-
Posts
508 -
Joined
-
Last visited
Posts posted by Heinz Hupfer
-
-
Hi:)
UACC is the same for all Spitfire Libraries (Will be a Standard for other Companies hopefully) and the Keyswitches you can for sure use for all others, you only have to fit the number of it.
Some have Articulations from C0 to F#0 only and some from C0 to B1, it varies....
So you can use this Artmap as a Starting Point
Greetz;)
Bassman.
- 1
-
Hi:)
I divided it into the following groups (Midi following)
Keyswitches (C0-B1)
Standard
Core Techniques
Decorative Techniques
FX
All CC32 with UACC Specification
CC32 - Long
CC32 - Legato
CC32 - Short
CC32 - Decorative
CC32 - Phrases & Dynamics
CC32 - Various
UACC List (CC32)
Long (sustain)
1 Generic
2 Alternative
3 Octave
4 Octave muted
5 Small (1/2)
6 Small muted
7 Muted
8 Soft (flaut/hollow)
9 Hard (cuivre/overb)
10 Harmonic
11 Temolo/flutter
12 Tremolo muted
13 Tremolo soft/low
14 Tremolo hard/high
15 Tremolo muted low
16 Vibrato (molto vib)
17 Higher (sultasto/bells up)
18 Lower (sul pont)
19 Lower mutedLegato
20 Generic
21 Alternative
22 Octave
23 Octave muted
24 Small
25 Small muted
26 Muted
27 Soft
28 Hard
29 Hramonic
30 Tremolo
31 Slow (port/gliss)
32 Fast
33 Run34 Detache
35 Higher
36 LowerShort
40 Generic
41 Alternative
42 Very short (spicc)
43 Very short (soft)
44 Leisurely (stacc)
45 Octave
46 Octave muted
47 Muted
48 Soft (brush/feather)
49 Hard (dig)
50 Tenuto
51 Tenuto Soft
52 Marcato
53 Marcato Soft
54 Marcato Hard
55 Marcato Long
56 Plucked (pizz)
57 Plucked hard (bartok)
58 Struck (col leg)
59 Higher
60 Lower
61 HarmonicDecorative
70 Trill (minor 2nd)
71 Trill (major 2nd)
72 Trill (minor 3rd)
73 Trill (major 3rd)
74 Trill (perfect 4th)
75 Multitongue
76 Multitongue muted80 Synced - 120bpm (trem/trill)
81 Synced - 150bpm (trem/trill)
82 Synced - 180bpm (trem/trill)Phrases & Dynamics
90 FX 1
91 FX 2
92 FX 3
93 FX 4
94 FX 5
95 FX 6
96 FX 7
97 FX 8
98 FX 9
99 FX 10
100 Up (rips/runs)
101 Downs (falls/runs)
102 Crescendo
103 Decrescendo
104 Arc
105 SlidesVarious
110 Disco up (rips)
111 Disco down (falls)
112 Single string (Sul C/G/etc.)
Greetz;)
Bassman.
- 1
-
@scook
No. Just don't know how to make a script for this Buffersize changing.
Have to take a look at CoordMode and Client....
Greetz;)
Bassman.
-
On 7/18/2021 at 3:35 AM, scook said:
Opening preferences, launching the ASIO tool and changing buffer sizes is well within AHK's capabilities though.
@scook
I can't see this! Open Preferences OK, no prob, but within the preferences you can't select the main Tabs, only the settings within a Tab, means if you are in Devices, I can't select driver settings with Autohotkey.
If Driver settings are selected I can switch to the Asio Panel, but then with my Audiocard at home (UR44C) I'm not able to switch to the buffer settings without mouse.
(TAB does only switch between "OK" and "Cancel")
How would you do that?
Mouse clicks with Autohotkey are difficult cause the windows sometimes open on the first sometimes on the second monitor. (last opened posistion?)
Thanks;)
Bassman.
P. S. I don't need to switch that often, but just tried to do it with Autohotkey.
-
HI @msmcleod
Thank you for reporting back! Very nice you fixed it!
For sure no problem to name the tracks without the "-" as far it exists no fix!
Thank you a lot!
Bassman.
-
Hi again:)
Attached 2 Videos with the Track names crashing and not crashing!
https://1drv.ms/u/s!Al2mKojzOW0Mq5hrJgZYdhXaaT5HBg?e=gZ912W
Bassman.
-
Hi msmcleod:)
I named them Bounce works and "not" . It's just with and without the "-".
https://1drv.ms/u/s!Al2mKojzOW0Mq5kgdnibDY9xbcnKPw?e=vi9Cae
The steps are Bounce (Track(s) to File (32bit to 16bit))
Thank you:)
Bassman.
-
HI there:)
It's very weird, but I found out why it crashes without error prompt.
What I did:
The Project has 3 Tracks ( Announcement, The Song(s) itsself and Outtakes ) (Live Recordings in Studio with Video)
with Waves CLA-2A, LP 64 EQ and Old School Boost 11 as Last Limiter (-1 dB) on each Track.
