David Baay

Make sure the lower left button in the Select module (must be sized large to see them) to 'Select Events with Sections' is enabled.

Try disengaging that button and recording something even though you can't monitor it and see if you still get click in the recording. Also verify that you actually see the click transients in the recorded clip waveform; if not, that's not where it's coming from on playback. Also, If you're using the "Optional ASIO4ALL" driver, try switching the driver mode in CbB to WASAPI or even WDM. If either of those works, you should just uninstall ASIO4ALL; it's just a wrapper for WDM and can be problematic.

https://7132afa424c2f1a2ab6d-54d68a14e2e7c1f76563a2d8c3e9fd82.ssl.cf2.rackcdn.com/954/documents/MultiMix 4 USB FX - User Guide - v1.6.pdf I don't see anything offhand that could be causing this issue, except possibly this: 15. EXT/USB to Main: Engage this switch to route the audio from the "Ext In" input and USB audio from the computer to the mixer's Main Outs and Phones Out. Do you have anything plugged in to the EXT input?

I notice the clip appears to have been slip-edited or otherwise non-destructively edited already. This shouldn't be a problem, but you might try Bounce to Clip(s) before applying gain. Incidentally, if that's a bounce/freeze of the MIDI above it as it appears to be, I would suggest just using MIDI Volume or audio Gain on the synth track to get the "live" audio level up where you want it.

How are your recording and monitoring (e.g. microphone and headphones)? And how loud is the metronome in the recorded signal? If it's faint, it may well be due to poor isolation of analog circuits. inside the interface. Or it could be getting picked up by a mic from acoustic "bleed" in the room. But if it's loud, it's likely the setup of the interface is routing output to the input internally. Check the manual for a "What U Hear" or "Stereo Mix" input option for recording output from the PC. You don't want that; the input source needs to be Line/Mic In.

But quite uncommon. One way or another, something is likely not configured conventionally on your system, whether it's the project, the O/S or audio interface. Is other audio/synth playback working? I'm curious about this. Both of my PCs have versions of Cakewalk going back to Sonar 8.0 and foward to the new SONAR, and neither of them have a one-word GroovePlayer folder. Does it have the same contents as the "Groove Player" folder? You might search the registry for the one-word path and see if something is mis-referenced.

Check that samples are in place at: %AppData%\Cakewalk\Sonar\Metronome If not, you can copy them from the Cakewalk Core\Metronome (CbB's) folder. You can also try re-registering the dll from an Admin command prompt with: regsvr32 C:\Program Files\Cakewalk\Shared DXi\Groove Player\GroovePlayer.dll

Given how many users are not experiencing such a problem, even if the problem is specific to this release, there must also be some project/setup-specific factor involved, in which case nothing will get 'fixed' if you don't share the project in question with the Bakers or otherwise provide steps to reproduce it.

What instrument? Some note inadvertently interpreted as key-switched articulation?

1. No, there is no "Exclusive Arming" option like Exclusive Solo. You have to manage arming manually. But for MIDI/Instrument tracks there is an "Allow MIDI Recording without an Armed Track" option in Preferences > MIDI > Playback and Recording feature that will record the currently active/focused track. 2. If a plugin induces delay, there is no way to eliminate that on the track that's using the plugin. You can override plugin delay compensation being applied to other input-monitored tracks by enabling the PDC [override] button in the Mix module of the control bar, but this works only if the plugin isn't directly on that track or on a bus in its path to the output. Some delay-inducing plugins have a "draft" or "low-precision" mode that can be used to reduce the delay for real-time use at the cost of some audio quality. I don't know if this is possible with the one in question. 3. So far as I know, Bandlab is primarily conducting support by e-mail. You and they can leverage Google translate for that. In some cases, they might initiate a phone call or web session to assist further, but I doubt they are able to accomodate many languages other than English, if any.

