Heinz Hupfer

Hi:) https://1drv.ms/u/s!Al2mKojzOW0Mp7IcQcOql1qc4hcPNg?e=gqZ3Lx 1. You should "Send to Hardware" the Midimix Preset to Akai Midimix with the Editor (OneDrive Link). I had to change all Buttons to Midichannel 2 and the first Mute Button to CC 25. 2. http://www.azslow.com/index.php?action=downloads;sa=view;down=79 Download and install AZController, latest Version. 3. In Cakewalk open Plugin Manager and Choose --> Controller --> AZController --> Import Import the preset you have downloaded 4. In Cakewalk open AZController Settings in the Control Bar in the Controller TAB 5. Load the imported Preset 6. Open Cakewalk Preferences (P) and choose --> Midi --> Controller 7. Add new Controller --> AZController 8. Choose Midi IN/OUT Port Midimix 9. Open AZController Settings and load and save preset 10. Important to do 6. again and choose other Midi IN/OUT and assume. 11. Important to choose Midi IN/OUT Midimix again and assume. There's a bug at the moment with preset saving and loading That's it. Midimix should work! Problem would be Bank Left/Right cause I can see the same value for Note On and Off. Not sure if this works. On normal press it should move the WAI 8 Tracks forward/backward. On Long Press (~0.5 sec) Bank Right should move WAI to Bus Section and Bank Left to Track Section. So please give Feedback if all works and LEDs do go on and out. Are there some lights on the Rotors? Have not found anything about them.. Greetz;) Bassman. Akai_Midimix - 21-08-2020.spp Akai_Midimix Preset 1 - 21-08-2020.midimix

Hi🙂 These Buttons at the Bottom are the faders I think! Ok! Tomorrow morning I send you a AZ Controller Preset, but you need these Bank Left/Right Buttons, not listed in the picture. Could you try midiox and finf out CC and midi channel? Grüsse😉 Bassman P.S found a editor https://www.akaipro.com/kb/akai-pro-midimix-using-the-midimix-editor/

HI:) Please install MidiOX. Select Midimix as In- and Output. Now press a knob or use a fader and look at the Out/In Windows which Midisignal is coming from Midimix for every Button, Slider and Rotor. I do need: Midichannel CC number or Note Number and Values ( normally 127 and 0) CC Values (from...to) (normally 0 and 127 or to for Rotors) Then I can write a preset for these Buttons, Rotors and Sliders. Another possibility is to write the Preset and you change the Midi values in the Midimix if there is an Editor, I couldn't find any.... Greetz, Bassman.

HI:) After looking to pictures, this should be easy to give you all functions of this controller in AZController. http://www.azslow.com/ I should know which CCs are been sent from it (each knob and fader), then I can write quickly a preset for it... Use MidiOX to see what is coming out of Midimix. Greetz, Bassman.

--- don't know how to delete posts.....

HI:) @azslow3 That works, thank you:) But.... For my new preset is not finished yet, it is faster to just activate it by loading. The Problem is, when I forget to load it and I write new things in it and save it, the new things are messed up with an older version:( (Had to write a few things twice) Insum, this has to be repaired please! I'm pretty sure this is not the last preset I'm writing😉 Thanks for reporting this Alexey! Bassman.

