HIBI

@scook The link that on your comment takes you to "Selecting clips" page. Is that ok?

2 hours ago, Yuka said:

ロールバックで一度解決しました！

とりあえず、ロールバックで解決したようで何よりです。
その後、再度最新版にアップデートしてみましたか？
再度最新版にアップデートする事で、問題のプロジェクトが同様の状態に陥った場合、そのプロジェクトをサポート（開発陣）に提出する事を検討して下さい。

53 minutes ago, Starship Krupa said:

It is difficult for me to be certain from your video, however it appears that Cakewalk is stopping before it creates your projects' UI (User Interface).

The toast notification is stopping at "Almost done..." after passing "Creating UI..." in actual fact.

@Yuka
問題のプロジェクトをクリックしてから、どの段階で読み込みが止まるのか（右下のトースト通知内容がどこまで進むか等）、具体的な状況説明があると問題点が見えてくるかもしれません。

また、何かエラーメッセージが表示される場合、エラーメッセージをキャプチャーして画像を投稿してみて下さい。その際、一時的に環境設定で表示言語を英語にし、英語のエラーメッセージを投稿する方が良いでしょう。

ちなみに、１つ前のバージョンに戻すロールバックインストーラーが用意されていますので、ロールバックして問題が解決するかどうかを確認する事も出来ます。（Current Release: 2020.05 スレッドにロールバックインストーラーのリンクがあります）

I'd like to mention to clarify the purpose of this thread.
The point is users do not notice that there is an update of BandLab Assistant because no update message is displayed when running v5.2.0.

I am just concerned what will happen when the next CbB update available. Will CbB be updated without any problems via old BandLab Assistant, or find no update?

On 6/21/2020 at 12:37 AM, Dillon said:

But, when I export the project (to WAV) the drums are just slightly out of time, by less than a second but it is definitely still audible.

I may be misunderstanding but does it mean that the drums sound (e.g. Cymbals) is cut off at the end of the song?

13 minutes ago, InstrEd said:

Just make sure we all don't update if they have a 6.66 software update ?

Probably I will jump in it. ?

14 minutes ago, John Vere said:

Mine shows in the bottom there did you miss seeing that?

Your BandLab Assistant v5.2.0 had shown an update message?
I'm still running v5.2.0 but there is no update message.

Just wondering...
No update message is displayed when starting BandLab Assistant v5.2.0, however, there is new BandLab Assistant installer version 6.0.0 on https://www.bandlab.com/products/cakewalk. Why no update message on BandLab Assistant?

I'm running Windows 10 (1909) that upgraded from Windows 7 but I've never seen it.

This "Windows lifecycle fact sheet" might be helpful.
https://support.microsoft.com/en-us/help/13853/windows-lifecycle-fact-sheet

1 hour ago, Nigel Mackay said:

For what it is worth my vstscan.exe is also version 6.0.3.0.  Dated 03/06/2020 15:00. And it works. Details are identical to Milton's.

Same here and having no problem. (FYI: Running Japanese Windows 10)

7 minutes ago, Ralph Graham said:

all good now     thanks all!

Glad to hear that.

1 hour ago, Ralph Graham said:

the info on teh site says WIN 7 up  but part way thru instal says WIN 8 up

For your information, that popup just mentions that it is not officially supported in Windows 7, however, Cakewalk by BandLab can be run on Windows 7 for now. (I don't know what will happen in the future.)

Have you followed the instructions page below?
https://www.cakewalk.com/Documentation?product=Cakewalk&language=3&help=Introduction.30.html

18 hours ago, bitflipper said:

As long as it's not a silent workaround and the offer comes up in a yes/no messagebox. That way, users will have the option of either accepting the suggested fix or addressing it themselves. Some users are married to ASIO for one reason or another, and would prefer to troubleshoot the issue first. I'm normally not a fan of such potentially annoying verbosity, but it's not like this scenario is going to be an everyday occurrence.

Completely agree.

6 hours ago, Caio Cavalcanti said:

Same problem for me. Hangs on "Downloading ...4/5" and that's it!

You might want to try with no Add-ons are checked because 4/5 download is done in the case of you. If it works, try to install Add-ons in addition.

1 hour ago, Noel Borthwick said:

We should offer to auto switch the driver mode to WASAPI when no audio devices are detected.

Good idea but it had better popup a description dialog to accept/deny, not silently switching.

16 hours ago, Jim Roseberry said:

Be aware that some Z490 motherboards are active cooled (meaning small high-RPM fan).  

ie: Gigabyte Z490 Vision D (quality board) looks passive-cooled... but there's a fan under the heatsink.

You can hear that tiny fan ramping up with CPU usage.  It's high-pitched and annoying.

Can you control RPM of that fan on the BIOS?

and just wondering... Which is better choice 9th i9-9900K or 10th i7-10700K?

On 5/28/2020 at 4:49 AM, Daigo Kawai said:

Reparing Windows redistributable stuff

Have you tried reinstalling Visual C++ Redistributable 2015-2019 (x64, x86), not repair?

21 hours ago, msmcleod said:

Yeah, I had 2 separate licenses. When I went for the upgrade, it said it would merge both my existing licenses to a single license (with a limit of up to 5 activations), for the price of a SINGLE upgrade from Editor v4 to Editor v5.

So yes, two v4 licenses upgraded to one v5 serial number.

Thanks for the info.
FYI: This is the case with "editor" or "studio" serials only. (Celemony support said)

4 hours ago, Kevin Perry said:

You can revert fader changes to the previous value (right click on fader in track view at least).

Good point! Yes, you can if you remember what you changed which track or knob. (It's even better if Ctrl + Z can revert it, btw) However, sometimes do not notice it for a while and can not remember it. (especially, when an accident is the cause) and then scream "What I did??? F#$%!!!". so I believe it helps if it's in the history.

10 hours ago, msmcleod said:

I've just upgraded Melodyne to version 5.  It merged my two existing Melodyne 4 licenses into a single license (which was great, 'cos I only got charged once ? ), and it automatically moved 2 x Melodyne 5 licenses to my iLok account.

What does "merge two licenses" mean?
Two licenses will be upgraded with one serial for upgrade?

Please log all operations to Edit > History.

Especially, Moved fader or knob (the changed value) in the console because this can be accidentally changed with mouse wheel and can't remember what you did how much... It would be nice if you can undo it with Ctrl + Z.

or... Add option to disable the value change with mouse wheel in the console view.

Wrong URL?

Upgrade from any paid iZotope Product is $167.16 with code GROUP
https://www.jrrshop.com/izotope-tonal-balance-bundle-crossgrade

In the track view:  Drag a track to a new position in the Track view.

In the console view:  Holding Alt key and Drag a track or bus.

I believe two Octa-Capture or two Studio-Capture will work, however, you had better ask roland that a pair of Octa and Studio will work or not.