Fabio Posted April 13, 2020 Share Posted April 13, 2020 Bugs I found so far in the inspector view as attached. Link to comment Share on other sites More sharing options...
ZincT Posted April 13, 2020 Share Posted April 13, 2020 Just reporting in on the latest EA version - I worked on an existing project for around 4 hours yesterday doing lots of edits, Melodyne on vocals etc and it was rock solid. Although the project was made before the Arranger was available it would have been much easier using the Arranger. So, to test the functionality of the Arranger and improve my knowledge of it, I'm now making an "Arranger" version of the project. If there are any issues I will report them here. 1 Link to comment Share on other sites More sharing options...
Canopus Posted April 13, 2020 Share Posted April 13, 2020 17 minutes ago, Fabio said: Bugs I found so far in the inspector view as attached. That’s not a bug. You are using a User Theme that hasn’t yet been updated to CbB 2020.04. Switch to Mercury or Tungsten and the image will appear as expected. Link to comment Share on other sites More sharing options...
Fabio Posted April 13, 2020 Share Posted April 13, 2020 10 minutes ago, Canopus said: That’s not a bug. You are using a User Theme that hasn’t yet been updated to CbB 2020.04. Switch to Mercury or Tungsten and the image will appear as expected. You're right. Link to comment Share on other sites More sharing options...
marcL Posted April 13, 2020 Share Posted April 13, 2020 14 hours ago, scook said: I wonder if a separate "marker track" is in CbB's future. This would be great! I tested the Arranger a bit, but I am afraid to change something unexpectedly! Furthermore I have found out that there are some risks, so if you change the order of your song, you still have to manually handle "note overlaps", i.e. notes that start a tiny bit earlier then the section or those that do overlap the section a bit. Okay, you can do this with slip edit and cross-fades for audio tracks, but it is a lot of work if you have some of them. With MIDI tracks it is even worse, because some notes that were meant to be a part of the moved section stay at the old position, when their start is a tiny bit before the section's begin. If you have to set the beginning of the section earlier because of those reasons, then it gets much more complicated, too (and the manual audio clip fixing remains)! Thus for me the Arranger is just a play tool in the early state of a song where all MIDI notes can be quantized and audio perfection is not yet the purpose. I think probably I prefer to use Ripple Edit for a "real" order change of an advanced song. Also I have not yet tested the Arranger with Vst instruments that need some "minus time" for their notes and it also comes to mind guitar/bass Vsti's where you define behaviour that must last over a section. 4 1 Link to comment Share on other sites More sharing options...
GreenLight Posted April 13, 2020 Share Posted April 13, 2020 (edited) 32 minutes ago, marled said: Furthermore I have found out that there are some risks, so if you change the order of your song, you still have to manually handle "note overlaps", i.e. notes that start a tiny bit earlier then the section or those that do overlap the section a bit. I think probably I prefer to use Ripple Edit for a "real" order change of an advanced song. When rearranging with Ripple Edit you have to manually handle overlaps as well... so the Arranger Track should be a quicker way to do more complex restructuring? Although it might be easier to be observant and "catch" all overlap problems if you do it as you go along while Ripple Editing... Nevertheless, as you said it'll be an amazing "play tool", and probably not just in early stages but also in later stages if some alternative ideas happen to come up. There'll be no more: "Imagine that the break here builds up and climaxes to this part over HERE instead... like THIS! *trying frenetically to click at another point in the timeline at the exact right moment, but failing as usual to demonstrate the full extent of the greatness of said idea*" ? Edited April 13, 2020 by GreenLight Added stuff. 2 Link to comment Share on other sites More sharing options...
Jonathan Sasor Posted April 13, 2020 Share Posted April 13, 2020 2 hours ago, Fabio said: Bugs I found so far in the inspector view as attached. This looks like you're using a custom theme. User themes will need to be updated to work with 2020.04. Link to comment Share on other sites More sharing options...
Peter Stiens Posted April 13, 2020 Share Posted April 13, 2020 (edited) hi cakewalk-team, thank you very much. Unfortunately I'm experiencing an error. All worked fine. Then I've tried something with drum maps - I'm learning that feature at the moment - and now cakewalk crashes on creating a new project. I worked my life as a senior software develeloper, so I am willing to contribute with test cases or whatever will help. Please find a dump attached. EDIT: I reinstalled the previous version, started, created an empty project. closed. installes the pre release again. all okay. Best regards Peter Untitled_04132020_131703.dmp Edited April 13, 2020 by Peter Stiens 1 Link to comment Share on other sites More sharing options...
