HIBI

3 hours ago, NealClark said:

You are getting confused by trying to "Save" your project as an MP3. This is not the method. You should go to File > Export Audio where you will be presented with the option to save in various formats, including mp3.

He is trying to export with the Export module instead of File > Export > Audio.

18 hours ago, Starship Krupa said:

Here's an old forum post outlining the steps to take to enable not only those three, but the Boost 11 limiter. For the record, I think they're power-packed:

@Starship Krupa Boost 11 Peak Limiter comes standard with Cakewalk. Actually, Cakewalk which is installed on my secondary PC (SONAR is not installed) also has it. Seems it comes standard since April 2018. So Kurre's claim in the old thread seems correct. Boost11 be listed as both "Enabled" and "Excluded" in the Plugin manager. (In short, there are two Boost11 in different locations and one of them is listed as "Excluded".)

@Tyler Cline
As scook said, MP3 Export Options dialog appears after clicking [Save] in your pic.

[Track view] Options > Click Behavior > Double Click > Audio Clips >

Change the bit rate in MP3 Export Options dialog box that appears when trying to export audio as mp3.

The "S" means "(Area) Selection". It's respected in the case of Copy selected area and Split at selection, etc. If I remember correctly, you can not turn it off for now.

You can clear it with keyboard shortcuts Ctrl+Shift+A (anytime anywhere) or Shift+Esc (only when track view is active) or Clicking empty area in the clips pane.

If you have Melodyne 5 license, download latest installer (currently v5.0.2) from your Celemony account and install it. Melodyne 5 installer replaces Melodyne 4 to version 5 (If reactivating Melodyne is required, restart Cakewalk after reactivating). And if VST scan is set to manual, re-scan at the preference in Cakewalk.

To make sure the version of Melodyne, make a Melodyne region FX clip (Anything is okay) and open it and then open "About..." from the Help menu on the Melodyne.

Strange... I'm glad to hear it's solved anyway.

So you can not open the synth UI from either the synth rack or the track header icon?
Same result of all projects? or only that project? or only that track?

Supposing that you have the piano roll view in the MultiDock.
Click the [X] button of Piano Roll tab at the bottom to close the piano roll view.

Check this similar thread:

I couldn't get out of "Please wait..." but it was works when accessed to User Area (https://www.ikmultimedia.com/userarea/) directly, not My Products page etc.

@scook The link that on your comment takes you to "Selecting clips" page. Is that ok?

2 hours ago, Yuka said:

ロールバックで一度解決しました！

とりあえず、ロールバックで解決したようで何よりです。
その後、再度最新版にアップデートしてみましたか？
再度最新版にアップデートする事で、問題のプロジェクトが同様の状態に陥った場合、そのプロジェクトをサポート（開発陣）に提出する事を検討して下さい。

53 minutes ago, Starship Krupa said:

It is difficult for me to be certain from your video, however it appears that Cakewalk is stopping before it creates your projects' UI (User Interface).

The toast notification is stopping at "Almost done..." after passing "Creating UI..." in actual fact.

@Yuka
問題のプロジェクトをクリックしてから、どの段階で読み込みが止まるのか（右下のトースト通知内容がどこまで進むか等）、具体的な状況説明があると問題点が見えてくるかもしれません。

また、何かエラーメッセージが表示される場合、エラーメッセージをキャプチャーして画像を投稿してみて下さい。その際、一時的に環境設定で表示言語を英語にし、英語のエラーメッセージを投稿する方が良いでしょう。

ちなみに、１つ前のバージョンに戻すロールバックインストーラーが用意されていますので、ロールバックして問題が解決するかどうかを確認する事も出来ます。（Current Release: 2020.05 スレッドにロールバックインストーラーのリンクがあります）

I'd like to mention to clarify the purpose of this thread.
The point is users do not notice that there is an update of BandLab Assistant because no update message is displayed when running v5.2.0.

I am just concerned what will happen when the next CbB update available. Will CbB be updated without any problems via old BandLab Assistant, or find no update?

On 6/21/2020 at 12:37 AM, Dillon said:

But, when I export the project (to WAV) the drums are just slightly out of time, by less than a second but it is definitely still audible.

I may be misunderstanding but does it mean that the drums sound (e.g. Cymbals) is cut off at the end of the song?

13 minutes ago, InstrEd said:

Just make sure we all don't update if they have a 6.66 software update 😉

Probably I will jump in it. 🤪

14 minutes ago, John Vere said:

Mine shows in the bottom there did you miss seeing that?

Your BandLab Assistant v5.2.0 had shown an update message?
I'm still running v5.2.0 but there is no update message.

Just wondering...
No update message is displayed when starting BandLab Assistant v5.2.0, however, there is new BandLab Assistant installer version 6.0.0 on https://www.bandlab.com/products/cakewalk. Why no update message on BandLab Assistant?

I'm running Windows 10 (1909) that upgraded from Windows 7 but I've never seen it.

This "Windows lifecycle fact sheet" might be helpful.
https://support.microsoft.com/en-us/help/13853/windows-lifecycle-fact-sheet

1 hour ago, Nigel Mackay said:

For what it is worth my vstscan.exe is also version 6.0.3.0.  Dated 03/06/2020 15:00. And it works. Details are identical to Milton's.

Same here and having no problem. (FYI: Running Japanese Windows 10)

7 minutes ago, Ralph Graham said:

all good now     thanks all!

Glad to hear that.

1 hour ago, Ralph Graham said:

the info on teh site says WIN 7 up  but part way thru instal says WIN 8 up

For your information, that popup just mentions that it is not officially supported in Windows 7, however, Cakewalk by BandLab can be run on Windows 7 for now. (I don't know what will happen in the future.)

Have you followed the instructions page below?
https://www.cakewalk.com/Documentation?product=Cakewalk&language=3&help=Introduction.30.html