Milton Sica

I don't have any plugin windows open. All are closed. I do indeed have some 32 plugins inserted into the project. Plugins I don't have version 64 to use.

I don't have any plugin windows open. All are closed. In my perception, there was an increase in the availability of the UI.

I would like approaches from friends who don't see running the application as administrator is not a good idea. Do you think you don't need this priority? I would love to learn about this.

I ran tests by opening about 20 projects. All took on average more than 1 minute to open. Always run the application as Administrator When opening the application, you can already see better performance, making the START SCREEN screen available much faster. This did not happen in the previous version. What I can report is that projects that took 1.30 m/1.40 m to open now open in 30/35 s. I don't know if this was expected. I don't know what operations are carried out to close a Project, but I think that maybe it also deserves to be observed if there isn't something better in the routines, because I observe that for many seconds the application appears as NOT RESPONDING. Maybe it was possible to put in the Performance Module or another screen the effective opening time of the project. Suggestion.

Very good and working !

Yes.

@msmcleod @Noel Borthwick PICTURE CACHE - Any problems reported about PICTURE CACHE? I had some problems opening some projects that only worked after I cleared the PICTURE CACHE folder. In one of the previous versions, 2022.09 (???) information was inserted that the application itself would manage this, deleting the oldest files when it needed more space. Other projects keep getting the message COULD NOT FIND OR OPEN THE FILE and it crashes. The information that project save operation is in progress. When approaching via Task Manager to close the application I verify that there are Teleport Server(32) services in progress. I think it could be something related to the audio device, because I notice that if I disconnect and reconnect the USB, the application returns to work normally.

@msmcleod I detected very strange behavior. After a change I made in the preferences of the audio settings for ASIO, I was informed if I would prefer to change it to WASAPI, because I'm running on a DELL notebook where I only have Realtek installed, the mouse pointer started to have a round gif, like if it was operating something, but in fact it works whenever any menu option is pressed. The mouse continues to function normally, but with the pointer changed. I changed it to Wasapi Shared and the application made the mouse pointer available again.

I do the same.

@msmcleod @Noel Borthwick I don't know if it might be related to the same issue, but I noticed the following issue. I'm using Melodyne 5.1.1.003 VST3 and noticing that Time Ruler is advancing almost half the time. Example: If the note starts at time 132 the line is already at 132.5 when the note of 132 is issued. I noticed this at EA and it has remained now.

Hello. It's definitely in some sort of configuration. I'll leave it to @msmcleod to opine.

For me it worked perfectly. In the second option which was how I was using it, how to change the view of the percentage increase or decrease to have decimals?

I am not able to increase the BPM by 10%, that is, from 110 to 121. With MIDI tracks this is no problem at all. The problem is with the WAV tracks. Follow my thought. 1) If I increased the BPM by 10% when using the STRETCH tool (CTRL+Shift+Mouse) I drag the track size to 90%. 2) Or, if I increased the speed by 10% the same decrease should be done on the WAV track. Even doing it this way, the sync is not established. I'm not here worrying about the PITCH of the voice or guitar.

There was no Portuguese translation in the plugin replacement option: REPLACE AUDIO FX.

Hello. Do we already have a topic to comment on the production version 2022.11? I ask why I installed it and I am encountering some problems. Yesterday I created a new project with the EA version and it was saved with the same version. Now, when trying to open it again with version 2022.11, it's just been more than 5 minutes trying to open it and it won't open.

@msmcleod Thank you very much. Pardon ! I thought that this innovation would make this improvement also in this operation. After all if I "select track and bus" my understanding is that when we say "all tracks" selected, in fact it is: - Will work for ALL selected TRACKS - Will work for ALL selected BUS. Separately for BANDS and FOR BUS.

@Noel Borthwick I downloaded the new EA and it still remains as follows: - Either delete or change all FX, even if TRACKS and BUS are selected, it only works within the TRACKS or BUS scope, depending on where the right button has been clicked to access the MENU. If this is the expected behavior then I suggest it be clarified in the functionality detail. - On a MIDI track with more than one existing control the lines remain in the same color causing confusion as they mix. The impression I have is that the sampling is always given by the highest value of one of the controls. Example: If I have Tremolo-120, Modulation-90 and Pedal - 50. The line that appears behind the MIDI notes is the largest, that is, in this case: Tremolo-120. So I think this functionality is very good, but it would need to be improved to actually show all existing controls in their correct values.

Replacing a plugin with another that has automations keeps the automations of the replaced plugin and the same happens when the plugin is deleted. My opinion is that both replacement and deletion should exclude any plugin automation.

I agree and I think the time is now, because it is quite strange that you can REPLACE ONE EFFECT by another using CTRL or CTRL SHIFT and not be able to DELETE in the same way only ONE by ONE. Here's a great opportunity for that!

This feature is very good, but it should show the MIDI controllers in different colors, because when there are more than one controllers used, it is quite confusing. Case: I created a MIDI track and inserted 3 controllers. In track view they are seen as a single controller. This would look much better if each controller was shown in the color it appears in the MIDI panel. In this way, reinforcement is good, but only for the existence of a controller.

Shouldn't this operation reach ALL SELECTED TRACKS? I understood that this would also reach the existing effects on the BUS, but it only works separately on the selected tracks or the selected BUS. If I have several tracks selected and I command in the tracks section, the replacement does not reach the existing effects on the BUS, even if selected. The same happens in reverse. It's strange that you can REPLACE ONE EFFECT by another using CTRL or CTRL SHIFT on several tracks and not be able to DELETE in the same way. Here's a great opportunity for that!

Thanks for the answer. However, I insist: It would be very difficult to put in the EA version the same as in the production version, that is: THERE IS A more up-to-date VERSION (EA). I think this would prevent users who collaborate on the review from being able to keep an eye on what's latest. I go further. There is a Preferences option where users express their interest in collaborating with improvements. So this can also be used, even to make this alert even while the application is in use, that is, at time intervals, or even when closing the application so that the collaborative user is alerted of the existence of a new compilation. Just a suggestion to improve the flow.

Hello I think your statement is opportune to bring up one that I suggested some time ago, which, unfortunately, doesn't work when we're in the EA version. For example: I had downloaded version 006, but when checking the DAW if I'm up to date it confirms that I am. Only you are now saying that there is already a 008 and that this would be in the initial POST, but it is not. We only know if we click on the LINK and visualize the sequence in use. I think it's a good time to implement that, even though it's an EA version, it can identify if there's a newer EA version just like the production version. That would make it a lot easier for everyone.

Hello. As I explained. 1) I want to effect an entire track, considering it as a clip. 2) Order EXPORT TO CLIPS all at once. This is possible to do for all clips that are selected. However, the effect(s) must already be in the CLIPS. So in reality what I would need is that I could select MULTIPLE CLIPS and ADD TO THOSE MULTIPLE CLIPS the effect(s) and then be able to render.

Case: 1) I have several tracks. 2) I select it and consider it as a clip where I insert an effect. 3) And command EXPORT TO CLIPS I have to do this procedure TRACK-BY-TRACK. I wonder if there is a way to include one or more feats in the track and render them all at the same time?