Will.

What @marled said. I've created about 4 folder stems so far with the new 2020.11 update - with ease. Only thing I wish was available with Exports in CbB, is " Album Cover TAGS" on export and a "Shortcut Keyboard" for Exporting. (Wait - let me do a quick run through the keyboard shortcut TAB in preferences. A shortcut might be possible already.)

There's few way's to do this - Depending on the reason for in question. 1 - Midi Files: Place Snap setting to Whole Note (easier if just starting out,) right click on the Midi File, Select Bounce to Clip and drag midi out. Right click on the file again and scroll up to Groove Clip Looping. Now drag out until you're happy with the loop you've created. 2 - Audio Takes/Files/Samples: Same principle applies. 3 - Playback Loop: Highlight the freshly recorded takes and press "Ctrl+L" You then can record your creation with Patch Points or direct routing methods to an Aux track. https://www.cakewalk.com/Documentation?product=SONAR&language=3&help=Menus1.048.html

I think you need to go read again. 😕 Seriously go read again. Focus on what is said. FWIW - AGAIN! I'm showing what routing flexibilty there is in CbB. Don't know what you don't understand from that.

What's this? CbB has a vast flexible routing feature build in to it.

I was really not defensive in anyway. It's all just straight conversion. There are workarounds in CbB to get your outboard gear solo'd, if for some reason you can't do it directly in your setup. I guess - I will never understand why people catch feelings when their own medicine are applied. ✌

Well . . . Works for me. I have no problem in this department. FWIW: It is possible to route your Master Track to and Aux (which then becomes your Master Track) to apply these steps, (Think out side the box, not too much furthet than your nose,) but I guess it's too much for you to try, right? Why came to ask this Question then?

Not if you send your faders pre. This works best on Instrument tracks. Create an "Audio Track" next to the Instrument Track and route the "Audio Tracks" Input to that of the Instrument Tracks. I prefer "Audio Track"for this and Not Aux or Bus for this OR use Patch Points.

I own the: • WA76 from Warm Audio • The Seventeen from Black Lion Audio • Electronics M-One XL Reverb (Cheap but really good.) • TL Audio Tube EQ • Dbx 266XS Dual Compressor/Gate • Electronic HD Mastering Brickwall Dedicated Hardware Limiter. Which I have no problem solo'ing. Have you made any changes in your preferences lately? What is that you can't solo? Track buses? What happens when you do solo a track in cakewalk? There's feature in Cakewalk I hate with absolute - that's the the "Solo Dim" It allows bleeding of the effects to come through from your buses. Link on explanation. https://www.cakewalk.com/Documentation?product=SONAR X3&language=3&help=Playback.15.html Also check: https://www.cakewalk.com/Documentation?product=Cakewalk&language=4&help=Playback.17.html

Hi Team/Bakers and the CbB community. Some ideas on existing features. 1: The ability to Hide/Show the "Recent Plug-in view." It takes up unnecessary space. 2: The ability to Show/Hide the "Multi-Dock" 3: Ability for the Renaming of both clips and tracks to follow each other with a "Keyboard Shortcuts" instead of going up to the track tab every time. 4: "Mono/Stereo Meters" to follow interleave. 5: Ability to insert "Mono Audio Tracks" too - for recording. 6: "Flat List" feature for the "Plugin List Category" to not have to click to get to a favorite plugin - when list is out of memory. 7: Ability to switch between "Automation Lines and Bar Envelopes" in the PRV. 8: Ability to switch between full "Channel Colors" and the previous cakewalk "Console Strip Color Scheme with a shortcut key or from the strips themselves. 9: "Smooth Edges" in track view for a more sleeker look and the removal of access space between windows in both Track and Console View. 10: "Improved Tags" feature on export for adding "Single Track Covers and Album Covers."

+100 this. That's why I disable the prochannel. I dont need that on my strips, but it leaves me without the clip indicator and ability to switch the channel on and off. It also looks hack of a lot unattractive too.

Right back at you. Don't be one first if you can't handle the counter reply. Secondy: It is exctly what a pitch envelops is whether build into the daw or not. Lastly: It is exactly what he said.