HI:) Important for not to reset Controller when playback stop. In the preferences-->Midi-->Instruments-->Port/All Channels of the Controller-->Define--> Import LaunchControlXL.ins (Download from OneDrive Link) Now this Controller is not resetted on Settings--> Project-->More Midi-->"Reset Controller when playback stop" enabled. http://www.azslow.com/index.php?topic=521.msg3018#msg3018 Always the newest Files: Latest Version 10-05-2021 (Tested all Normal Actions on Track/Bus. Everything works as expected! Tested all Modes, all is fine! https://1drv.ms/u/s!Al2mKojzOW0Mp6cltmQ69wjk2fKl0A?e=HzcDaw I use Userpresets 1-4 from LaunchControl XL MK II (Novation-2.0-LC_Preset 1-4.syx) and Preset „AZC - Nov-2.0-LC 01-27-2021.spp“ for AZControl 0.5r9 (newest release) SHIFT, CTRL, DOUBLE_PRESS and LONG_PRESS Buttons for additional possibilities GainAccess Mode: All "Normal" Parameter, Gain, Pan, Volume, Send 1-6, Send 1-6 Pan, Solo, Mute, Inp. Echo, Phase, Auto.Write, Rec Arm. Normal Mode: Moving to Bars, Markers, Sections, Next/Previous 8/1 Track(s), Zoom (Hor/Ver), Snap Settings on Rotor , Note Length on Rotor, Prev/Next TAB, Loop On/Off. Goto From, Select Active Track, Select None, Exit Cakewalk, Do Nothing (for some Rotors and Sliders), Open Control Bar/Multidock, Fit Project Ver/Hor, Select Clips Left/Right, Move Data Cursor Left/Right, with Shift Up/Down, Select in Timeline (snap), Narrow/Widen Selection, Move Selection, Zoom In on Selection, Audio Selection +- 2 dB(more to come) Record Mode: Same as in Normal Mode plus some Record specific commands and functions. Level Mode: Shows Level of selected Clip or Track on the Buttons (Green, Yellow, Red over -2 dB, Gain, Pan, Volume WAI Track 1-8, Move to Next/Previous Bar/Marker/Section, Select Clip Left/Right/Up/down, Zoom Ver/Hor, goto From/Thru, Select From/To Now Time, Reset WAI to Track 1/57, Loop On/Off, Set Loop to Selection, Show Arranger, Play Selection, Select Clip Left/Right/Up/Down on Buttons, Solo Selected Track, Select None, Selection +- 2 dB, CTRL+Z (Undo), Do nothing, Open Control Bar, Open Multidock, Fit Tracks Vertical, Fit Project, more to come…… Pro Channel 1 Track Mode: All Pro Channel Standard Parameter on Rotors, Sliders and Buttons! (See 1-TrPCMode.docx) Pro Channel 8 Track Mode: All Pro Channel Standard Parameter of 8 Tracks simultaniously, Bank 1 Bass, Bank 2 LoMid Parameter, Bank 3 HiMid Parameter and Bank 4 Hi Parameter for 8 Tracks, for sure not to forget Compressor, Tube and Console Emulation 8 Tracks. ACT Mode (Synth and Plugins): 96 Rotors, 32 Sliders and 64 Buttons for ACT, more with Shift on 4 Banks. 24 Track Mode: 24 Tracks Volume on Rotors, 24 Tracks Pan on Rotors with Shift, 8 Tracks WAI Bus Volume on Sliders and 8 Track Pan on Sliders, Mute and Solo for 8 WAI Buses. Piano Roll View Mode (Inline): Snap Settings on Rotor, Note Length on Rotor, Zoom Hor at Now Time, Zoom Ver at Now Time, Zoom Ver/Hor at Data Cursor, Next/Prev Marker/Bar, Select Left/right, Move Data Cursor Left/Right/Up/down, Open PRV, Length of selected Note(s) +- 10 Ticks (Repeat of Key will come), Nudge Left/Right/Up/Down selected Note(s), Nudge Octave Up/down of selected Note(s), Next/Prev Note select,Note Velocity +- 1/5, Toggle Edit View, Do nothing, Snap to/By….more to come… Extended Keyboard Edit: Snap Settings on Rotor, Note Length on Rotor, Buttons „1“ Scroll/Zoom Mode, „3“ Select Mode, „9“ Edit Mode, Select None, „-„, „+“, „8“ Up, „Alt+8“, „Ctrl+8“, „4“ Left, „6“ Right, „2“ Down, „Alt+4“, „Alt+6“, „Alt+2“, „Ctrl+2“, „Ctrl+4“, „Ctrl+6“, „Ctrl+8“, Enable/disable Extended Edit Mode. Up/Down/Left/right on Rotor 23 and 24 for faster working…. Midi Mode: C1, C#1, D1, E1, F1, F#1, G1,G#1, A1, A#1, B1 and C2 on the Buttons for to record Midi…..(LEDs with different Colors) Have fun and please give feedback;) Bassman

Hi:) The Photo took my son and more than 2 families are aloud to sit together without masks! So why have one at a walk? Bassman.

