Herbert Zio

13 minutes ago, Lord Tim said:

It's likely Jon's inbox is full - we only get a certain amount of message space on here, and I'd imagine he'd be getting hammered with messages. Hang tight.

So you still crashed to the desktop even with the Exception severity set to 7? There might be some clues in Windows Event Viewer too in the Application section.

My money is still on a missing or overwritten system library that's causing the issue, but that's still weird on a fresh install.

Yes, even with the Exception severity set to 7!

I reinstalled the Plug-Ins again, and tried again to open the project, notice that the Plug-Ins loading occurs, however, when the project is going to open, it is suddenly closed.

In that three days, I formatted my computer 7 times, tried everything, reinstalled  all redistributable, and nothing working.  And it's not just a project, all the saved projects aren't opening.

But if I create a new project and save it, it will open normally. Which leads me to understand that it's a problem with the new Build's full installer, which isn't recognizing projects saved in previous versions.

And as I mentioned, because most users have upgraded to the new Build and not installed the  full new Build, they haven't noticed this problem, since the base is still the build previous.

I tried several ways to solve this problem and nothing was done, I was instructed to send a copy of my project for analysis, but I'm awaiting guidance for submission the person I would have to send the project from is not accepting messages.

I tried all these options, I even formatted my computer again and didn't install any plugin, in case it was a plugin problem, when not installing any, when trying to open the project it would open the missing plugins window. But the project just doesn't open!

Users who just upgraded to the new Build are not having problems, however, when doing a clean install using the full installer the problem will appear.

It is some error with the reading of the save files from the previous version.

When updating, only parts of the software are replaced, even the installer of the updates are smaller, as they use the version already installed as a base. When installing the full version as I did after formatting the computer, the problem will appear with the full installer, like the incompatibility with the file saved in a previous version.

3 hours ago, msmcleod said:

Either:
1.  Put it in a shared location (e.g. DropBox,  Google Drive etc) and send Jon the link; or
2. Go to "Messages" at the top right of this page, and compose a new personal message to @Jonathan Sasor adding your project as an attachment.

Cannot message @Jonathan Sasor, is there any other way or person for me to be sending?

4 hours ago, msmcleod said:

@Herbert Miron - can you send a copy of of your project to @Jonathan Sasor ?   We'll take a closer look as to what is going on here.

Yes I can, for me to be sending is in "Compose New"? I'm new here at the Forum, I don't know these features.

4 minutes ago, Milton Sica said:

There could be several things happening for the crash.
Try changing the value of the crash handling variable.

 

You can also try opening the project in safe mode. It will identify if there is any problem in any plugin.

I've already tried these methods, I even formatted the computer and didn't install any plugins, nor did the missing plugins window appear. The DAW closes like the video I sent.

I installed version 2021.11 (Build 018), and my projects don't want to open. I've tried everything, formatted my computer several times, stopped installing plugins, among other attempts, and they won't open.Here is the link to a question I asked, there I left a report of all the attempts I made  following the instructions of other users, and nothing resolved.

https://discuss.cakewalk.com/index.php?/topic/36933-cakewalk-wont-open-my-projects/

The plugins are loaded, however when it appears it will open the DAW it closes.

Yesterday it was working normally, but version 2021.09 (Build 145). The version 2021.11 (018) that don't work.

Watch the video below if possible.

4 hours ago, scook said:

If the problem persists after running the 2021.09 rollback installer, then the issue has nothing to do with the 2021.11 update.

There may be a problem with the MS runtime libraries. See

 

I followed all the recommendations, and nothing resolved. I uninstalled the plugins, no opening the projects, I installed them again and nothing. The plugins are loaded normally, but when the message appears... "Preparing the project", the DAW closes, which shows that this is not a problem with the plugins, but with the project initialization by the DAW, during the moment of the project preparation after the plugins loading.
I had formatted my computer a month ago using the Win10 ISO, installed the same plugins I usually use, but the Cakewalk version installed was 2021.09 (Build 145), and everything was working fine until yesterday, so I decided to format my computer again using the same ISO, all the procedures I usually do, however, the version I installed through Bandlab Assistant is version 2021.11 (Build 018), if I followed all the usual steps, the problem is the installer of the new version. I haven't updated Cakewalk, but I installed it using the full installer.
If it was a problem with some plugin, when I tried to open the project without any plugin installed, the window would appear indicating the missing plugins, but even that doesn't happen, the DAW simply closes during the project preparation.

15 minutes ago, scook said:

This is easy to test.

Roll back to the previous version.

In every new release announcement is an installer to revert to the previous release. See

for the 2021.09 rollback installer.

