Heinz Hupfer

HI:) ?? Ok, so obviously criticism not welcome......sorry I wrote something! Bassman.

HI:) Very cool, but i can hear some bad intonations. For example the very first note and at second 8 and much more, they are too low for my ears and I don't mean the bendings, only the holded (with bending or without) notes. IMHO;) Greetz:) Bassman

Hi:) @Noel Borthwick Changed the Energyoptions to High Performance (not visible on first start). (100% MIN and MAX) (You have to manually start "powercfg.cpl") Changed USB Settings not to switch the Hubs off.(Device Manager) Changed "No Sound" in the Win Sound Settings. (Settings/Sound) Now I can Play the Project down to 64 Samples Buffer (2ms) with no crackles. At 48 Samples the first Crackles appear but no Drop Outs! At 32 Samples Dropouts, but 64 Samples with this Project is fantastic, so I have to revise my first post for sure. I'm not mixing with such low buffers but for recording it is fantastic! I can now work with it and I will stay with Win 11! Next point is, that the Drawing of the smooth shape envelope with freehand is now very fast in 4K Resolution (3840x1920). Don't know if it were the bakers or it is Win 11:) ProChannel Drawing of Gain is now faster too. That's very nice. Could be more faster, but much better than in my Win 10, sometimes I have to wait 2 seconds to see the result of using the Controller with ProChannel. Now it's within the second. Testing more Win Settings to improve the audio performance, but for now it's very good. Greetz;) Bassman.

HI:) @Noel Borthwick Sorry, in English I can see "Overall App Performance" and "Engine Load", when I have the mouse over the Performance Modul in the Control Bar. At 1024 Samples Buffer it is in Win 10 11% App Performance and 31% Engine Load MAX, in Win 11 30% App Performance and 50% Engine Load MAX with the same Project. But I have not changed anyhing in Win 11 yet, perhaps it will be better If I switch some knobs in Windows.....there are some post with improvements, I have to do a closer look at it, cause Win 11 is very nice, I like the new features! Bassman. P.S. I rapidly look into the Energyoptions in Win 11. The MIN and MAX Performance Values were on 5% and 70%. I changed both to 100% and now it's much better! Engine Load better than in Win 10 now! App Performance 24% and Engine Load at 25%, so I'm pretty sure, we can find some knobs for Improvements! I'm diving into it the next days......

Hi:) Ok, I tested a current project in Win 10 and Win 11! (Intel i7-9700/3 GHz, 32 GB Ram) Made a complete fresh install with Win 10 a half year ago which I now updated to "DEV" Win 11. My Old Win 10 is on another Disc so I can start it independently! I used Steinberg UR44C for both Windows, this is my HomePC, in Studio I have RME HDSP 24/96 and Audiobox 1818VSL, but no Win11 installed yet and I don't want to at the moment after this test! Let's look at the project first: Drums: Superior Drummer 3 Bass(Synth): Avenger (Don't laugh:) I'm a Bassplayer, but for this song I need a Synth Bass) Piano: Lounge Lizard 4 3 Instances of Session Horns Pro (Kontakt) Swam Sopran Sax TTS-1 22 Instances of Schepps OmniChannel Stereo 8 Tracks Guitar(2 Verse, 2 Intro, 2 Prechorus, 2 Chorus) 22 Miditracks. 2 Reverbs and 1 Delay on Busses used, 2 other Reverbs and 2 Delays on busses not used in this project. (4 Reverbs and 3 Delays as a template) Always playing the Section with the most Instruments playing! My old Win10 (had a few problems with paths and plugins cause I did not use this Win10 for half a year) 1024 Samples Buffer (Percentages are up to, if "11" they vary from 6 to 11, I always mean the MAX Percentage) App: 11 / Engine: 31 512 Samples Buffer App: 12 / Engine: 34 256 Samples Buffer App: 14 / Engine: 45 128 Samples Buffer App: 17 / Engine: 54 64 Samples Buffer App: 24 / Engine: 65 ========================== Windows 11: looks very nice and I want to switch with all of my PCs to it, but not in this Beta Stadium! 1024 Samples Buffer (Percentages are up to, if "30" they vary from 15 to 30, I always mean the MAX Percentage) App: 30 / Engine: 50 512 Samples Buffer App: 30 / Engine: 60 256 Samples Buffer App: 33 / Engine: 82 128 Samples Buffer App: 47 / Engine: >200 and I can hear Crackles, sometimes Dropouts appear! Can't work with 128 Samples! 64 Samples Buffer Not possible to play the project! The difference is blatant! Doesn't look pretty good for Windows 11 in this Release stadium! I hope I can switch back to Win 10...... https://www.giga.de/artikel/windows-11-deinstallieren-zurueck-zu-windows-10/ Greetz;) Bassman.

