reginaldStjohn

I would put any sample libraries on the SSD and your projects and audio folders. I personally like an SSD for my boot drive as well since it boots up so much faster then a standard spinning hardrive.

What audio device are you using? What sample rate, driver mode etc. are you using? This sounds like your sound card is set to one sample rate and the Cakewalk project is set to a different rate. Please see the tutorial section for some basic setup and instruction.

I have not tried this personally but I would think that Melodyne would be your best bet. You could try to copy the file to several tracks and then filter them to try to isolate each peiece a bit more. It probably won't be perfect but might get you somewhat close. Cymbals are going to be the hardest I would think.

You probably need to describe your question a bit more. Also, including your system specs and what you have tried. Screen shots, audio and video clips all can be helpful. I know you included your project file but I cannot try it right now

Ah, got it.

Seems that only the expansion is free when I Look at it.

Try some of the tutorial in this link

For the windows 11 issues you should go and check that windows did not enable any disabled hardware, like built in sound card etc. Also, check your power plan and windows defender scan paths and exceptions.

I don't know why it would be ignoring the clip automation but here are a couple of questions and things to check. - How are you exporting the audio? Make sure that your export options include the appropriate automation. - Make sure that if this clip(s) are in a track with multiple takes that you have bounced the comped track, or as you mention, Flatten comp. - Use track automation instead of clip automation.

I am not looking at Neutron right now but unless there are two separate channels in Neutron to send to then you are just combining both the guitar and vocal track into the side chain to compress the keyboard part. You would have to instatiate two separate compressors and send the guitar to one and the voice to another to compress the keyboard differently based on the send track.

The matrix view? https://www.cakewalk.com/Documentation?product=Cakewalk&language=3&help=Views.46.html

Please take a look at the documentation. There are also several tutorials to help you get started. https://www.cakewalk.com/Documentation?product=SONAR&language=3&help=Views.30.html https://discuss.cakewalk.com/index.php?/forum/35-tutorials/

4K 47 inch monitor here. Have not noticed it being any less crisp then Studio One or others that I use. Some have complained that some menu's text look more blurry but I have not noticed that.

The FX won't modify what you see ony what you hear. To have the waveform altered, if for some reason this is important to you, you wouild have to bounce the track to audio to apply the effect permenently to the audio. https://www.cakewalk.com/Documentation?product=SONAR X3&language=3&help=Mixing.45.html#:~:text=Click the Track view Tracks,Track(s) dialog box.&text=Select the first destination track for the mixdown.&text=If you've saved a,now in the Preset window.&text=Tracks.,-Choosing this option The images can't be seen because cakewalk stores their images for the documentation on an http rather then a secure https server. You have to add cakewalk.com and some other site to your safe sites browser list. I have done this and still get pages that doen't show the information.

Without seeing your exact routing it is hard to tell but it seems like the following might be happening from your description. - You have a send to a Amp Sim that outputs to a bus - You also have the audio track going somewhere as well? Usually, I just put the amp sim on the track. I personally would not send my guitar track to an amp sim using a send unless I was trying to blend the amp sim sound with the non effected sound. Sends are usually, not always, used to send a portion of a signal to effect it and then have it blend in with the original signal.

Talent, practice, good ears, knowledge, passion and the right tools. Same thing that makes people good at any endevour.

Did you ever send in your project to msmcleod?

I don't think you can get rid of it unless there is some color setting where you could blend it in? here are all the options. https://www.cakewalk.com/Documentation?product=Cakewalk&language=3&help=Views.03.html

When you say it won't load do you mean it doesn't show up or you try to load it and nothering happens? Try doing a vst reset and rescan. https://www.cakewalk.com/Documentation?product=SONAR&language=3&help=Mixing.40.html#:~:text=Go to Edit > Preferences > File - VST Settings.,-2.&text=Under VST Scan%2C click the Reset All VST Plug-ins,to your folder default settings.

Did you record a mono or a stereo track? There is a stereo/mono interleave button on each track. Try toggling that to see if it makes a difference. Also, make sure your master bus is set to output to a stereo output on your mixer.

I have had this problem in the past but not experienced it recently. If I recall the only fix I found was to re-install my audio interface drivers.

Submit a support ticket and send them your project. Maybe they can reproduce it.

try the web installer

I would suggest sending one of your projects to cakewalk support to see if they can help you. Support@cakewalk.com

See this post and see if it helps.