Not sure what you're saying here. The Browse button in Sonar is the equivalent of Existing Projects in CbB. Both always default to the top level of your Projects folder, but the new Browse button added the ability to add alternate starting paths. And the Recent tab doesn't open an Explorer window.

I don't really see sluggishness in the Start Screen, but I do sometimes get a persistent spinner/hourglass. It doesn't seem to prevent any action from being taken, but it's a little distracting and might make you think it's busy and isn't going to respond.

I think he was taking the you-know-what.

Yeah, no.

If you're playing along on a MIDI controller with the transport running to rehearse or record a part, having that enabled will apply any articulations you've added to the live MIDI input in real time.

Tracks > Copy Track Name(s) to Clip Names(s) will do what it says after the fact, but won't rename the underlying files. Conversely, Clips > Bounce to Clip(s) won't change the clip names in the project, but it will apply the current track name to a newly created audio file and append "bounced" and a sequential number to ensure clip names are unique and distinguish them from original recordings. Note that it will also apply Clip Gain, Clip/ARA FX and Audiosnap edits (and merge clips if more than one is bounced at a time), which may or may not be desireable. Utilities > Clean Audio Folder is the intended method of removing un-referenced audio files from the current project's folder and is generally quicker and less error prone than Save As to a new location which is an old workaround.

I don't find that it overlaps, only that the strip divider goes with the strip that's displaced to the right, and no divider is added between the strip and the Prochannel. As I look more closely at CbB, the divider was sort of split between the two, becoming narrower on both sides, but the execution was slightly imperfect there as well with no divider between the section with the global controls and EQ graph. Granted this looks a little unfinished in Sonar, but it doesn't hinder functionality at all, and I would expect the Bakers will revisit this as they continue to refine the new UI.

TLDR

Sure sounds like the pedal is not generating the full range of resistance. I'm not sure off the top of my head what the convention is, but would guess theres a high-resistance connection somehwere so it's never getting as close to zero as it should and limiting how far down the messages will get. It could be the opposite - that there's current leakage when it should be open circuit - but that seems less likely. Maybe take the pedal apart and check for cold/broken solder joints, etc.

The pedal just presents a variable resistance to the keyboard's pedal input. The circuit behind that input passes a small current through the resistance to translate it to a voltage drop which is in turn used to determine the level of controller mssages. It's the keyboard that generates the message, not the pedal. If the messages are not covering the full range, it's likely down to some keyboard configuration estting, but it's possible the pedal isn't generating the full range of resistance from near zero/closed to effectively infinite/open circuit. You can test the keyboard by plugingon/off-style sustain pedal into the input, and verifying you get 0 and 127.

CbB has been slow to open Keyboard Shortcuts for a couple-few years now. The Bakers have never really acknowledged that this changed suddenly from one release to the next. It's only 2-4 seconds on my machine now. The response time can vary, depending on some unknown factor, but I don't think I've ever seen as much as 15 seconds (!).

Okay, I stand corrected. Weird. Tools seem as sharp as everything else here on both my displays (3072 x 1920, and 1920 x 1200) though their styling has not changed so they don't have the fine, crisp lines of many new elements.

Imperfect 17.06:8 aspect ratio? Seems unlikely. I'm thinking maybe you confused the width with a 3070 RTX model number...? A more conventional 16:9 aspect ratio would be 2560 x 1440. If it's really 3070, I wouldn't be surprised that you might encounter scaling issues.

That was my approach originally, but I actually found it more 'fiddly' and error-prone to get all the notes deselected without accidentally de-selecting articulations or altering the range. But it just now it occurred to me to try Edit > Select By Filter, and Articulations are there in the Special Events section. So you can make your selection in the track view, then Select by Filter, click None, re-check the Articulations box, and paste.

MIDI files do not have the capability to store time offsets of any kind, ticks or milliseconds. CbB generally renders any non-destructive MIDI effects/transformations into the MIDI events on saving as MIDI, basically the same as it does when rendering MIDI through a soft synth. I haven't tested this with articulations but I would expect that to be the case.