Jump to content

[CLOSED] Cakewalk 2021.01 Early Access


Morten Saether

Recommended Posts

On 1/16/2021 at 5:17 PM, Sébastien Langlois said:

Greetings to Cakewalk Team!

I use cakewalk since 1999! I love this DAW and even if i think there are other good software out there, I simply am unable to switch to another DAW...and don't need nor want to anyway. Cakewalk does the job marvelously! This being said, here's a suggestion...

-Bus Folders in the console and track view : Folders wich also act as an aux track or bus...with all the functions (like Reaper...sorry about that!)

-In the console view, putting  ''Delete Send'' , ''New Aux'' at the beginning of the scroll list when you want to delete a send from or add an aux to a track.

Wow, I love this idea!

Link to comment
Share on other sites

On 1/16/2021 at 2:13 PM, Steve Harder said:

If I open project that includes Ozone 9 Elements by shift-open and skip Ozone 9 other issues crop up

Replying to myself to retract my 01.2021 issue comment.  The issue was likely caused by a plugin, the issue was created and saved in 11.2020, but I first noticed the issue when I next loaded the corrupt project which happened to be just after I installed EA 01.2021.  The devil is always in the details.

I'll do more research before jumping to a conclusion next time.

And thank you to the developers who push Cakewalk forward.

  • Thanks 1
Link to comment
Share on other sites

On 1/16/2021 at 7:30 AM, Bruno de Souza Lino said:

Even after the update, CbB is unusable. Type 1 audio dropouts every few seconds of playback, tweaking plugin parameters causes dropouts, sometimes pausing playback causes dropouts...In the current project I'm working, it takes me a few minutes to EQ a single track because you tweak a setting during playback, it causes a dropout, you go back play, then a random dropout occurs...I'm already running at the maximum latency I can.

With all respect your problems are pretty much unique to your setup. You don't need upgrades, you need to contact supposrt and discuss each problem with them personally.

Link to comment
Share on other sites

On 1/17/2021 at 9:36 AM, Will_Kaydo said:

Translator gave this:

Hi everybody! I have been using the program since 2009. I constantly miss one important option. You need to make two outputs from each channel.

Can this be moved to the Q&A forum for futher discussion? 

Requests go to Feedback Loop.

Link to comment
Share on other sites

6 minutes ago, pwalpwal said:

you're requesting it goes to q&a when it should go to feedback loop? it's encouraged that change requests go to feedback loop

I'm not requesting that. Read carefully! It's another user speaking Russian!!! I only translated what he said quoting him in that too!!!!!!!!!!!

Screenshot_2021-01-18-17-52-21.thumb.png.11872d6f071fecee23959c9aa99b2d57.png

Scroll back and go check! 

Edited by Will_Kaydo
  • Like 1
Link to comment
Share on other sites

44 minutes ago, Nigel Mackay said:

With all respect your problems are pretty much unique to your setup. You don't need upgrades, you need to contact supposrt and discuss each problem with them personally.

Is there a product support contact email for cakewalk bandlab?

Link to comment
Share on other sites

33 minutes ago, pwalpwal said:

 next bit is your request for it to be moved to q&a, right?

 

Yes because it's a topic for a Q&A. Cakewalk already give's us infinite tracks to route outputs to with Patchpoints and Sends. 

This is not the platform to discuss this. Inbox if you want to talk about anything. This thread is for feedback on 2021.01. 

Edited by Will_Kaydo
Link to comment
Share on other sites

On 1/16/2021 at 5:30 AM, Bruno de Souza Lino said:

Even after the update, CbB is unusable. Type 1 audio dropouts every few seconds of playback, tweaking plugin parameters causes dropouts, sometimes pausing playback causes dropouts...In the current project I'm working, it takes me a few minutes to EQ a single track because you tweak a setting during playback, it causes a dropout, you go back play, then a random dropout occurs...I'm already running at the maximum latency I can.

For last and this update I have been getting these Type 0 dropouts .. at this stage I am getting these with my older Cakewalk project files. Only time I dont get these dropouts is with brand new file, though I have not tested that enough yet.

The error I get as file loads is below, consistently. Plus it takes a while to load the files, longer than I would expect. System is Core i5, 16GB Ram, 1TB HD sata. And if they play, they do so with crackles eventually crashing with this dropout error 0 again.

So I decided to try something. I have an AUDIENT EVO 4 audio I/F ( latest Drivers ). I decided to switch the AUDIO in CW Prefs to WASAPI so I could change over to the built in Realtek soundcard. BODA BING ... not alone did any of the "trouble" files load up without this dropout error, they also loaded super fast, no crackles.

So do i have to conclude that CW doesnt like the AUDIENT EVO 4 ASIO Driver? I just also tested the following .. I switched the AUDIENT over to WASAPI and once again BODA BING :D .. all seems to be well, fast file load, no crackles, no dropouts .. so far

Seems to be ( in my case ) the Audient Asio driver is the issue???

CW_Dropouts1.jpg

Edited by aidan o driscoll
Link to comment
Share on other sites

35 minutes ago, aidan o driscoll said:

For last and this update I have been getting these Type 0 dropouts .. at this stage I am getting these with my older Cakewalk project files. Only time I dont get these dropouts is with brand new file, though I have not tested that enough yet.

The error I get as file loads is below, consistently. Plus it takes a while to load the files, longer than I would expect. System is Core i5, 16GB Ram, 1TB HD sata. And if they play, they do so with crackles eventually crashing with this dropout error 0 again.

So I decided to try something. I have an AUDIENT EVO 4 audio I/F ( latest Drivers ). I decided to switch the AUDIO in CW Prefs to WASAPI so I could change over to the built in Realtek soundcard. BODA BING ... not alone did any of the "trouble" files load up without this dropout error, they also loaded super fast, no crackles.

So do i have to conclude that CW doesnt like the AUDIENT EVO 4 ASIO Driver? I just also tested the following .. I switched the AUDIENT over to WASAPI and once again BODA BING :D .. all seems to be well, fast file load, no crackles, no dropouts .. so far

Seems to be ( in my case ) the Audient Asio driver is the issue???

CW_Dropouts1.jpg

It would appear that something is inefficient when running with that ASIO device if its not showing an issue in WASAPI.
Hard to say since we've never used that device. Will try and contact the vendor and ask them to send us an interface for testing.

Link to comment
Share on other sites

1 hour ago, Noel Borthwick said:

It would appear that something is inefficient when running with that ASIO device if its not showing an issue in WASAPI.
Hard to say since we've never used that device. Will try and contact the vendor and ask them to send us an interface for testing.

Thanks @Noel Borthwick .. much appreciated ..

Same crew who gave us the ID4 I/F

https://audient.com/products/audio-interfaces/id4/overview/

Edited by aidan o driscoll
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...