Promidi

That would affect all notes. Also, moving would achieve an abrupt change. I think the op wants to achieve a smooth glide from one note to another using pitch bend. However, if you do that to an instrument on a single track, all notes bend to the same range (usually 2 semitones up, 2 semitones down) Some instruments (a pedal steel for example) bend just one string of a chord. They also may bend one note, one semitone, and another note, 2 semitones. That's why I suggested inserting the instrument (a koto kaguya in the case of the OP) in both Kontact slots so that each instrument instance can have independent pitch bends.

What are you needed to know. Are you needing to know how to place the same instrument in two Kontact slots so you can adjust the pitch bends of each, independently of each other?

Then it looks like you can just load the same instrument into more than 1 slot. Then simply set the MIDI Channels of each slot accordingly. I don't use Kontakt, but I reckon that's you'd do it. I have the same dilemma with pedal steels so I just use more than one pedal steel track to get independent pitch bends on each string.

This depends entirely on the synth are you using? Which synth are you using? If the synth you're using is not multitimbral (can trigger different sounds on multiple channels), then one way is to use separate instances of the synth for the notes that you need to bend to a different range.

The issues only appear with users who have a very specific configuration. For most people, myself included, this update installed without a problem. If you have waves12 , then there is a file that the WavesLocalServer process hold open, preventing Cakewalk from modifying that file. Either kill the WavesLocalServer process, or reboot prior to install an you'll be fine. This is a bug with waves12 (that waves are looking into) not Cakewalk by Bandlab.

I don't have this unit but is it possible that it’s because they are listed in pairs?

Because of the effort of you and your team, I believe Cakewalk by Bandlab has become THE best DAW to date.... The expediency at which issues get sorted puts a lot of other manufacturers to shame.....

These are preview hotfixes. They are released to address specific issues that the Bakers believe are serious enough to warrant their release. Use the list of fixes in the release notes to help you determine whether to install them or not. If you are not affected by anything listed in the hotfix, then you could hold off until the next pubic release. That being said, I have installed all preview hotfixes to date (I'm now on 2021.1 Build 93) and I have never had an issue with them.

You can actually rename CC controllers globally - but they are just that, global. The idea to have specific CC name mappings per VSTi would be excellent. While Bezier curves for CCs are not possible at this time, the PRV transform tool is probably the closest we have at the moment.

Thanks for this. It makes a huge difference. Any chance the intensity can be adjusted (Either in prefs or registry)

I'm not really sure and I would be guessing at this stage as I do not use this specific equipment. I think what you you might want to do is contact support https://www.enttec.com/support/

You're almost there. Right click on anything there with the words “Hub” , and go to properties > power management. Then deselect “Allow the computer to turn of this device to save power”

It depends what the drivers are for. I don't use Dell hardware so I can only assume that if that page says it it up to date, then you should be all good. As far as the DMXis sometimes losing communication with Cakewalk by BandLab. It's probably more a case of the DMXis losing communication on a hardware level. Check that the USB power management is disabled - this is done in the device manager properties for the USB Root hubs (start+ run devmgmt.msc)

You might want to consider completely uninstalling "TinyWall" altogether. The built in Windows firewall is more than adequate for the task these days.

You might want to get this issue sorted before troubleshooting the issue with the DMXi - they could actually be related.... When you say “downloading latest drivers”, which specific drivers are you having issues with?

You might want to contact Corel support here: https://support.corel.com/hc/en-us/requests/new?ticket_form_id=209638

Has it ever worked, or is this an issue that has just started happening? Are you on the latest version of Cakewalk by Bandlab (Which is 2021.1 Build 75 - though there is also a hotfix to build 86) Is your Windows fully patched and all drivers update to date (Using manufacturer's websites rather than Windows updates) Are you using version 1.70 Win (64bit VST) of the DMXIS App https://www.enttec.com/product/controls/dmx-lighting-control-software/dmxis/ Can you give us some information about your system (version and build number of Windows, Hardware, etc)

Have you tried the build 86 early release Hotfix?

Are you clicking the mouse at the correct location? (Just above the point where you drag to view the Drum Pane)

Are you using ASIO driver mode? What Buffer size, sample rate, bit depth are you using? Are you using any plugins that use look ahead (like a linear phase EQ) Your PC specs would be handy as well See signature for my details (I do not have any latency or sound issues with those settings)

Does anyone else have the issue that if you click the PRV menu item: View | Show\Hide Articulation Pane on an active track in Build 85, that nothing happen? This is on a newly added MIDI track (or SIT) (Works fine in 2021.1 Build 75 - which I have reverted to)

Contact support@cakewalk.com

All fine here 2021.1 Build 75. Pressing keys on my MIDI controller show the key in my PRV (Yes I know 2021.1 build 85 is available, but I am having an issue with articulation maps that makes build 85 a show stopper for me)

With 2021.1 Build 085, I am now unable to display the articulation map pane on a newly created MIDI track (Or SIT) in a new project. Clicking the PRV menu item: View | Show\Hide Articulation Pane has no effect. I can, however, display the articulation map pane from an existing project. But even on an existing project, a newly created MIDI track exhibits the same issue. I reverted to 2021.1 Build 075 and the View | Show\Hide Articulation Pane on a newly created MIDI track is worked again Anyone else experiencing this before I shoot a note to support?

Are you saying that you load a template with that setting unchecked. Then eventually, without loading a new project , the setting is becomes checked? If that is the case, I have never had that issue in the 22 years I have been using Cakewalk (Up to the latest CbB)