HI:) Downloaded it but waiting for my weekly Backup on Friday. Testing Win 11 then over the weekend! Uuups, it's installing immediately:( So good luck to me? Greetz;) Bassman. P.S. Installed! Windows works so far. Loaded CbB and started a few projects. No Problems to plkay them, but I have to make more tests over the weekend. No Time anymore for today.......

HI:) Schepps is the best Channel I've ever heard, and the possibilities are insane! I love this Stereo/Mid-Side/Duo Mode Switch. Duo Mode is fantastic Bassman.

Hi:) Bought 2, got 2 more for free! Thank you;) Bassman.

HI:) In PRV and Inline PRV I can move to previous/next Note with "TAB", then I can change Note Length, Velocity, Move Notes +- (Snap) with Keyboard Shortcuts or with Controller. Now when I want to do this with Playing a Loop , the "TAB" Key to select the next/previous Note is not working, I have to stop , press TAB and Play again or use the mouse to select the notes. Would it be possible to let TAB work on Play? Thanks;) Bassman.

HI:) The fastest way is with AZController and a Rotor or a Fader like in this video: I'm moving Next/Previous Section, Next/Previous Marker and Next/Previous Bar, then some other movements....Next/Previous Clip for example or moving the Selection.... Greetz;) Bassman.

HI:) I've had this on my Studio PC "Crackles and Pops every 10-20 seconds" with 2048 buffers. Can't find the problem and then I went down to 1024 buffers and everything was fine again! So I now do recording with 128 and mixing with 1024 buffers. Perhaps the same problem on your machine? Please tell me if you then find out what it is.... Greetz;) Bassman.

Hi? Here a picture from the Manual. Greetz? Bassman

HI:) @Matthew Carr Here two links from AZController site which are interesting for you..... https://www.azslow.com/index.php/topic,288.0.html https://www.azslow.com/index.php/topic,119.0.html Just write if you need more help for this..... Greetz;) Bassman.

Hi;) OBS was like a overloaded program for me until I saw this video course. It's a very great program! It's in German, but perhaps you can see some things and how it works.....I have just looked at the first 6 videos.... Greetz;) Bassman.

Hi? @murat k. Is the track of the opened flyout window then selected or/a d made active to work immediately with a midi controller on it? or Is a shortcut possible so that I can first select the track, then open the flyout window? I do almost everything with controller, not mouse, if possible? Thank you:) Bassman.

HI:) I've made a short video with a small AZController preset: (Attached the preset) Button 1 jumps to Bar 100 Button 2 jumps to Bar 150 Button 3 jumps to Bar 200 Button 4 jumps to Bar 10 It is also possible to set save several Now Times in the timeline and load them with Button Presses but they are gone when you exit the project. So this is the better possibility. You can have as many Now Times as many Buttons you have or add some Ctrl, Shift or Alt Buttons for more NowTimes. Now the problem is how to access the Buttons. Normally via a Midi Command, in this case CC 57,58,59,60. I know it is possible to send these CCs via a Handy(OSC) or a Tablet, but therefore you have to ask Alexey(AZSlow, www.azslow.com) cause I have never used this.... With Midi controller it is very easy as you can see:) P.S. I forgot, you can lay this on a Rotor or Slider, so 127 Positions with just 1 Rotor/Slider, but it's a bit tricky to just move 1 value, so better just 64 Points per Rotor/Slider. You could combine a Rotor and a Button. So Choose the Position with the Rotor and Move to with the Button. Greetz;) Bassman. Jump to Position.spp

Hi? You could make a Autohotkey Shortcut to turn all On or Off what you want with a single Shortcut. (If it is possible with TAB and Space to turn things on) Different Hotkeys for different purposes or just one for always the same. I could make some when I am in Studio tomorrow morning(Germany) Greetz? Bassman.

