Astraios

Hi and Hello ? Has anyone successfully blocked a range of incoming MIDI Notes from a track? I want to block lower incomming midi notes (of my Control Keyboard) from 1 to 24 and upper incomming notes from 101 to 127. I use these notes in a mackie based Control setup and as I use them for control my synths and FX I don't want to hear a certain sound when pushing my buttons. Something like this: https://isotonikstudios.com/product/note-range-setters/

Didn't realize, there were new updates (Version 3.5) Got a message from Magix Samplitude. They strongly recommened to update Independence Pro. So I updated from 3.2 to 3.5 and after the obligatory fumbling of 3 or 5 hours it finally works fine without jBridge

Yes, while ago I've had bought it as a separate plug-in and now I'm thinking about switch to NI Kontakt (124 Dollars would they charge me for it right now)

Thank you for reply, Scook ? As I mensioned, I have no trouble in stand-alone mode, so I'm not sure it is about registration. What I did is the following. In plug-in manager I've chosen to start Independence with my jBridge-software and : ta-ta! it started just as snipping with my fingers. I find this quiet confusing… ha ha ?

Hi and hello Anybody out there using "Independence Pro" sampler by Magix? It's comparatively a software like "Kontakt" from NI (maybe even better) I've bought it years ago and now can't start it anymore as VST in CbB in my projects since I chanced my mainboard and CPU. In standalone modus no prob at all. It was sucessfully accepted by the CbB VST check and it is listed in the plug-in manager. HoweverI remember, it took half an eternity doing that but it did. Now CbB crashes when I try to load this VST (Independence) I#LL be happy to hear from you. Thx a lot Uwo

Hi and Hello, could need some help... Starting a certain project in recovery-start-modus (choosing: skip all) my actual CbL 2019.03 immediately crashes without any warning. Seems to be a problem with Celemony Melodyne V. 4.2.1.003. Melodyne works fine in standalony-modus. Any suggestions About this behaviour? Cheers Uwe

for me copying lanes only worked out, when I prepare the new pasted template track with the same number of takelanes as in the original track. It is so easy to describe it in german - I hate translate it into something like british ?

* in addition to the first step you discribed: To copy envelopes I had to check the new created preset section inthe synthrack. (it was empty and blank in my setup) Otherwise no envelopes, even no synthassignment in the automation box.

Howdy, and does this method also work when the track carries envelopes and takes? C U ?

Oh, okay - maybe this one could help out; Increase current track height CTRL+SHIFT+DOWN ARROW Decrease current track height CTRL+SHIFT+UP ARROW

Hi, you might find the stuff you need in ''console view'' keybinding-editor: 1062 ? Widen All Strrips 1063 ? Narrow All Strips

Hi, have you also checked the vertical-zoom-bindings in the global-area? Is the assignment made to the same keys there? Another issue could be lenses. Try lenses off... Cheers

Hi and hello, I once had terrible mess with ProChan QuadCurve EQ. Then I realized, Cakewalk doesn't save ProCha EQ adjustments within a projekt. It should be saved under: Cakewalk core/ProChannel presets/ but only if you had saved each EQ Adjustment apart. After this bad experience I save all my EQ s with designated files in ProCha Presets.

My idea (and concept) about a Shortcut-Workpad: (started this a few years ago in Berlin Germany) - 1 keyboard for normal use (mostly text-editing) - 1 modified keyboard (Shortcut-Workpad) dedicated to shortcuts only - 1 programmable mouse, containing at least 5 or 6 buttons, whereat the extra buttons are directed to ctrl, alt, shift... The use of two keyboards in this way, requires a software allowing you to switch between both easily (like e.g. ATNsoft 'keyremapper') The combination of mouse and shortcut-keyboard allows me to avoid the conventional handling of shortcuts, twisting your fingers all over your workpad (as for example "ctrl+alt+U" - what needs two hands for and is defenetly a workflow-killer) This way it's possible to use hundreds of shortcuts with one left finger only and the bottons of your right-hand mouse. For example: - U without mouse - U within combi of mousebuttons (ctrl+U, shift+U, alt+U, alt+shift+U. ctrl+shift+U, ctrl+alt+U) = 7 commands produce with only one button (one left finger) on the shortcut-keyboard and mouse (right hand). I removed some buttons for a better overview and organisation of the workpad, as you can see on the pictures. (there's no need for that many buttons) This helps choosing commands easily and quickly. The colored stickers give me an exact hint to get my intended actions. The right section (NumPad) is for transportation, loop and marker issues. The arrow area is for window regulations like left/rigt - up/down - scaling up/down/left/right - choose one/all track - undo/redo etc. Main or left area is for all kinds of commands. In this area seven buttons are dedicated for controlling the HUD-funktion. It is another great adventure to devide the use of shortcuts and editing text. I found this reduces the rate of accidents by wrongly pressed keyboard- combinations, leaving a horrible mess in your project sometimes. With this solution I'm be able to control my sequencer more laxly, and it gives me room to slow down my right-hand mouse-jerking activities. For achieving a better and harmonical workfow I tent to devide my activities to both hands. ATNsoft KeyRemapper As I pointed out in other mailings, this should give you the powerto regulate about 700 shortcuts, but.. Cakewalk once decided to bind many commands (about 340) in their own 'default keyboard' context. This makes the situation quite complicated. The rudimentaly created keybinding-editor gives everybody a hard time to realize what I try to set up. Shortcut-Workspacemin.pdf

sorry SeaDude ?- I'm tired - it's around midnight and my bed is calling...

take a look here - from the old forum; http://forum.cakewalk.com/Default-Key-bindings-m45528.aspx I hope, I did translate right...

? Hey SeaDude - you're genius!!! Great job done, wow ?‍? And do you know what? - I've found out 2004 or so, a list of all keybindings existed in a cakewalk help file

In ATC tool (options) you'll find the only total summery of all keybindings inside of CbB. It is a complete list not devided in groups or Areas. All in one, but also not editable (no copy) At the beginnning the list also contains some commands refering to ATC only How would you describe the difference between shortcuts and keybindings? There's a keybinding, but not a shortcut editor. Cakewalk offers a list of all shortcuts, but this isn't syncro to the keybindings...

So you say I'm just a grumbler nerving other people. ? No I'm not! Don't you see my creativity thinking about a tool, that could be so much better by changing a few parameters? For example, I'd counted all 340 default keybindings in keybinding Editor ☠️. Was checking out for weeks and months what the hack went so terribly wrong with that section. Rack my brain to find solotions ? Sitting for hours trying to describe in a foreign language my discomfort and you recommend me to light a candle by listening foreigners 'I wanna know what love is' to calm down with "Thank god a millionaire saved the live of Cakewalk" in my mind? ? Maybe you are the one who lost some respect

trigger stop and go with your spacebar (I guess you use and many others too) is such a Operation, isn't it?

.. but Ableton (for one exemple) has another point of view… and that is maybe the smell of success. But anyway, thx for your responding ☺️

Just for you to know, John. This OP you're talking about is operating cakewalk or sonar since the days the files were saved as .wrk s... ☺️

This is exactly the way of argumentation sonar drove the last 10 years and is now for 'free'.

And why? What's the sence in offering such a funktion, if I shoundn't use it? Why not to find your statement in the manual or help?