HI:) I've made a long bycicle tour to my son in Hemsbach and on the way I took a stop to meet AZSlow in Heidelberg. Here a picture from the Philosophers' Walk and the "All Knowing" Guide Alexey at 33°C. It was a pleasure to drink some beer with him and was happy that he didn't find any Vodka😁 (I would have lost the game) Greetings Bassman.

I'm making a new AZController preset and for selecting between markers and select sections it was not possible to do marker selections. Thank you very much;) In the Attachment you can see 1. Moving selection between markers and 2. moving selection of sections With your setting it works as expected! Bassman. NovationNew Preset Test - Cakewalk 2020-07-29 10-49-20.mov

Hi:) Great work!! Just one thing, but I don't know if this is perhaps Version 05 related: Goto next marker is now "Next Marker" OR "Next Section" Wouldn't it be better to keep it clear? Next Marker is Next Marker as it means it and Next Section is Next Section? Don't know how to get to next marker if a section end/start is in between markers.... Not a problem for Shortcut, I just press twice, but Midi Controllers can't see if it is a marker or a section! If I do selections with Controller it is impossible to select the region between 2 markers! Thanks;) Bassman.

HI:) When both controllers have the same CCs, it would be better to have 2 Instances of AZControl and lead the different Midiports to them. You cannot assign the same CCs twice to functions! With 2 Instances and different Ports it should work I think.... http://www.azslow.com/index.php/topic,384.msg2262.html#msg2262 Bassman.

Hi:) Updated yesterday to 2004 and the only thing I had to do is install CbB Version 5.039 again, cause the Runtime Libraries are always overwritten on every Win Update:( But now works very well and I mentioned that projects are loaded even faster than before and the FlyOut Window of the PC EQ is working again on my 4K monitors, haven't used it for months, cause they did'nt show nothing but the background from the Track Window. Very happy with the new Win Release;) Bassman.

HI:) You can set 1 Nanocontrol as Master and the other as Slave in AZControl and set them both in 1 Preset. But you should have different Note Ons or CCs on both NanoControls! If I know the functions you want to use I can write a preset for both. I should know the Midi Signals that both send on every knob... Bassman. P.S. I can see that there is a preset for nanocontrol 2 in AZSlows Website http://www.azslow.com/index.php/topic,283.msg1349.html#msg1349

HI:) https://www.freenet.de/download/downloads/Secwin2-5763.html To Deactivate Hotkeys.(Temporarily) Bassman.

@Starship Krupa I have made a shortcut with Autohotkey for opening EQ Flyout window, this is missing too😁 Bassman

Hi🙂 Cakewalk can only work as Master, not as a slave. But FL Studio as Slave should work with CbB. Bassman.

Hi😊 I forgot opening ProChannel in Console View! Does only work if Console View is in Focus and the right Parameter of the track is in Focus. Ctrl+I for PC in the track view works perfect! Thanks, Bassman.

@msmcleod Good news! Thinking to the end it would be nice to have 2 of them, 1 for opening track related Synth 1 for opening first Plugin from the track FX List (having Plugins in an Instrument/synth track) Thank you😉 Bassman.