My Standard Busses with Master, MIX, 4 Reverbs Busses, 3 Delay Busses, a Chorus Bus and a Preview Bus, but only used the Mix (Spectrum Analyser) and the Master (Izotope Insight 2) Bus for listening.
Bounce to Audio Masterfile (Track and 32 bit MIX to 16 bit Master)
So I deleted first every Plugin one by one, saved it to a new file and tried to Bounce the Song Mix to a Master File.
No chance until I had at least only 1 Track and Master and Mix Bus with NO Plugins.
Ok, I decided to delete this last track, made a new one and imported (drag&drop the Songmix(32bit) again and it worked.
Tried again with the last saved project and now I saw it!
The WINNER is:
The Labeling of the Track to Bounce! Unbelievable!
Ok, loaded my first Mastering Project with Plugins and Busses and renamed the Track to Bounce and ....voilà. WORKED!
So😁 Labeled the tracks first:
"Audio - Master - 16bit"
"Announcement - Master - 16bit"
"Outtakes - Master - 16bit"
Labeling it to just Audio it bounced without any problems including the plugins.
Further on I deleted "16bit".....crash
Deleted "Master - ".....crash
Deleted "" - " .....worked
Insomma: It's the "-" (Minus) Character which makes the chrashes! WOW! I've had this with Cakewalk very long ago with the German "ä", "ö" and "ü" which made it impossible to load a project.
Ok, solved for me for the moment!
Greetz;)
Bassman.
- 2
- 1
-
Hi☺️
Trying this out tomorrow morning! CbB is closing immediately!
Same Project with 2021.04 does bounce without problems.
Tried without any plugin inside a new project. But more tomorrow. I hope I get some error😁
Bassman
-
HI:)
Same problem as "paul terry", can't bounce any audiotrack. Crashes without any error, so no dumb file !
Have deleted any plugins in the project (not many, cause mastering project) but even with the pure audiotrack it crashes!
Windows 11 and Windows 10!
Rolling back to Version "April" helps. All fine with it!
Tried only with 32 bit Mixfile(44,1 kHz) into 16 bit mastered with a few plugins on the track and without plugins, doesn't matter.
Tried a complete new project with the mixed audiotrack, no chance!
Mixdown Tracks (the project) to a new track works perfect.
Thanks;)
Bassman.
- 1
- 1
-
HI:)
😁🤣
Ok, so obviously criticism not welcome......sorry I wrote something!
Bassman.
- 1
-
HI:)
Very cool, but i can hear some bad intonations. For example the very first note and at second 8 and much more, they are too low for my ears and I don't mean the bendings, only the holded (with bending or without) notes.
IMHO;)
Greetz:)
Bassman
-
Hi:)
Changed the Energyoptions to High Performance (not visible on first start). (100% MIN and MAX) (You have to manually start "powercfg.cpl")
Changed USB Settings not to switch the Hubs off.(Device Manager)
Changed "No Sound" in the Win Sound Settings. (Settings/Sound)
Now I can Play the Project down to 64 Samples Buffer (2ms) with no crackles. At 48 Samples the first Crackles appear but no Drop Outs!
At 32 Samples Dropouts, but 64 Samples with this Project is fantastic, so I have to revise my first post for sure. I'm not mixing with such low buffers but for recording it is fantastic!
I can now work with it and I will stay with Win 11!
Next point is, that the Drawing of the smooth shape envelope with freehand is now very fast in 4K Resolution (3840x1920). Don't know if it were the bakers or it is Win 11:)
ProChannel Drawing of Gain is now faster too. That's very nice. Could be more faster, but much better than in my Win 10, sometimes I have to wait 2 seconds to see the result of using the Controller with ProChannel. Now it's within the second.
Testing more Win Settings to improve the audio performance, but for now it's very good.
Greetz;)
Bassman.
- 1
-
HI:)
Sorry, in English I can see "Overall App Performance" and "Engine Load", when I have the mouse over the Performance Modul in the Control Bar.
At 1024 Samples Buffer it is in Win 10 11% App Performance and 31% Engine Load MAX,
in Win 11 30% App Performance and 50% Engine Load MAX with the same Project.
But I have not changed anyhing in Win 11 yet, perhaps it will be better If I switch some knobs in Windows.....there are some post with improvements, I have to do a closer look at it, cause Win 11 is very nice, I like the new features!
Bassman.
P.S. I rapidly look into the Energyoptions in Win 11. The MIN and MAX Performance Values were on 5% and 70%. I changed both to 100% and now it's much better!
Engine Load better than in Win 10 now!
App Performance 24% and Engine Load at 25%, so I'm pretty sure, we can find some knobs for Improvements! I'm diving into it the next days......
-
Hi:)
Ok, I tested a current project in Win 10 and Win 11! (Intel i7-9700/3 GHz, 32 GB Ram)
Made a complete fresh install with Win 10 a half year ago which I now updated to "DEV" Win 11.
My Old Win 10 is on another Disc so I can start it independently!
I used Steinberg UR44C for both Windows, this is my HomePC, in Studio I have RME HDSP 24/96 and Audiobox 1818VSL, but no Win11 installed yet and I don't want to at the moment after this test!
