Jump to content

msmcleod

Staff
  • Posts

    6,011
  • Joined

  • Last visited

  • Days Won

    26

Everything posted by msmcleod

  1. Strange - I don't have issues with velocity on mine, although in general I find the hi-hats on most kits mixed too low, but this is a simple hi-hat volume thing not a velocity issue. You can adjust velocity curves on the nitro mesh. Maybe this will solve your issue. IIRC I couldn't find any way to change the output notes on the nitro mesh though. I actually use an Alesis DM5 along side it for extra cymbal pads, as before I bought the nitro mesh I had a DIY kit made out of a Remo practice kit and piezo transducers. On the DM5 everything is configurable, however there's no half hi-hat on that, just open/closed. It's fine for adding a few cymbals though ( note these are fed directly into CbB through another MIDI interface, and don't play the internal sounds on the nitro mesh). For the most part the nitro mesh is mapped to GM. The only exceptions are the half open hi-hat, and the hi-hat splash sound both of which can be tricky to get at first until you get comfortable with the hi-hat pedal. These are output as Note 23 ( half hi-hat ) and Note 21 (splash hi-hat).
  2. I use the nitro mesh with AD2. I did the mapping in AD2 itself.
  3. @Andres Medina - It never occurred to me to leave the recording checkbox unchecked! Good thinking!
  4. @Lonnie Dawkins - we've found the cause of this and fixed it for the main release. The issue is actually at template save time. So once the main release is out, you'll need to re-save your template. The main release should be released some time later this week.
  5. If you've not got a metronome bus, then it'll not sound. Also, the in-built metronome will play all the time through recording - not just at the count-in.
  6. The only way to do this is to record your own click in the first measure, then start recording on measure 2. You can use SI Drum kit to provide the click, using the side stick sound.
  7. You moved the track between track 17 and the track immediately above it, which is currently hidden due to it being in a collapsed folder. There's no way for Cakewalk to guess your intent here - did you mean below track 16, or above track 17 ? Hence the left/right gestures and the indicator.
  8. The drag indicator indicated it was going to move it into a folder. This is because you had moved it to the right hand side. If you had moved it to the left half, it would have appeared directly above Track 17. Keep an eye on the left edge of the indicator - it shows the level at which the track will be placed.
  9. Normally all you need to do is enable the meters in the Mackie Control Surface panel: I normally enable "Select highlights track", and set the Master Fader to bus 1 ( otherwise the master fader ends up only changing the left channel).
  10. @Jeremy Murray-Wakefield - The time line scale is always displayed in musical time. Even though you can display tempo entries as SMTPE time, the tempo entries are actually always stored in musical time. The tempo itself, directly affects SMPTE time - in fact SMPTE times and sample times are actually calculated from the tempo map. As MIDI notes are musical time based, MIDI clips will change size with the timeline as the tempo changes. So a 4 measure MIDI clip remains a 4 measure MIDI clip regardless of tempo. As audio clips are absolute time based, they will change size as the effective time in absolute time changes for each measure. So, as an example if you record an clip that is 4 seconds long. At 120 bpm, this will be shown as a exactly 2 measures long in the timeline. At 60bpm, it will be shown as exactly 1 measure long.
  11. Most probably a VST that hasn't been authorised. Quite a few VST's emit periodic white noise once their trial period has ended.
  12. @Craig Thiem - can you PM me one of your projects that has this issue? Also, can you confirm which version of Cakewalk you're using, and whether it's a bounce or export you're doing.
  13. This is certainly not new to 2021.12. I can get it in SONAR X2, SONAR X3, SONAR Platinum and CbB: 1. Open the PRV 2. Make the main window floating 3. Undock the PRV 4. Lock the PRV View 5. Set PRV to "Disable Floating" 6. Make the PRV full size. Here it is in X2:
  14. No, it's the locked view indicator - see : http://www.cakewalk.com/Documentation?product=Cakewalk&language=3&help=WindowManagement.05.html Locked views are particularly useful for things like the PRV, as it means you can have multiple PRV's open with each one locked to a particular track.
  15. This is because the images are stored on a non-secure server, whereas the rest of the site is being served up from a secure server. Either: 1. Change the start of the website address to http:// instead of https:// or 2. Set your browser to allow mixed content for cakewalk.com
  16. This is a focus rectangle. This was added as part of the accessibility support for the dialog.
  17. Thanks for that - I've got your project file and can repro the issue... now to find out why it happens... [Edit] - this has been fixed. The fix will be available when we release the the main 2021.12 release.
  18. You can assign a keyboard shortcut to CAL scripts within Preferences -> Keyboard Shortcuts
  19. Export presets don't save the file location because they are global presets of the export settings - in other words they store the source type and format settings, but not any project specific information like specific tracks/buses and location. The Export Tasks however, do store all of this information. So the way to do it is to create an export task in each of your album's projects set to your album location.
  20. 1. Select the Clip 2. Process -> Apply Effect -> Reverse
  21. This is my go to method for moving stuff along, especially with larger or more complex projects. Comparitively speaking, from a code point of view, the implementation is very simple and therfore much quicker than moving sections or using ripple edit.
  22. Can you send us a copy of your project? I've tried to reproduce this and can't.
  23. What's your dim solo level set to? The lowest level is -18db, which might be too quiet to hear depending on the project. You can change the level in Preferences- > Audio -> Driver Settings -> Dim Solo Gain:
  24. Yes to both questions. 2021.12 Build 91 and above will try to divide the 5 button image into 8, and end up showing a garbage image.
  25. Keep an eye on the left position of the drag indicator. It indicates the level at which the destination will be:
×
×
  • Create New...