HI:) Some problems: You cannot open the synth from the selected track, but that's a Cakewalk problem, no solution for this, as AZSlow said. Focus_Synth_FX.spp 1 Button --> ACT_FX_Button 1 Button --> Next FX (or Synth) 1 Button --> Previous FX (or Synth) Forget the other attached Buttons, I did some other test, which did not work:( First you should assign Midi Buttons (CC, not Note) to these 3 Buttons in the Hardware TAB of AZController. Pressing ACT Button opens synth or FX Plugin of selected track. Pressing again should close the window. Does not if the opened synth is not the first synth from the rack (Perhaps Cakewalk Problem). 1. Selecting Instrument Track and pressing ACT_Button opens the very first synth, you can then switch next and previous synth in the rack by the Next and Previous Buttons. Problem: If you have a FX PlugIn in the instrument track, it opens the PlugIn and you can only switch between FX PlugIns. If you click on a Synth window, then it switches between synths. 2. Selecting a Midi Track which has its output to a synth, it opens the very first synth of the synth rack, then you can switch between synths with the other buttons. 3. Selecting an audio track with related synth on it it opens the synth from the selected track, but not the FX PlugIn. So if you want to open the synth on the selected track, you should use no Instrument track but Midi and Audio track splitted. If you want to open FX Plugin, select an audio track with no synth correlation but Plugins on it. I hope that helps:) Bassman. Focus_Synth_FX.spp

Hi😊 I've done the scripting, but had no time to test it. Complete free day tomorrow, so time enough for testing.... Bassman

Hi:) It's possible with AZCtrl and a midi controller Button. I can send you a small AZCtrl preset tomorrow morning. Bassman.

HI:) Problem is that shortcuts do not work if the focus is not in the right view! Next Problem is that I cannot get the focus to the console view in the multidock by pressing CTRL+TAB. 1. CTRL+I opens ProChannel in TV from everywhere, that should be for all Shortcuts. 2. SHIFT+Enter should open ProChannel in the console view from everywhere, not only when Console View is in Focus. SHIFT + Enter does not work always. Depends from the "parameter focus". 3. Open Bus view in the console should open from everywhere, not only with focus in CV. 4. With Windows CTRL+TAB Focus should "really" change to the Multidock. It looks like it does, the window name changes to black but the focus is still in TV. So I cannot change these things from a midi controller cause it doesn't always work to open PC in CV cause of the lost focus. Thanks;) Bassman.

HI:) @JoseC It's not possible in CAL to read out the momentary snap resolution, but we can set them to every resolution: You can just edit the CAL 3840 - 4/4bar 1920 - a half 960 - quarter 480 - eightth (? 8th) 240 - sixteenth 120 - 32th ... Bassman. MoveSelectionRight_16th.cal MoveSelectionright_8th.cal MoveSelectionRight_quarter.cal MoveSelectionRight_half.cal MoveSelectionLeft_16th.cal MoveSelectionLeft_8th.cal MoveSelectionLeft_quarter.cal MoveSelectionLeft_half.cal MoveSelectionLeft_1_Bar.cal MoveSelectionRight_1_Bar.cal

Hi again:) Oki, here it is: MoveSelectionRight_1_Bar.cal MoveSelectionLeft_1_Bar.cal Both at 960 ticks per quarter note, 4/4 , at less resolution or other metre change the CAL (960 per quarter note)! I put them on ALT+Left and Alt+Right in the Settings/Shortcuts For Autohotkey I took Alt+Shift+Left and Alt+Shift+Right ============================ (Autohotkeyfile.AHK) #IfWinActive, ahk_exe Cakewalk.exe !+Right:: Send, {Alt down}{right}{Alt up} Send, {Shift down}L{Shift up} Return !+Left:: Send, {Alt down}{left}{Alt up} Send, {Shift down}L{Shift up} Return ============================ -->MoveLoop.AHK I like it:) Very fast to move Selection Left or right! Faster than the mouse...... Greetz, Bassman. MoveSelectionLeft_1_Bar.cal MoveSelectionRight_1_Bar.cal MoveLoop.ahk