No success my side with this feature or I'm missing something. I'm clicking on every blank space there is in CbB on a fresh empty template - with only a midi and instrument track inserts. Not a problem too. Cause I always click on an empty space to disable any region/clips and tracks that might be highlighted - this is especially important with doing fine comping and edits. So I'm kinda relieved. Cause the thought of have the PRV popping up every double click I do to ensure i'm not focused in on any material - had me worried for a while. Sjoe! Sigh of relief. 😧

Great work guys. 💪 With every update we get, I feel like a 5 year old again -receiving that first bike. #Excited! Thank You. 😭

I second this.

You can also group all your Drum Aux Tracks and send them to another Aux/Bus Tracks Named "Drums" and work them all as one track from there. Or I send all my 808's including Kicks, Claps, Snares, Toms Percussion, all to one Aux. Should there be a need for further cuts or boosts - you can always go back to the individual tracks and do it there . This saves a lot more CPU and Ram usage and less strain on the over performance as you'll be using less Plugins. Ps: I do understand all our workflow are different, but a separate trial and error test, to see how this could be implemented in your workflow and improvement will work - wont hurt to try. ✌

Got you! Yeah it doesn't allow that (Well, I haven't bother to check for this yet.) Reason: I'm so used to "Ghost Information." What it allow us to do though, is the ability to edited the separate tracks by viewing the ghost information from the other copy in the previous track - if you're doing chorus or lip edits. Pretty much the same as how the PRV does it, and allow us to work with this.😊

If I understand you correctly - yes, it works right. Here's the thing. Not only do you open melodyne, but you also placing it directly on the clip (As how it's being used standard in CbB.) This means that, what ever edits you do, will be permanent after you render the region - "It's the exact same concept of adding a plugin directly on a clip." This means: When ever you close melodyne without rendering it to the region - you have to open the editor by going to the end of the clip, click on that little RegionFX Box and choose "Open Editor" if it's not docked in the multidock. It not a bug, it's been working that way since it was added to the Cakewalk product in Sonar Platinum. For this to work (be sync'd with the track view,) the region you wish to work on needs to be looped in track view - assuming you're not familiar with it (Which I apologize for.) You have to highlight the region in the clip you wish to work on, then: press Ctrl+L on the keyboard to loop the area and to point Melodyne in the direction of the cursors/markers and Now time - with that of the Track View.

You need to make sure that the tempo of the samples you import, are of the same BPM with that on the DAW and each other.

.

There's seems to be a bug with inserting Mono Instrument tracks. When trying to insert two of the same instruments. The output of Track 1 and 2 of the inserts are linked and not split - As seen in the picture. It also sometimes creates 2 inserts and a midi track. Stereo outputs works fine. I hardly never use two of the same mono inserts, so it's been a while and I'm pretty sure this used to work before. Instrument Track Per Output and "Split Instrument Tracks" can't be selected at the same time. Could that be the cause?

Seriously? ARE YOU REALLY GONNA TELL ME THAT'S HOW THAT WORKS WHEN IT'S CLEARLY PITCHBEND. Wow!!! Don't know what DAW you're using - all I know is, im using cakewalk.

What you need to remember is, if your samples are not the same BPM - it will definitely be a monster quest for anyone that is starting out -- irrespective of which you're using. You will have to stretch; cut them; nudge them and often, you'll have to stretch most of those split clips to be sync'd with the tempo and your "Beats Per Minute"(BPM.) Best that you watch some video's on how BPM work with samples. Once you understand that concept - it will be like breathing.

This Ariticulations feature won't be fixed overnight. This is gonna take some time to master and get it to work as it should. We shouldn't rush it. I think it's gonna take at least 3 more months for it to be in focus with the DAW. #MuchRespect to the team working hard on this - it's a true headache for sure. 😂

I hear your point and frustration. It happens sometimes. I've had it happen to me with too. You have to think "Workstations" with this issue. Your custom workstation and your custom template settings work as team. So every changes you make to your windows; screens and preferences settings, save your workstations to your tenplate from anywhere in a project - you don't have to do this on an empty template. So, the next time you update, Cakewalk wont revert you back to the default template settings and workstations.

Always a good idea to create your own personal custom Templates and save them on an external device.