It didn't work for me, if I had updated maybe it would work, however, as I formatted my computer I downloaded the new Build, so the rollback to version 2021.09 is starting already gives new build, the problem is not being removed with rollback. I need to find the full installer for version 2021.09. 

Where can I find the full installer for version 2021.09 (Build 145), is there any repository?

5 minutes ago, scook said:

This is easy to test.

Roll back to the previous version.

In every new release announcement is an installer to revert to the previous release. See

for the 2021.09 rollback installer.

Thanks scook, was looking for some rollback installer, i will test here. 🙂

48 minutes ago, John Vere said:

First troubleshooting 101.

Test that Cakewalk is working by opening. 

Load a template project activate the metronome on playback and hit the space bar. You should hear audio. So nothing wrong with Cakewalk. 

Now close this template and open your project from the start screen or the file menu. 

If Cakewalk crashes its 99% probably a plug in causing this. 

Open Cakewalk in safe mode and find the garbage plug in. 

You issue is probably one of your plug ins isn’t installed properly 

I did this process, the model track works, however, when I open some of my projects Cakewalk closes. I've already tried to open it in safe mode and it's not possible to identify if there is any bad plugin. I formatted my computer again, and I didn't install any plugins, so when loading the project it would open the "Missing Plug-Ins" screen, and nothing happens, the project loads and simply closes.

It's a bug in this new version of Cakewalk, my projects were opening normally in the previous version, and I always backed up my projects on more than one drive so as not to risk losing or corrupting them.

Hi guys!

I formatted my computer, installed the plugins the way I always did, and then reinstalled Cakewalk again, version 2021.11 (Build 018), but my projects don't want to open anymore, I click to open my projects, they load, it appears the message is loaded, but the program simply closes.
I formatted my computer twice again, reinstalled cakewalk again, but without installing any plugins and my projects don't open.

Any solution to my problem?

Hey guys!

How do I make Scrub Tool play longer than 3 seconds?

I scrub the track I want to hear, it just stops playing before it reaches the mouse arrow.

As I recall, this didn't happen in past versions, is there any hidden settings to fix this?

Hey guys, 

Could someone tell me if it's possible to record the audio by processing the plugin's effect on the input?

Hey guys, 

Could someone tell me if it's possible to record the audio by processing the plugin's effect on the input?

I am very happy with the improvements and features made available on Cakewalk, congratulations to the whole team! 👏👏

2 hours ago, Morten Saether said:

O atalho padrão é ALT + T.

ALT + SHIFT + 5 mostra / oculta a trilha Tempo e o inspetor Tempo.

Thanks for informing! 🙂

5 hours ago, Mark Morgon-Shaw said:

Bravissimo !

Now we just need them to make do it for the official version

Actually what would also be cool if any of the bakers are reading is if you could right click to show/hide tempo track 

I defined a shortcut key to show/hide the tempo track, but something official would be better so that all users have the same facility.

14 hours ago, Mark Morgon-Shaw said:

Os ícones não correspondem !!! ... Por favor, cure para o meu TOC   😀

(Excelente atualização BTW ... incrível) 

 

My TOC solved it through the Theme Editor. 🙂

2 hours ago, User 905133 said:

@Herbert Zio  Algo como isso seria útil? 

PS: Esta questão não é realmente um Feedback 2021.04. Se houver discussão adicional, sugiro usar um tópico diferente, talvez em  P&R ou no Sub-fórum de temas de interface do usuário .

 

For me, it's feedback about 2021.04. After all, the Tempo Inpector function corresponds to 2021.04, and the background color of Tempo Inspector does not correspond to the rest of the DAW and is not harmonious.

It is better to fix the problem before the official release, than to accumulate unresolved bugs like the other colors I mentioned, whether from the bus pane or from others inspectors or browser.

20 minutes ago, Colin Nicholls said:

Isso é um Bug FIX para mim

Is this a bug fix? 🤔

As I mentioned in the other topic, this is a bug for me when comparing with Sonar Platinum. And when you open the Bus Pane and lift it to the top, when you collect it by the button, that separation disappears on Cakewalk.

Sonar Platinum

Cakewalk By Bandlab 

Is there a way to change the background color of the bus pane, as well as the inspectors and browser through the theme editor?

7 minutes ago, Colin Nicholls said:

Works fine for me. What Sub-palette are you referring to? The "Other..." Windows color picker? Something else?

Yes, even if you change the color in the theme editor for the new tracks, they appear without the outline.

Waveform outlines do not work on all colors, if I choose another color that is not in the first color palette, but in the subpalette, the outline disappears 

Waveform outlines do not work on all colors, if I choose another color that is not in the first color palette, but in the subpalette, the outline disappears.