Keith Lane Posted April 13, 2020 Share Posted April 13, 2020 14 hours ago, Noel Borthwick said: @Keith Lane you can save and load multiple arrangements within the same project. If you click the dropdown in the arrangements pane in the inspector you can create as many arrangements as you like. When you select one of them from the arrangements combo box it loads all the sections in that arrangement. Arrangements can duplicate or reference sections that exist in the section pool. Ahhh, ok yes, so I can build a genre template with a of pre existing arrangements, so I can do what I want, though the sections part will get very full ! Link to comment Share on other sites More sharing options...
Noel Borthwick Posted April 13, 2020 Share Posted April 13, 2020 On 4/11/2020 at 11:54 AM, Jean-Philippe ROGER said: Hello, I have a problem with the arrangements. I created 3 sections with only Addictives Drums 2 like Vsti. I organize the sections in one arrangement in ABCB. In playback of the arrangement, the sound of the first section plays well and then cuts off just before the start of the second, playback continues but without sound even in normal playback mode. I have to open the project again to find the sound. Thanks for your help. @Jean-Philippe ROGER I am unable to reproduce this even with the project you sent. i.e not seeing audio stop playing. Can you report back on some of your settings? Audio Driver mode Audio buffer size (latency) MIDI Playback buffer size Playback I/O buffer size (Sync and caching) Also if you start playback normally on the transport from the beginning of the project does it play normally? Link to comment Share on other sites More sharing options...
Noel Borthwick Posted April 13, 2020 Share Posted April 13, 2020 3 hours ago, marled said: This would be great! I tested the Arranger a bit, but I am afraid to change something unexpectedly! Furthermore I have found out that there are some risks, so if you change the order of your song, you still have to manually handle "note overlaps", i.e. notes that start a tiny bit earlier then the section or those that do overlap the section a bit. Okay, you can do this with slip edit and cross-fades for audio tracks, but it is a lot of work if you have some of them. With MIDI tracks it is even worse, because some notes that were meant to be a part of the moved section stay at the old position, when their start is a tiny bit before the section's begin. If you have to set the beginning of the section earlier because of those reasons, then it gets much more complicated, too (and the manual audio clip fixing remains)! Thus for me the Arranger is just a play tool in the early state of a song where all MIDI notes can be quantized and audio perfection is not yet the purpose. I think probably I prefer to use Ripple Edit for a "real" order change of an advanced song. Also I have not yet tested the Arranger with Vst instruments that need some "minus time" for their notes and it also comes to mind guitar/bass Vsti's where you define behaviour that must last over a section. We are working on a solution for overlapped notes across sections. @msmcleod already has something that improves this a lot. 5 1 Link to comment Share on other sites More sharing options...
Peter Stiens Posted April 13, 2020 Share Posted April 13, 2020 Back again, after the lunch break for no reason. Untitled_04132020_152417.dmp Link to comment Share on other sites More sharing options...
marcL Posted April 13, 2020 Share Posted April 13, 2020 3 hours ago, GreenLight said: When rearranging with Ripple Edit you have to manually handle overlaps as well... Yes, but in this case I can open a new space and then work/copy track by track. Like that all is under control and less risk to miss something! ? Link to comment Share on other sites More sharing options...
Jean-Philippe ROGER Posted April 13, 2020 Share Posted April 13, 2020 53 minutes ago, Noel Borthwick said: @Jean-Philippe ROGER I am unable to reproduce this even with the project you sent. i.e not seeing audio stop playing. Can you report back on some of your settings? Audio Driver mode Audio buffer size (latency) MIDI Playback buffer size Playback I/O buffer size (Sync and caching) Also if you start playback normally on the transport from the beginning of the project does it play normally? @Noel Borthwick Audio Driver mode : ASIO (VS-700 R) Audio buffer size : 5,8 msec (256 samples) MIDI Playback buffer size : 200 msec Playback I/O buffer size : 128 (read), 128 (rec) Playback works normally if i don't use arrangement for the read. After to use of the arrangement reader, the normal playback start but without sound Link to comment Share on other sites More sharing options...
