Will.

Take lanes: Picture a room with a storage closet quick. The "room" is the main track in this scenario whereby the take lanes are just the storage closet within this "hyperthetical" room of ours, where it stores the extra Takes of the original track. Lets imagine now this storage closet stores flamable liquids - will you be able to light a match (the effect) in there and keep the fire under control to prevent the room from burning too? That's the complications here. Take lanes are basically just the storage closet in the room which is the main track and clip.

It will just be an extra duplicate option to the channel. Wont bring any changes.

This will be destrutive not so? Much like the clip fx bin.

Goes back as far as february. When I reported this.

If it has been moved for a feature request, I'll be the first to start then . . . +1 +1 +1 +1 +1 +1 +1 +1 +1 +1

Finally! God is good, he exist indeed. Every answer you've attempted to give me has been incorrect anyhow. So, I do not see how this will affect me.

You're the best! 👍 Thanks a million. Ah! Great insight knowledge to have and to apply on other areas such as with effect too. There are certain brand name delay and doubler plugins that has a similiar problem, but in a reversed/opposite sense. Normally most delay effect will have a differnce of 0.1sec on their time start from the original source, but then theres the once that start exactly dead on the time (0.0sec) as the source clip. So this is really great ammo to have on these timebase effects - especially in use within a combination of modulators and delay effects on certain short audio sources such as a hat, stick, rimshot, snap, clap etc. Thanks a lot.

@Barth Right click on the faders and "Revert" back to the previous tweak. It is often a great idea to dry your eyes out with the manual.

Yep. Locate the signature key change box in the control panel. It should read as 4/4. By clicking on it, will open a little pop up window where you can adjust any measure to a time signature of your choice. In line with this would be to change your snap setting to triplets or dot notes too for perfect timing.

You really cant read with comprehension can you? You need to recognise keywords and key phrases and stop misinterpret tones within the message. Good for you! Well-done! NOTE: The word "Musical" has a meaning. Knowing this bring knowledge and it helps to keep every tweak one does "Musical" in all its existance - and it is EXTREMELY IMPORTANT!

👇 👆 Cant do better than that statement.

@msmcleod can you perhaps give a little more insight to why the nudge are slightly off by a few .0 milliseconds in its jump? Although it does line up on the next 1/4 note beat (grid line.) it does this with frame and milliseconds too.

Its the default settings. I have never changed this before - ever! Lol. I need to check this, it was something I had recorded myself. But . . . It was doing it with a few different samples too. I made sure to triple check before reporting it. I'll have to grab the laptop quick - i'm in logic right now. Gimme me few seconds quick. EDIT: @msmcleod Time base set to musical and Original time 00:00:00:00 Ahhh! In preference Nudge 1: is on absolute 10 milliseconds Nudge 3: in 2 Frames. Both Absolute time on default settings. Changed 1 to follow Nudge 3 as well. Thought it was the same. Problem Solved.

I'll go check in the main studio quick where I use Logic Pro as well what exactly it is you mean. I do have somewhat of an idea, but that would mean the team will have to redesign a brand new scalable UI. Basically a new DAW to fit every available monitor small, large and wide. I have a 27 inch ultra wide 4K in the studio.

If you can reproduce this - share your thoughts. Record an audio track. This doesnt matter what it is - as long as its audio clips. You can even use a sample (track.) Next: jump to the beginning/start and for visual purpose only - change your snap to a 128th note. Then zoom until you see about 4/5 grid lines. Lastly: Hit number 3 on the numpad to nudge to the right - which it will do, but wont nudge all the way back again when pressing 1. Can anyone reproduce this?

You mean like this? This is with my laptop.

Exactly!

The Question is: Are you aware you didnt do your settings correctly - cause we're pretty sure you did.

Read here: 👇 👆 This implies to the PC gain and pan knob too. Lastly: I dont see how your respond is relevant to this request on things we know of. This is about creating Custom Strips - as in a DEDICATED MASTER STRIP(s) to save with your default template and not whatever you have taken from reading here. What you are discribing (and what we all know,) is something entirely different to this request.

Yeah . . . Just tested this, but . . . ??? I also cant drag and drop a video??? I had to right click and import. Havent even been away for 6 months and im already forgetting things. Didnt it allow drag and drop before - LOL! Didnt it??? Dont know . . .

No, to the hardware bus. That is of no USE basically when you have a Control Surface. That is why mine is always permanetly tucked away | and | not relevent as an example. Yes, to your "Bus A" as an example to this as a"Dedicated Master Bus." You do not want to accidently have your mix bus, or your master bus be panned slightly to one side. That will mess up a perfectly balance, mix as i encountered earlier - before decovering the reason why it was. Yes, most definetly would i want the FX bin still available on these, but if the option is given to remove it too, why not? Personally, I wouldnt remove it. Cause the "Dedicated Master Bus" would be where I do my Mastering and the second one my Mix Bus. I always have 2 Mix bus strips and a Master Bus in the final project, with each having its own reason and use for. Like sometimes I would create a 4th "Mix bus strip" to do my overall parallel compression, if i feel it needs a little more | or | use it as a wet/dry saturation bus on the overall mix to create the perfect artificial analog sound. So this is where you would only want the Mute/Solo and interleave (obviously with the volume slider included) on the entire strip. More Flexibilty. As far as the PC module goes. I cant remember when last I had used it. It too is permanently . . . uhmm . . . disabled? It's removed lol. Appreciate the +1. Example: What I would like to remove on my "Dedicated Master Bus."

What you can try out is go into the preference and under the FILE/Folder location try choosing a dedicated folder from there. NOTE: I have never done this with video before, but i have done it for my Exported Audio Tracks and Track Templates. SO PLEASE! EXPERIMENT! with a demo project before you commit to the new folder location. PLEASE! IF YOU DO NOT TRUST THIS, DONT FOLLOW THROUGH WITH IT. Do these changes at your OWN RISK.

The Track Control Manager and Module Tab in the console is a great tool to custom your strips, but it is not flexible enough. I was looking for a way to remove only the Master Bus MSR buttons and the PC Gain,Pan - including the channel pan knob. Unfortunetly neither Track Control Manager, nor the Console Module Tab allow us to remove these buttons individualy per bus to create a dedicated strip as the "Master Strip." Reason: I had just hooked my laptop to my Nuclear 2 (By the way: it works extremely smooth with The CWalk) Not sure what happened - though it was definitely human error, which panned the PC pan knob 4% Left. This had me going through every channel and strip with an effect Aux and Bus strips wondering why the track is slightly playing more through the left speaker. I have never used the PC Bus Gain nor its Pan EVER, so i didnt think of looking there. Eventually my eye caught this issue and did a reset to "C" (center.) I immediately open the Track Manager only to discover This little incident sparked this request to have these be removed per button and per strip. Example: I would like my "Main Dedicated Master Strip" not to have the PC gain, pan, channel pan, send module and the MSRW buttons on it | but | to only have the Interleave on it with my mix bus only the MS and Interleave. Hope I'm not asking too much and that you see the flexibility and "Security" in this.

Most common culprit would be a rogue automation node that got copied and pasted later in the mix with edits. To isolate this issue, its always best to Ctrl+A and then do a Shift+L which will create your loop markers and tell you exactly where to look for it. Once located and deleted, repeat the above shortcuts before you export. The export window should then give you the accurate time and length of the song.

It is not an actual clip. It only creates, a "guide" to draw your automation on in the lane area if you prefer to draw automation in the Lane. One is the "Automation" lane | and | the other one "Take" lanes. If you delete this clip you delete the actual one. It does not create a duplicate track.