Heinz Hupfer

HI:) I can confirm some other posts, Bass Drum to loud and for my taste too much at about 300 Hz. Then I can see that the left Channel is about 35 milliseconds after the right Channel. Don't think this is meant to be.... Cymbals are too loud too for my taste, but this should be heard in Context with the other Instruments! Greetz:) Bassman.

Hi:) I've 3 4K monitors 42"" with 150% scaling under the speakers. I find it sharp and good to read! Depends on the used Design... Bassman.

HI:) In the manual I can see that you can assign the midi Control Numbers to the Knobs and buttons. So it should be no problem to write an AZController Preset for this Keyboard.... If you send me the Midi Controls and what you want to have on these Knobs or Buttons I can write one... Greetz;) Bassman.

HI:) @Dean You used the same sound? Then this is strange, it should be the same level! Same Input, same Sound, must be the same Level! Perhaps you have any Plugins in the first recorded track? Try to change your cables, perhaps it's a loose contact...... Hm, it's getting difficult, can you send me the project? I mean the whole Directory of this song with all audio and the project file. Perhaps I can find something else... Changed something in Windows for the Audio Driver? Perhaps a new Win Update which changed something? Look into the Sound Settings of your Soundcard...... Is the Volume lower or just the Wave display lower, GAIN knobs on the tracks on the same level? Faders the same? Prochannel EQ and Compressor deactivated? Change the Clips. Move the first recording to the second track and the second recording to the first track! Hear if there's a difference! Any Sends which add level for the first track? It can be a lot of things:) Bassman.

HI:) @Dean If you have already recorded 1 Audio Track, try to make a new Track and play the same Sound you recorded. Perhaps the second Sound you want to record is extremely silent on the Keyboard... Bassman.

Hi? Installed today and everyting's fine so far. I have to have a closer look tomorrow but what I've seen it's OK! Bassman P.S. For sure made a backup before with Ashampoo Backup Pro. Saved my life a few times.

HI:) @Dean I've looked for your Focusrite. There's a big Gain Knob in the Front, so you just have to raise it up to get more Input Level. Again to clear it up. You pulled the Audio Outputs into the Audio Inputs of the Focusrite? Or do you have just Midi Out striped to Midi In of the 4i4? Perhaps then you have a Softsynth and the problem is very different from what we think:) Then the Midi Velocity of your Keyboard has to be changed.... Bassman.

Hi:) Just to clear it up. You does mean the Input Level! Cause you wrote Meter Setting. If you want to set it to -24 dB for example just right click on the meter level display. For the level adjust the input level of your soundcard. Bassman.

HI:) I've attached 6 Files (based on Scooks CALs) you only have to copy them into ..\Cakewalk content\Cakewalk Core\CAL Scripts and Keybind them. Have a nice day;) Bassman. GoBackward-15-Ticks.cal GoBackward-30-Ticks.cal GoBackward-60-Ticks.cal GoForward-15-Ticks.cal GoForward-30-Ticks.cal GoForward-60-Ticks.cal

Hi? You have to adjust the Input Gain of your Audio Interface for more Input Level! Bassman

HI:) If you have a Midi - Controller, you could do this with a Rotor. You have to install AZController and write a preset and use CAL Programs. http://www.azslow.com/ I made a small video with different "Movings"! Some Movings are with CALs (Hour Glass) and some inside AZController! What I did in the Video: (Just a Test Project for AZController Presets, lot of Clips, Markers, Sections and AZDisplay Open) 1. Moving to Next/Prev Section with Slider 3 2. Moving to Next/Prev Marker with Slider 2 3. Moving to Next/Prev Bar (1-127) with Slider 1 4. Activating CTRL (like on the PC Keyboard) with DoubleClick Mode Button Now I can move Endless in the upper half forward, backward in the lower half 5. Deactivating CTRL with DoubleClick Mode Button 6. Switching to Edit Mode with Mode Button (Light goes On) 7. Moving with Rotor 17 to a Clip 8. Moving Data Cursor to Time Cursor with Solo 2 Button 9. Zoom Horizontal In with Rotor 8 10. Snap Settings to 32nd with Rotor 1, you can see the Control Bar above 11. Selecting a piece with Rotor 10 12. Zooming again with Rotor 8 13. Moving by 60 Ticks with Rotor 3 14. Activating „Do nothing“ with Mute 2 Button LONG_PRESS, cause this are no Endless Rotors and it was the end, so I Press the Button, move the Rotor to the left, press the Button again and it can go on. 15. Moving by 15 Ticks with Rotor 4 16. Moving by 2 Ticks with Rotor 5 17. You can see 2 Cursors, one ist he Now Time Cursor, the other the Data Cursor, they are moving together, but the Data Cursor a bit later. 18. Zoom Out again with Rotor 8 19. Moving Clip Selection with Slider 5 20. Activating SHIFT (like on the PC Keyboard) with Double Click Transport Button 21. Moving Section Selection with Slider 2 (+Shift) 22. Moving „between“ Marker Selection with Slider 1 (+Shift) 23. Deactivating SHIFT with Double Click 24. Moving just Selection with Rotor 21 (You can’t see it cause the Snap is on 32nd) 25. Changing Snap Settings to „Bars“ 26. Moving Current Selection with Rotor 21 Greetz;) Bassman.

