Heinz Hupfer

Hi:) If you use Autohotkey this is the syntax: Send {Click 100 200 Right} ; RightClick But you have to give the coordinates... Bassman.

HI:) Added Last Changes document, cause nearly every time I work in Studio I find some things to add/change for better working with it! This is the greatest Improvement for now: Brought all things together! Now all Modes are available from Preset 1 Bank 1: Normal Mode Bank 1 Long_Press WAI Down: Midi Mode Long_Press WAI: Record Mode Long_Press CTRL: PRV Mode Long_Press SHIFT: 24 Track Mode Long_Press Preset: Reset to Preset 1 Bank 1 Long_Press Bank: Pro Channel 1 Track Mode Long_Press Mode: Level Mode Double Press Ctrl: ACT Mode Synths Long_Press Shift: ACT Mode Plugins So you must not switch through Banks or Presets to switch to any Mode, very faster to work with. I added the 3. different "Endless" Mode for the Rotors and Sliders: Sliders and Rotors are not Endless on Novation Launch control, so I have 3 different Buttons to use these Rotors and Sliders Endless: 1. Ctrl On: The upper/right half of the Rotors/Sliders move up/right, the lower half left/down 2. Long Press Mute 2 Button deselects Actions from the Rotors/Sliders, so you can move them in the other direction when you're on the end, pressing Mute 2 again long and you can go on. 3. Double Press Bank Button switches direction of the Rotors and Sliders. So when you're at the end (up/down) double press Bank Button moves on with revers direction. To the right/up normal, to the left/down with double Press Bank Button, pressing again it goes normal again.... The first method is the fastest! Greetz;) Bassman.

HI:) I don't know exactly what you mean, but: To move notes, select them and press CTRL+X, then move to the new location and press CTRL+V to insert them at the Now Time. To copy notes, select them and press CTRL+C. In the Preferences --> Nudge --> Nudge 1,2,3 you can choose Snap Settings. hen you can move your Notes with NUMPAD 1+3 for example on snap Settings.. I have the same layed on my Midi Controller and move notes by Snap Settings (Off = 10 Ticks) with AZController . In the Video I selected some notes, activated PRV Mode, changed Snap Settings and moved notes with Buttons. (There's also a Rotor to move the notes) What is missing: Move on Bar doesn't work in Cakewalk:( Greetz;) Bassman.

--- don't know how to delete posts....

HI:) @msmcleod I'm helping always with pleasure. It's fun for me to make AZC Presets although I'm not really finished with mine;) (Videos are missing) Bassman.

HI:) You can use http://www.azslow.com It's a bit more complicate but you have a huge variety of possibilities. Take a look at my preset for AZController: Greetz:) Bassman.

HI:) Love it! ? The only thing: The Piano is too low, the 2 lowest notes should be 1 octave higher, I mean another Conversion, would make it more clean in the related frequency area... Just my opinion;) (And more Bass Movements please?) Thank you for this piece of music:) Bassman.

HI:) "K" does only work for Clips or if you select all notes of the clip in PRV. Press F10, you see whether the Delete or the Mute Icon, choose the Mute Icon (twice F10) and you can click on notes to Mute or Unmute them. Greetz;) Bassman.

Hi:) Sorry, this is an Off Topic question! @msmcleod Can you please tell me with which software you do these videos and the text adding? Thank you verymuch;) Bassman

HI:) Thank you very much;) Bassman.

Hi:) Looks pretty good! Thank you very much for this;) Bassman.

HI:) You can click on a single note with the left mouse button to hear it or use the Inline PRV and use Shift+Space to hear the selection but then you hear all 4 notes from your picture. You can temporarily mute the lower ones with Shortcut "K" or the Mute Tool and play the selection. Greetz, Bassman.

Hi:) For sure, just write a PM to me:) Bassman.

Hi? Should not be too comlicated to make a preset for AZController. I need the outcoming Midi Signals, can you look in Mixi OX what midi CCs the Keylab sends on the Buttons, Sliders and Rotors. Then make a list what functions you want to have on them.... Bassman

--- don't know how to delete posts....

@scook Thank you;) I'll start with installing X2, have some (perhaps needed) older projects with V-Vocal in it..... Bassman.

HI:) My last New Install has been 2012 with Windows 8, so I now (in Corona times) decided to make a second Complete New Install (Some Problems with Windows, not Cakewalk and a lot of dust I think) on another disk. Now the question: Do I have to install Sonar first to get all the things which I bought with Sonar? If not, how do I get all this good old stuff installed? I still own the Serials of everything, but then how to register/activate? Or just copy some directories of the existing Installation? Thanks a lot;) Bassman.

Hi? I just downloaded the Wave of your link to import it into CbB for to see it with an analyser. Should be the same what you exported.... Bassman

HI:) In this song there's less 300 Hz and a lot of in the highs at about 4 Khz (A Metal (foot) drum stick I think). At the beginning it's very hollow, just the Outside Mic and played very soft.... For the Wave File: This is what I see for the left and right (stereo file from your first link). Should be about 35 milliseconds or perhaps more. I've not looked exactly.... Perhaps this is a kind of Pseudostereo. Which Drumsynth do you use? Bassman.

HI:) I can confirm some other posts, Bass Drum to loud and for my taste too much at about 300 Hz. Then I can see that the left Channel is about 35 milliseconds after the right Channel. Don't think this is meant to be.... Cymbals are too loud too for my taste, but this should be heard in Context with the other Instruments! Greetz:) Bassman.

Hi:) I've 3 4K monitors 42"" with 150% scaling under the speakers. I find it sharp and good to read! Depends on the used Design... Bassman.

HI:) In the manual I can see that you can assign the midi Control Numbers to the Knobs and buttons. So it should be no problem to write an AZController Preset for this Keyboard.... If you send me the Midi Controls and what you want to have on these Knobs or Buttons I can write one... Greetz;) Bassman.

HI:) @Dean You used the same sound? Then this is strange, it should be the same level! Same Input, same Sound, must be the same Level! Perhaps you have any Plugins in the first recorded track? Try to change your cables, perhaps it's a loose contact...... Hm, it's getting difficult, can you send me the project? I mean the whole Directory of this song with all audio and the project file. Perhaps I can find something else... Changed something in Windows for the Audio Driver? Perhaps a new Win Update which changed something? Look into the Sound Settings of your Soundcard...... Is the Volume lower or just the Wave display lower, GAIN knobs on the tracks on the same level? Faders the same? Prochannel EQ and Compressor deactivated? Change the Clips. Move the first recording to the second track and the second recording to the first track! Hear if there's a difference! Any Sends which add level for the first track? It can be a lot of things:) Bassman.

HI:) @Dean If you have already recorded 1 Audio Track, try to make a new Track and play the same Sound you recorded. Perhaps the second Sound you want to record is extremely silent on the Keyboard... Bassman.

Hi? Installed today and everyting's fine so far. I have to have a closer look tomorrow but what I've seen it's OK! Bassman P.S. For sure made a backup before with Ashampoo Backup Pro. Saved my life a few times.