Heinz Hupfer

HI:) Fantastic Theme!!! Thank you very much? Greetz? Bassman.

HI:) @Mark Morgon-Shaw My Preset for this Controller is Universal. I have 9 different Modes integrated,. so with just a Button Press all Rotors , Sliders and Buttons have different actions. You can see the available parameters at the end and start of the video in the AZDisplay. You can see "Normal" Mode before I switch to the "ProChannel 1 Track Mode" and at the end back to Normal Mode. I have an 8 Track ProChannel Mode where you can edit 8 Tracks simoultaneously for Bass/Tone/HiMid and Highs. Very helpful in the Bass Aerea:) Since I'm beloved in the Schepps Omni Channel, I do not often use ProChannel, but I have done almost everything in it.... So it is very flexible and "not for all actions" faster than working with mouse. I'm showing all possibilities in a video, which I'm doing this week.... Greetz;) Bassman.

HI:) @Mark Morgon-Shaw With a Midi Controller and AZController software you can access the PC, just look at the video: (HD Video needs time to convert on youtube) 1. I'm opening Multidock / 2. Open the AZ Display so you can see the values changing / 3. Switching to Pro Channel Mode Now Rotors 1-4 are Frequencies, 9-12 Q Factor, 17-20 Gain of the EQ, the rest you can see with colors, R 5,6,13,14,21,22 are Compressor, R7,15,23 CE and R8,16,24 Tube of the PC. I'm changing all parameters so just look at the tiny EQ and the Display for the values. For changing Hicut/Lowcut, Lowshelf, Hishelf I have to activate a Shift Button. (For any reason the wrong LED is blinking, so I have to take a look into my AZController preset) Greetz;) Bassman. P.S. Multidock is reacting a bit slow sometimes, I normally do not open it. I'm just working with the AZ Display, it's the fastest way to change parameters. Works for sure with all Plugins in ACT Mode too.

Hi:) @Matthew Carr What does "External" mean? (Bluetooth)Midi Connection or from a Tablet or Handy? There are different possibilities. From a Controller you need either a button and a Rotor to choose the bar number or just use a fader to move to a specific bar. Same with Tablet or Handy. "Goto" Command and typing in the bar number.... SPP should also work with syncing Cakewalk.... Bassman.

HI:) From a fast look I can see (and hear) too much at 2,2 - 4,7 kHz. Sounds very harsh! Nothing there from 7 - 20 kHz. Perhaps add some Cymbal Swells and Crashes or a high Synth or an Accoustic guitar. It's a MP3, they are cut at 15 kHz and do not sound good (unless they are at least 240 kBit converted). Always make a Wave or flac. A bit too much round about 330 Hz, at the end a bit too much about 250 Hz. For E-Guitar I mostly do a Hicut (with Resonance) at about 2,5 kHz, for sure not with Accoutic Guitar. Greetz;) Bassman.

HI:) I've made a huge Preset with AZController, so if anyopne needs help with this, just write to me.... Greetz;) Bassman. P.S. Very good videos from Mike?

Hi:) @Panu Pentikäinen Thank you very much for your answer! I used Duckbar for a long time until CbB came out. You are right, a lot of functions are now in CbB, this I see as a confirmation for your hard work:) Thanks for your Tool (in the past) and we'll see what happens in the future! Greetz;) Bassman.

Hi? The link to Duckbar doesn't work anymore on this site. Ask the programer of this tool, if it still work in CbB ! Again good luck? Bassman

HI:) Not possible, but there was an utility called Duckbar which did add Solo and Mute Buttons to the Flyout window, when I remember correctly. Not used this for a long time and I think it will not be refreshed anymore....(Panu was the programer) Here one of the latest post from "panup" i know: http://forum.cakewalk.com/To-The-Amazing-Panu-Any-Chance-of-a-CbB-Duckbar-m3757949.aspx Perhaps you can find it here? http://forum.cakewalk.com/SONAR-amp-Cakewalk-by-BandLab-CbB-Resources-and-Utilities-m3392713.aspx Good Luck;) Bassman.

HI:) I can confirm this! Ctrl+TAB doesn't switch between windows anymore. It only let disappear the Now Time Marker. Bassman.

HI:) Ctrl+TAB is a Windows Shortcut, Alt+TAB switches through opened Programs/Apps and Ctrl+TAB through the TABS of a Program (Browser Tabs f.e.), in CbB the Focus between Multidock and Track View or any other opened windows. It sometimes doesn't switch to the Multidock window, therefore Ctrl+Shift+Left/Tight is needed. Greetz;) Bassman

HI:) WOW, very nice features I've never seen in an EQ! Thanks for this;) Bassman.

HI:) For sure;) Give Feedback and write diverse changes you need... Long time that I made this preset, so..... Greetz;) Bassman. Akai_Midimix_Final.spp

HI:) In some Plugins I can see Directories in the Load Preset Window. How can this be done? With Saving I can't choose to make a Path! Do I have to edit the preset itsself with an editor? Thanks;) Bassman.