HI:) Normally it's Alt + 8 to open the Event List View. If you have selected a Midi/Instrument Track or a Midi Clip and it doesn't open then the Problem is the answer of Scook;) (You have been faster!) or The Event List is opened in the Multidock and the Multidock is closed, then open it by pressing "D" or make it bigger by hitting "Shift + D" Greetz;) Bassman.

HI:) Copy a track, you paste a track. Copy a clip, you paste a clip How would you copy a track? You can make aTrack preset and then load it in the other project, but you can't copy a track, but it's Data. Bassman.

HI:) Open 2 Projects and Drag and Drop the Data from your project into a new one, the Midi/Audio Tracks should be automatically added. Instruments you have to add manually I think but perhaps somebody else knows this better.... (Manual?) Good Luck;) Bassman. P.S. Why not try just 1 Track out and then do the rest if it works!

HI again:) So here I attached a small preset for AZController for the Presonus ATOM for the Transport Buttons. Not easy cause I cannot control the lights, the Play Button(Light) is not working correctly after hitting Record but you will see. 1. Stop After hitting Play the Stop Button is a Pause Button, stops at the Now Time and continues after hitting again. When Recording it does nothing until Record is Off. Hitting Stop 2 Times within 0.5 seconds plays from the Loop Point Hitting Stop 3 Times within 0.5 seconds moves the Now Time Marker to Bar 1 2. Play After hitting Play it plays, hitting again it goes back to the Now Time Marker. When hitting play when Record is on it does nothing! 3. Record After hitting Record it starts recording, hitting again it stops recording, Playback goes on. You can only Stop if it is not Recording, so press first Record to play on without recording then press stop! 4. Click It enables/disables the Click on Playback and Record. 5. Undo With the Shift Button you have Undo (CTRL - Z) 6. Loop With the Shift Button you have Loop On/Off 7. Save With the Shift Button you save the Project 8. Count In There's no command or Shortcut in Cakewalk to switch this, but it would be possible with "Autohotkey" to make a Shortcut. It's either not possible to open the Metronom Settings with a Controller or a Shortcut. I can set the button to open the preferences if you want... Greetz, Bassman. ATOM-12-08-2020.spp

HI:) @Johan You can use AZController to make the knobs do what they should do. http://www.azslow.com/ I can make a small preset for the Transport Buttons, for these and all other knobs I should know what they normally exactly do. I have an ATOM, bought this year and never used it? Don't know why you have Play (Light On) and Play (Light Off) and Stop. The Play knob is enough, if you hit it the first time it plays, on second time it stops, so why a stop Button? Could you please tell how play and record button should work? Stop is clear! Here a link to my preset for the Novation Launch Control to see what is possible with AZController! Greetz;) Bassman.

HI:) @TheCrazyLunatic8 Are you sure? Select all Tracks and all Data or just Press CTRL +A . Then Right Click on any Data and choose Edit --> Copy or press CTRL + Alt + C. If that doesn't work there's really something wrong. If you right click you should be able to copy it, even if it is muted or freezed or archieved! Could it be that you have accidentically mooved the data or renamed any Directory of the data or changed the rights on the Dir? Bassman.

HI:) I've had that too years ago. Make a complete new project and copy the midi data into it and insert the BBC. Perhaps it's the project... Bassman.

Hi:) Wh not copy the clip to the browser if you want to insert it to more than 1 place? Bassman.

Hi:) Open the Automation Lane in the Audiotrack of BBC and rightclick on the automation and delete the automation. CTRL - Z if nothing changed. Bassman.

HI:) A friend of mine from America asks me to do some projects together, but he is working on MAC. I'm sure I've read sometimes that people here do work with it on MAC, but can't find any posts about it. So, is it possible to run CbB in a Virtual Machine? Thanks;) Bassman.

Ok:) Where do you send the tracks to? Which Channels? If it's a synth, can you see an Input Signal fromthe midi tracks? Can you widen the tracks yo we can see the track settings? In the video I can't see any output signal fom the tracks, perhaps no channel or output destination? Are you sure these are midi tracks? Bassman

Hi:) Can you send a picture or better video from this? Difficult to say anything without seeing the tracks and it's settings.... Bassman.

HI:) Thumbs up. ? Bassman.

HI:) Please look here: http://www.azslow.com/ Or especially here: http://www.azslow.com/index.php/topic,119.0.html Greetz;) Bassman.