HI:) I have this problem since a long time, sometimes it goes a bit faster, sometimes not..... In the video I open ACT Mode and use: 1. Schepps Omni EQ Gains with Sliders/ EQ Frequncies with Rotors 2. Open the next Plugin in the Track, use Threshold Sliders and Frequencies with Rotors As you can see it is reacting very fast! 3. I close ACT Mode and open ProChannel As I move the Rotors it does nothing when I move as fast as in the Plugins. After a long time, when I go slower and slower, the curve appears suddenly. Then it jumps... When using the Rotors very slow it reacts as it should! Is there any chance to look into this behaviour? It happens with ProChannel and the Multidock sometimes too....as if there's a buffer overflow and avoids the showing of the changed values.... Thank you very much. Greetz;) Bassman.

Hi:) [Solved] It was a problem with the Shortcut Key. I bound it to another Key and it worked again....so any bug in the shortcut list. The Key is not unbind from an old binding..... I've had Shortcuts and the commands on my controller, but I have realized that "Back to Previous View" don't work anymore. I select a clip or a track and use "isolate and fit selection", it shows in the wohole window size. After editing I use "Back to previous View", but it now only shows in half windows size, not as small as it was before the isolate command. Can somebody confirm? Or is it just me? Thanks;) Bassman.

HI:) Fantastic Theme!!! Thank you very much? Greetz? Bassman.

HI:) @Mark Morgon-Shaw My Preset for this Controller is Universal. I have 9 different Modes integrated,. so with just a Button Press all Rotors , Sliders and Buttons have different actions. You can see the available parameters at the end and start of the video in the AZDisplay. You can see "Normal" Mode before I switch to the "ProChannel 1 Track Mode" and at the end back to Normal Mode. I have an 8 Track ProChannel Mode where you can edit 8 Tracks simoultaneously for Bass/Tone/HiMid and Highs. Very helpful in the Bass Aerea:) Since I'm beloved in the Schepps Omni Channel, I do not often use ProChannel, but I have done almost everything in it.... So it is very flexible and "not for all actions" faster than working with mouse. I'm showing all possibilities in a video, which I'm doing this week.... Greetz;) Bassman.

HI:) @Mark Morgon-Shaw With a Midi Controller and AZController software you can access the PC, just look at the video: (HD Video needs time to convert on youtube) 1. I'm opening Multidock / 2. Open the AZ Display so you can see the values changing / 3. Switching to Pro Channel Mode Now Rotors 1-4 are Frequencies, 9-12 Q Factor, 17-20 Gain of the EQ, the rest you can see with colors, R 5,6,13,14,21,22 are Compressor, R7,15,23 CE and R8,16,24 Tube of the PC. I'm changing all parameters so just look at the tiny EQ and the Display for the values. For changing Hicut/Lowcut, Lowshelf, Hishelf I have to activate a Shift Button. (For any reason the wrong LED is blinking, so I have to take a look into my AZController preset) Greetz;) Bassman. P.S. Multidock is reacting a bit slow sometimes, I normally do not open it. I'm just working with the AZ Display, it's the fastest way to change parameters. Works for sure with all Plugins in ACT Mode too.

Hi:) @Matthew Carr What does "External" mean? (Bluetooth)Midi Connection or from a Tablet or Handy? There are different possibilities. From a Controller you need either a button and a Rotor to choose the bar number or just use a fader to move to a specific bar. Same with Tablet or Handy. "Goto" Command and typing in the bar number.... SPP should also work with syncing Cakewalk.... Bassman.

HI:) From a fast look I can see (and hear) too much at 2,2 - 4,7 kHz. Sounds very harsh! Nothing there from 7 - 20 kHz. Perhaps add some Cymbal Swells and Crashes or a high Synth or an Accoustic guitar. It's a MP3, they are cut at 15 kHz and do not sound good (unless they are at least 240 kBit converted). Always make a Wave or flac. A bit too much round about 330 Hz, at the end a bit too much about 250 Hz. For E-Guitar I mostly do a Hicut (with Resonance) at about 2,5 kHz, for sure not with Accoutic Guitar. Greetz;) Bassman.

HI:) I've made a huge Preset with AZController, so if anyopne needs help with this, just write to me.... Greetz;) Bassman. P.S. Very good videos from Mike?