petemus

But the Insert Assistant is not available in this scenario: I select a bunch of tracks to route to a new bus, Pressing Ctrl I click on the track Output combo button and get the menu. If I then select New Stereo Bus, a bus is created with name Bus <X> and there's no possibility to rename it there and then, but I have to locate it and then rename. The Assistant only helps me with sends, not track outputs. I should have been clearer in the initial post about that it was the track output I was assigning and not a send from the track.

The menu would already be much more compact, if it was broken into submenus Inputs, Buses, Sidechain Inputs and whatnot. Of course those with ridiculous amounts of inputs and outputs would probably still need the wheel control. 😁 There's no reason to have this long, flat menu for all this stuff.

just FYI, here's the discussion I mentioned on GitHub: https://github.com/dotnet/winforms/issues/3691

It seems crashes with certain plugins and instruments in track templates has been resolved. My track templates with e.g. NI Kontakt and Audified Peridot LE now seem to work ok. Thanks for whatever was done to fix it! 👍 It may well have been the VC redist update as well.

I believe this is a Windows/Microsoft bug in the MDI windowing implementation. Some dev somewhere told way back this would be taken a look at (remember seeing a response in some forum), but apparently has not been. There might not be a lot the Bakers can do about it - or it's not worth the work that it would require.

A small but important feature request: When creating a new track folder, bus etc., it would be nice to be able to name the new item upon creation. Now you always have to find the created item and then rename it. Naming the item when creating it would be a nice touch. For example, when sending a group of tracks to a new bus, you always have to find the new bus to rename it. If the name was asked when creating the bus, there'd be no need to navigate to wherever.

I started getting this, too, but it's only a short crackle when I for example start adjusting panning. This is new to me, never happened before. My system: MS Windows 10 Pro, latest updates ASUS TUF Z390M-PRO GAMING Intel Core i7-9700K CPU @ 4.40GHz 32 Gigs of memory, DDR4 3466 MHz 1 TB Samsung SSD 970 EVO Plus 1TB RME Fireface UCX, latest drivers

I've seen this a couple of times. The wait curson is visible quite a bit longer than usual. Once or twice I've even had a crash in the end. Saving the project, I think, was still successful. I could dig up and deliver some dumps to the Bakers.

Yes, the current track context menu could use a few submenus as well.

Might check that one out. Still would prefer the context menu, though...

Thanks , thought of that already. The thing just is, I'm crap at remembering keyboard shortcuts. 😁

It would be nice to access Remove silence etc. commands directly from the clip context menu. It's a bit cumbersome to reach all the way up to the main menu for those... -Pete

Switching between Track and Console views using shortcut D also often leaves a trace of the aim assist on the Console view. Especially, if you press D and move the mouse at the same time the views are being switched. Only a cosmetic flaw, maybe, but something that annoys me, having designed a lot of UI stuff during my career. 😁

Sometimes audio files to be imported have a long silence at the start of the file. Then you hear nothing in a looong time if you audition the file with Play button in the file browser dialog. How about implementing automatic skip to the start of audio when stating auditioning a file? Or, even better, how about rendering a quick, small waveform strip of the file where you can skip to a location you want to audition. These days the auditioning is only useful for files that only have a short period of or no silence at the start of the file.

The "New Plug-ins" could be nice as well. My problem, though, is getting the existing mass of plugs sorted out. Another small annoyance is, when you use the filter function to find plugins, clearing the filter string messes up the position you were in. Why couldn't it stay where it was, but just clear the filter?

I'm trying to sort my numerous Uncategorized plugins into correct categories in the Browser. It's very hard, because the Browser follows the moved plugins to the category they were moved to, and I have to find the spot I was on again to continue assigning them to categories. Would it be possible to add a modifier key to the move operation (shift, ctrl) so that the browser stays where it is after moving the plugins? Or even change the operation so that we always stay where we are? We know the plugins went into the category we sent them to, so why go to that category and show the plugins there, selected? This would very much help me sort out my overly excessive collection of plugins. 😁 -Pete

Submenus would be great here, also breaking long menus to a few columns, like the current FX menu. For sidechaining, there could be a submenu for each bus having FX with sidechain inputs.

Nice to hear. Thanks for the info, @msmcleod!

Hmm, one issue solved (noise with two-track simultanoues recording), another popped up: Saving a track template (and later using it) crashes the app, no crash dump is created. I created a group of tracks to facilitate quick setup for bass recording: two mono tracks (Bass DI and Bass MIC) and an AUX track (Bass), to which the mono tracks are directed. The template is here as an attachment. Latest release of Cake (2021.12, Build 102), Windows 10 21H2 up-to-date, RME UCX with latest drivers as audio interface. Some templates with a plugin also crash the app, have to check if they produce any crash dumps. -Pete Bass Recording.cwx

👍 Thanks, Scook! That was quick! Now that I come to think of it, I knew this could be a problem, just didn't rmember. Alls well now, just got my first proper bass take down.

I have a problem recording two mono tracks simultaneously (a bass DI and mic'd track). Some strange noise is introduced in the tracks, as can be heard on attached audio snippet Two mono tracks recorded simultaneously.wav. However, if I record a stereo track, using the exact same pair of inputs (Analog 1 & 2) on my RME, the left and right channels are noise free as expected, as can be heard on audio snippet Stereo track.wav. How can this be? Is it a bug? Recording either the DI or the mic channel works fine. Buffer size seems to make no difference here, will probably check again, but the stereo track is recorded properly, so that's probably not the issue. My interface is RME UCX with the latest drivers (ASIO, naturally), OS is Windows 10 21H2, and it's up to date. It really feels like this issue is in Cakewalk. Cake is the latest, 2021.12 (Build 102). Any tips or pointers appreciated! Of course as a workaround, I can record a stereo track and bounce it to two mono tracks, but it's now how it's meant to be. -Pete Stereo track.mp3 Two mono tracks recorded simultaneously.mp3

That SunSet thing is ridiculously usable! I bought it already when it was on sale at its release. No regrets whatsoever.

Me too, learned it the hard way. Now exporting from Master bus is second nature for me, no errors there anymore. 😁

It can't stop here, can it? Now C'MON!!!

I didn't know this! Thanks. Now it's much easier for me to just select Master when exporting... I guess it's time again for some RTFM'ing. 😜