Hi:) Here an Instrument File to Import which avoids resetting the Controller after hitting Stop. Just rename "LaunchControlXL" in the filename and in the file itsself to make your own. Greetz;) Bassman. LaunchControlXL.ins

HI:) WOW! So fast! Thank you very much for your work! Trying it out today.... Greetz;) Bassman.

Hi? I'm using your theme since Jan 2020 and I love it! Will it be updated to 2021.4? Thanks;) Bassman.

HI:) @Ronny.G >>>And for change mode it seems that is necessary to send a midi message that contains these values: >>>ATOM MIDI MODE = Note off, channel=15 (or 16?), note=0, velocity=0 >>>ATOM MIDI NATIVE CONTROL MODE = Note off, channel=15 (or 16?), note=0, velocity=127 Where do you have this information from? I could not find anything about "NATIVE" Control Mode or Color changing. Is there some Programers Manual? Mode Change is normaly activated by some Sysx, this can be sent on startup of a CbB Project. If Midi Note Off can be "initialized" by AZController I have to try out, but this can be. I have not continued working on thsi preset, cause I got no feedback what functions to lay on the Buttons/Rotors/Pads, but we could go on working on it.... Can remember to have finished the Transport and some NAV Buttons.... Greetz;) Bassman.

Hi? @scook With AZCONTROLLER you can have both, a controller as midi input and as controller input. You just need 1 button as a switch and you can use pads to record midi or to control the DAW. Bassman

HI:) www.azslow.com I do need the Midi signals that came out of the Nectar and which function you want to have on it! Perhaps these DAW Integration files does help me to see if it is possible to write an working AZController Preset..... So just send me this file and I have a look if I can find the related sent Midicontrollers. Bassman.

Hi? Perhaps AzController would be an option? I could help writing a preset for this keyboard... Possible to take a look into this Sonar DAW Integration File? Greetz? Bassman

HI:) Sometimes Win 10 Updates does mix up the Midi Controller order. Try to deactivate and then reactivate it in the Properties and the Controller IN/Out-puts. I have to do this all the time. As soon I plug my Midi Keyboard in, my controller doesn't work and I have to do the described! Greetz;) Bassman.

HI:) All these commands are used by AZController, so if you write a preset you can use all these commands. www.azslow.com Greetz;) Bassman.

HI:) To clarify some button actions here a short video: (I'm doing videos but it takes time) In the video I do: 1. Press Shift button, switch to Bank 2, change Send 1-3, press Shift and the Rotors change Send 1-3 Pan! See mouse pointer. 2. Press Ctrl button, use Slider 1 to Move from bar 1-127, the slider is at the end, now I press Ctrl Button and the Slider is now endless, the upper half do move forward, the lower half backward. 3. Another Shift and Ctrl is to Double Press (within 0.4 seconds) the Transport/Mode buttons (Record Arm, Solo), faster to reach:) I like this more than the normal Shift and Ctrl. I switch back to Preset 1 Bank 1. 4. Short Press Button 9 (Mute) / 5. Double Press Button 9 opens the Control Bar 6. Long Press button 9 copys the selected clip, Move Data Cursor and press button 11 to Paste, press Ctrl for endless rotor 7. press button 12 for "Undo" 3 times / 8. Press Shift button, Shift + Button 9 selects left clip, button 10 right clip 9. Double Press Button 10 opens Multidock, Shift + Long Press Button 9 gives focus to previous TAB, Button 10 next TAB. 10 Double Press Button closes Multidock So we have 5 different actions on Short Press, Double Press, Long Press, Shift and Shift Long Press on just 1 Button and 1 Mode, this was Normal Mode. I have 10 different Modes, so the in principle the Button has about 50 different functions:) Not really, but it could be! So this is what is possible with AZController! A lot.... Bassman.

HI:) I do gain staging with controller level metering, but.... Down below a short video of the (small) problem: In the video: 1. Entering my Level Mode - press play 2. Controller shows correct level of focused track, you can see this on soloing the track 3. I choose another track, press play and solo it and it shows correct level for gain staging 4. I select a clip and play selection (Shift+Space) and it doesn't show the clip level but the level of the focused track! Now the problem is that I can't focus the "Clip" selected track, but with Track select fader or by clicking in the tracks name with the mouse. So I have to move 2 Faders to show the level of a selected clip. I could move both together, clip selection and the next/previous track action, but as soon an empty track occurs, the track selection is behind the clip selection, not in sync anymore. There should be a possibility to focus the selected track or the track of an selected clip with a shortcut or an SDK function. Other possibility is to read out the number of the track of a selected clip, but I can't find any variable to show this. The same with the Data Cursor. Would be fine to know on which track the DC is "current". Not only for level metering, but would be nice to mute or solo the track of the selected clip. I can go the other way and select the focused track with ",", but this only works if the track view is in focus, if the focus is on the inspector this command doesn't work anymore.... Thanks;) Bassman.