when it is undesirable to zero/reset controllers when playback stop, such as when using an external effects processor that uses MIDI controllers for real-time parameter control, or when using a digital mixer as a MIDI control surface (and not using the generic control surface plug-in) ============================================ How can I use this to my attached midi controllers not to RESET when "Reset Controllers on Stop" is enabled? Thanks;) Bassman.

Hi:) If I set Nudge to Note value "1 bar" it works nudging left and right, but if I set it to "Snap settings" and choose 1 bar for snap it don't! "A Whole" does work. Can somebody confirm? Thanks;) Bassman.

Hi🙂 I can play a bassline for you if you give me a playback and the chords. It's a part of my profession to play bass😉 Bassman.

Hi🙂 The most of this 432 Hz article is not true! For example Mozarts Tuneforque had 426 Hz, not 432. Every Composer had a differe t tuning , raising up to 456 Hz for Richard Wagner. Phytagoras tunes his instrument in perfect fifths, which doesn't work well for our ears, cause it produces a small frequency difference with the last fifth to the starting note. There' s nothing known about his tuning! Si I'm pretty sure it wasn't 432 Hz for an A or what he called it..... So forget about this, it doesn't even sound better, just deeper with less overtones. This esoteric discussion is just bullsh.... Bassman

Hi:) I use Total commander to rename files, you can install it for free. Mark the files and press Ctrl+M to use the renamer. Bassman.

Hi🙂 Very strange! Could you try to delete these _ before Caches or give another directory for it on the original place on drive C? Without _ at the beginning!!!! Sometimes Dirs with an underscore at the beginning are seen as hidden and perhaps Cakewalk can't find it correctly....and writes these picture files anywhere else. Which vst are you usi g if you have this behaviour? Bassman.

HI:) Love that groove;) Nice! Bassman.

HI:) @devonaire45 It's definitely no dangerous site! I'm on the forum (with lots of other Cakewalk Users) since 2015 and never had any problems. I visited azslow in Heidelberg this summer and can for sure confirm that he is not "dangerous" 😅 https://community.norton.com/en/forums/dangerous-website-blocked-problem It is obviously blocking non-dangerous websites! @winkpain I can help you writing a preset if you want to use AZController Greetz;) (Underneath my latest preset) Bassman.

HI:) It would be nice to start CAL Scripts in SDK and not have to bind Shortcuts to. For example: In the video I do Selection moving by a Rotor and for every Snap Setting for every step I have to run a CAL Script and as I go down from bar, half, quarter, eighth, 16th, 32nd, 64th, 128th and Snap Off its getting slower and slower. Should be as fast as you can move the Selection with the mouse. You can see the hourglass as it starts the CALs.....must not be like that:) In the second video I move the Selection with the mouse with Snap Off. The Rotor should work with that speed! Bassman.

HI:) Take a look at this: http://www.azslow.com/index.php/topic,458.0.html Bassman.

HI:) Take a look at: www.azslow.com Bassman.