Peter Stiens Posted April 13, 2020 Share Posted April 13, 2020 (edited) I reinstalled the previous version but now it crashes, too. This only happens when creating an empty project. I still can open existing projects or create projects other than "empty". Is there an "empty" template? Maybe this is corrupted? Edited April 13, 2020 by Peter Stiens Link to comment Share on other sites More sharing options...
Jean-Philippe ROGER Posted April 13, 2020 Share Posted April 13, 2020 19 minutes ago, Jean-Philippe ROGER said: @Noel Borthwick Audio Driver mode : ASIO (VS-700 R) Audio buffer size : 5,8 msec (256 samples) MIDI Playback buffer size : 200 msec Playback I/O buffer size : 128 (read), 128 (rec) Playback works normally if i don't use arrangement for the read. After to use of the arrangement reader, the normal playback start but without sound I see a negative value in the arrangement reader, maybe this is the problem? Link to comment Share on other sites More sharing options...
winkpain Posted April 13, 2020 Share Posted April 13, 2020 On 4/9/2020 at 2:38 PM, Morten Saether said: Enable/Disable Enhanced Keyboard Editing Mode shortcut is unassigned by default. The default keyboard shortcut (0 on the numeric keypad) to enable/disable Enhanced Keyboard Editing Mode has been removed. To enable/disable Enhanced Keyboard Editing Mode, go to Edit > Preferences > Customization - Keyboard Shortcuts and assign Enhanced Keyboard Editing to an unused keyboard shortcut. Wow! Thank you!! Can't help but feel I played a tiny part in this! 1 1 Link to comment Share on other sites More sharing options...
GreenLight Posted April 13, 2020 Share Posted April 13, 2020 (edited) 45 minutes ago, winkpain said: Wow! Thank you!! Can't help but feel I played a tiny part in this! I just read your thread about it from last month, what a ruckus you had! ? What IS that Enhanced Keyboard Editing Mode anyway? (I read the manual but still don't really get it.) If Cakewalk had had an on/off indicator for that mode, it would have been easier for you to troubleshoot. (In fact, I believe Cakewalk needs more indicators for features that are a bit tucked away: when any track(s) are hidden, when auto preview and looping is enabled in the browser, for example.) Edit: I just checked my own bindings: I've had "Solo all selected tracks" on Num 0 for years myself... Edited April 13, 2020 by GreenLight Added stuff. Link to comment Share on other sites More sharing options...
msmcleod Posted April 13, 2020 Share Posted April 13, 2020 4 minutes ago, GreenLight said: I just read your thread about it from last month, what a ruckus you had! ? What IS that Enhanced Keyboard Editing Mode anyway? (I read the manual but still don't really get it.) If Cakewalk had had an on/off indicator for that mode, it would have been easier for you to troubleshoot. (In fact, I believe Cakewalk needs more indicators for features that are a bit tucked away: when any track(s) are hidden, when auto preview and looping is enabled in the browser, for example.) Edit: I just checked my own bindings: I've had "Solo all selected tracks" on Num 0 for years myself... Essentially, Enhanced Keyboard Editing allows you to edit clips without a mouse. One enabled you get a white cursor on the screen which you can move around using the num-pad arrow keys. Various ctrl/alt/shift modifiers allow you to perform various operations just using the keyboard. In some ways it is an overhang from the Cakewalk for DOS days, but it still has it's uses for people with Mackie MCU's - i.e. you can actually do clip editing just using the MCU. It's also very useful if you're doing a lot of repetitive operations on clips that can't be easily covered by cal scripts - it can save you from constantly jumping back and forth from keyboard to mouse. 1 Link to comment Share on other sites More sharing options...
winkpain Posted April 13, 2020 Share Posted April 13, 2020 3 minutes ago, GreenLight said: (In fact, I believe Cakewalk needs more indicators for features that are a bit tucked away: when any track(s) are hidden, when auto preview and looping is enabled in the browser, for example.) I totally agree with that! Thanks for sharing in my pain! I guess you have time on your hands (don't we all!) to search that out ? The Enhanced Editing feature is for people using a particular hardware controller setup, I believe. Definitely not a majority user function, so very glad it has been taken out of harm's way! 1 Link to comment Share on other sites More sharing options...
Recommended Posts