Let's look at the project first:
Drums: Superior Drummer 3
Bass(Synth): Avenger (Don't laugh:) I'm a Bassplayer, but for this song I need a Synth Bass)
Piano: Lounge Lizard 4
3 Instances of Session Horns Pro (Kontakt)
Swam Sopran Sax
TTS-1
22 Instances of Schepps OmniChannel Stereo
8 Tracks Guitar(2 Verse, 2 Intro, 2 Prechorus, 2 Chorus)
22 Miditracks.
2 Reverbs and 1 Delay on Busses used, 2 other Reverbs and 2 Delays on busses not used in this project. (4 Reverbs and 3 Delays as a template)
Always playing the Section with the most Instruments playing!
My old Win10 (had a few problems with paths and plugins cause I did not use this Win10 for half a year)
1024 Samples Buffer (Percentages are up to, if "11" they vary from 6 to 11, I always mean the MAX Percentage)
App: 11 / Engine: 31
512 Samples Buffer
App: 12 / Engine: 34
256 Samples Buffer
App: 14 / Engine: 45
128 Samples Buffer
App: 17 / Engine: 54
64 Samples Buffer
App: 24 / Engine: 65
==========================
Windows 11: looks very nice and I want to switch with all of my PCs to it, but not in this Beta Stadium!
1024 Samples Buffer (Percentages are up to, if "30" they vary from 15 to 30, I always mean the MAX Percentage)
App: 30 / Engine: 50
512 Samples Buffer
App: 30 / Engine: 60
256 Samples Buffer
App: 33 / Engine: 82
128 Samples Buffer
App: 47 / Engine: >200 and I can hear Crackles, sometimes Dropouts appear! Can't work with 128 Samples!
64 Samples Buffer
Not possible to play the project!
The difference is blatant!
Doesn't look pretty good for Windows 11 in this Release stadium! I hope I can switch back to Win 10......
https://www.giga.de/artikel/windows-11-deinstallieren-zurueck-zu-windows-10/
Greetz;)
Bassman.
- 1
- 1
-
HI:)
QuoteIf anyone has Win 11 installed and running feel free to send us any compatibility issues you might encounter.
Downloaded it but waiting for my weekly Backup on Friday. Testing Win 11 then over the weekend!
Uuups, it's installing immediately:( So good luck to me😁
Greetz;)
Bassman.
P.S.
Installed! Windows works so far. Loaded CbB and started a few projects. No Problems to plkay them, but I have to make more tests over the weekend. No Time anymore for today.......
- 2
-
HI:)
Love this Shape Smoothing. In my case, if I use it slowly, I can see the line drawing, as soon I move it faster, it shows after releasing the mouse Button.
Looks like it's the same problem like changing Values in the ProChannel with Controller, I can see the result seconds later in the PC, but I hear them immediately.
I can live with that, but I think it will look better when it reacts much faster:)
No problems with all other new features so far, great new things in this release, my favourite is to reorder multiple Tracks at once👍
Bassman.
Video:
- 1
-
HI:)
Schepps is the best Channel I've ever heard, and the possibilities are insane! I love this Stereo/Mid-Side/Duo Mode Switch.
Duo Mode is fantastic
Bassman.
- 2
-
Hi:)
Bought 2, got 2 more for free!
Thank you;)
Bassman.
- 1
-
HI:)
In PRV and Inline PRV I can move to previous/next Note with "TAB", then I can change Note Length, Velocity, Move Notes +- (Snap) with Keyboard Shortcuts or with Controller.
Now when I want to do this with Playing a Loop , the "TAB" Key to select the next/previous Note is not working, I have to stop , press TAB and Play again or use the mouse to select the notes.
Would it be possible to let TAB work on Play?
Thanks;)
Bassman.
-
HI:)
The fastest way is with AZController and a Rotor or a Fader like in this video:
I'm moving Next/Previous Section, Next/Previous Marker and Next/Previous Bar, then some other movements....Next/Previous Clip for example or moving the Selection....
Greetz;)
Bassman.
-
HI:)
I've had this on my Studio PC "Crackles and Pops every 10-20 seconds" with 2048 buffers. Can't find the problem and then I went down to 1024 buffers and everything was fine again!
So I now do recording with 128 and mixing with 1024 buffers. Perhaps the same problem on your machine? Please tell me if you then find out what it is....
Greetz;)
Bassman.
- 1
-
-
HI:)
Here two links from AZController site which are interesting for you.....
https://www.azslow.com/index.php/topic,288.0.html
https://www.azslow.com/index.php/topic,119.0.html
Just write if you need more help for this.....
Greetz;)
Bassman.
[Solved]NoControllerReset=1 in an ins file doesn't work anymore
in Instruments & Effects
Posted · Edited by Heinz Hupfer
Hi:)
Can somebody confirm? All Controller do always reset at Stopp, the setting "NoControllerReset=1" in an .ins file is not recognized anymore. (Since 2021.6)
I have to deselect "Preferences/Project/Midi/Reset Controller at Stopp" for my Controller to work correctly😒
Thanks;)
Bassman.