scook

Make sure to use the 64bit version of EZD. 32bit versions of Toontrack products do not work in 64bit hosts.

@Robert Bone SONAR/CbB install order has been pretty thoroughly discussed in this thread

Or at least open the preference screen and give focus to the Driver Mode (not Driver Model) entry when closing the error message.

If using the same audio device for Windows and CbB make sure both are set to the same sample rate.

It is as I suggested, the error message is telling you the driver mode selected in the DAW has no devices available and it is providing information on where and how to remedy the problem. IOW, when the Focusrite interface (which normally uses ASIO) is not available the DAW shows the message you received because the PC sound chip cannot use ASIO mode except for a very buggy RealTek driver. So the driver mode must be changed to one of the WASAPI, WDM or MME modes in order for the DAW to use the PC sound chip.

Turn off Always Echo Current MIDI Track and assume manual control of input echo then double check all the instrument and MIDI track input assignments. Keep in mind when an instrument or MIDI track has input echo enabled and the input is set to None, CbB changes the input to "All Inputs - Omni" so the track has some input to echo.

use the virtual controller

http://www.cakewalk.com/Documentation?product=Cakewalk&language=3&help=NewFeatures.42.html

does not hurt anything either way delete 5.0.6 if you wish if the delete breaks 5.2.0 just grab another copy from https://www.bandlab.com/products/cakewalk and re-install

Before freeze there was Bounce to Track(s) and Archive Bounce to Track(s) has the ability to select source and target.

TTS-1 supports up to 16 MIDI channels in and 4 stereo outputs per instance.

You have to go back pretty far in the history of the plug-in. AFAIK the presets have been bundled with the DiscoDSP version for some time. I'd like to think so too. IIRC, one or both of the Vox and Farfisa organs from Arturia started out as freeware from Martinic.

Unless something has changed there are hundreds of presets bundled with DiscoDSP 's version of OB-Xd. When I right-click on the plug-in I see 23 banks pf presets. IIRC, most were created before DiscoDSP took over development of the plug-in.

I often use the plug-in UI to init envelopes.

Are we limited to just those choices? If so, chances are I would use the 2nd for plug-ins with a very long parameter list.

My guess is there is more to the message displayed by CbB possibly related to the driver mode the program is configured to use. When possible providing a screen capture of the error message is best. Second best is an "exact" reproduction of the message text.

A complete row of notes may be selected by clicking the keyboard to the left Lassoing notes is another way to select notes in the PRV To bulk change selected notes use the Event Inspector module

This looks like a track where the interface was receiving a signal in one channel and the track in the DAW was set to record two channels. The track input should have been set to record the left channel only. This may be corrected by selecting the track selecting Bounce to Track(s) from the Tracks menu in the track view setting the "Channel Format" to "Split Mono" in the Bounce To Track(s) dialog and click OK then adjust the pan in the left side track and deleting the silent and original tracks. WRT latency, it seems odd the driver has such a difference between input and output latency. The total round trip latency is too high to effectively monitor through the DAW. Usually to effectively monitor through the DAW an interface needs to be set to 128 samples or lower where both input an output latency are similar. At 128 samples the round trip latency @ 48kHz is around 5.4ms.

BA handles all download. I just checked and it appears this has been recently fixed. @Marcello VIOLANTE and @zakoul try again FWIW, I have never found it necessary to run BA or CbB as administrator. There are some old plug-ins that, depending on how they are installed and configured, need elevated privileges but running the DAW as a administrator is rarely necessary.

Try now

@Chaim Pilling @Josh B @bluesagent try now

Thanks Just downloaded and installed 26.05.0.039

Not all manufacturers allow the DAW to change ASIO buffer size. In those cases, the buffer size must be set using the manufacturer supplied utility.