Max Arwood

Didn’t want cloud the great post in “Curious- Why Use a Control Surface?” With slightly off track question. 1) Anyone used both tactile vs touch screen device - and can describe the good bad and the ugly of each? Or one of these? 2) Your best phone/pad controller app?

Do you have another DAW to try them in? also have you tried here? https://solidstatelogic.zendesk.com/hc/en-us/requests/new

Which SSL native plugins? And what versions?

Sonar is very outdated compared to Bamdlab cakewalk. Update this first. If crystal disk says you have a problem. You should replace the drive. It is spot on for drive reliability. This could but probably would not cause differences. Like bdickens said sample rate could cause this. What sound card are you using now that you have disabled the Realtek? What are you settings in the audio preferences page ?

You don't have to go outside of cakewalk You can just duplicate the mono track then pan one hard left and one hard right. You can process from there. The plugins will work with a single mono track.

Here are 2 ways duplicate the track 1) pitch up 6c on track pitch down 6c on the other track 2) move one track 10-20 miliseconds foreard then move the other track 10-20 milliseconds back There are many plug-ins that can do this for you. You have to keep in mind that most of these technics can make the audio sound strange. You can also have phase issues. waves ps22, S1 imager* PSP Audioware Pseudo Stereo Melda MStereoSpread * JST SideWidener Plugin Alliance BX Stereomaker, bx control v2 * This is also built into other plug-ins like Waves Abbey Road TG mastering plug-in* Nembrini - PSA 1000* and inside dozens of other plug-ins Good = *

I’m not sure exactly what all you might be comparing but - Melda mcompare might also come in handy. You should look at it. It has gain match built in. You can compare different mixes you have done. I usually load reference tracks and compare to my tracks. It helps to clear your Eq perceptions of your tracks. There are several plug-ins like this one. I think melda is top of the heap on this one. Master the mix has - Reference Plugin Alliance. - ADPTR A/B Ozone and others

No rendering required. 1)Just put gain match in as the 1st plug-ins on a track or on a bus. 2)Add as many plug-ins as you like. 3) add another gain match as the last plug-in in the chain. Gain match will label the 1st instance as a. Then it will name the 2nd instance as b. Once this is setup there is a speaker icon in the b version that you can click to hear the before all the plug-ins version of the track or bus. The great thing about it is it will “gainmatch” the two signals so you hear the “real” changes and not the boost that the plug-in vendors almost always add. “Louder is better will be eliminated. You will be totally shocked about some plug-ins and plug-in chains!! There are some details I left out for simplification. Be sure the read the docs!

This is a great plugin! I know they just did some optimizations to the code but I think it could use some more! code tweaks - it needs to be even more efficient. I'm happy so far and hope for these guys to buckle down and do the Archie Bell (Tightenup) lol!

I’m doing the demo now. Why is there a 8.4 db reduction in volume on the plug-in?! I also can’t get cakewalk to load because system version takes over the drivers.

Yes - gainmatch. I hate the way some plug-ins pump the volume up - like black box. It is designed with way too much gain. It still sounds great. Gain match will show you the winners and losers in plug-ins. Watch out for plugin gainers, even a part of a db can be deceptive!

Haven’t seen this.

That's a great idea. That was I could add 10 more plugins and bounce to another track and add 10 more plugins and so on.

Collin - I am running an older Echo card Original Layla 24/96 No problems with 1909 18363.1379. I would probably get better latency with a newer card LOL! Thanks to Pete Brown for the great video and tweak guide and for checking in here!

This update fixes an intermittent graphic issue causing a crash/freeze on some systems. https://relabdevelopment.com/downloads/

bonjour service Is installed

yes dropbox one drive or teamviewer. it is kool how it works but I'm not looking for more drivers loading into my computer.

Yea for now!

I looked at the demos yesterday. I just wonder what the monthly charges will be?

It is + - 6 DB. I bought it but after the new wore off I don't use it. It is very clean sounding if that is what you are looking for. Try the demo.

I have done tv spots and 1 hour broadcast shows editing in Vegas for 15+ years. The secret is not to upgrade till the next version comes out with the next version free. Use 14 till the 15/16 upgrade comes out. Then use the 15 till 16/17 comes out lol! They have most of the bugs out when the next version of out. Sony had more stable versions.

I’ve been using VNC remote on my iPhone and tablet. I also have tranzport but wish I had faderport to record some volume automations. I wonder how this would work for recording volume automation??

I usually unmute the fx section then mute each fx one at a time. Then I add the new fx. I work with the new fx till I think it sounds good. You can now leave the track as it is but it is best to un freeze the track and refreeze with the newly added fx. This will reduce confusion later. Edit - just a note - after you unfreeze be sure to unmute all the fx before you refreeze the track.

Works done here.

Don’t remember the tech guys name. I tried the repair on the freshly booted machine. Still did not fix the errors. Called tech line and the guy tried a few things, then he deleted all my waves stuff. Next he did a fresh install. It still retired out. So he downloaded a new waveshell. This fixed the song so it would open. This happened a few months ago too. As long as they keep fixing it I’m happy. It is a little bit of a pain. I think they have a great collection of plug-ins.