Promidi

I calculated I should have got the 28gig file at around 1 hour 14 minutes (I'm on a 50mbit/s connection)....... but as others have postulated, UVI servers might have been hammered with this insane upgrade price....

Did you download through UVI Portal or via direct link? I find UVI Portal a little on the slow side, so I used a download manager. This uses multiple network sessions to grab this files. Using this, I managed to download it in around 4 to 5 hours....

What version of Cakewalk by Bandlab are you using? How dense is your controller data in your projects?

Not for this particular one.

Are you able to set the MIDI track's patch as well. If not you could always insert a patch change at the start of your MIDI track. Press CTRL P where you want the patch change to occur....... You will have to look in the user guide to work out what number corresponds to which patch (program).... you have 128 to choose from. The pianos are usually in the lower numbers.

Need more information. Versions, plugins? Cakewalk version?, etc Just a few minutes ago, I saved a two simple instruments (Magix Engine 2.7.017 as the synth) as track templates. No crash here.

The reason I never use the Event Inspector or MIDI FX plugins, is probably more the do with my work flow. I mainly do MIDI only projects. I work with single clips per track. If I used MIDI FX plugins, they would effect the entire track. As regards the Event Inspector, the parameters that I can change using this I use CAL scripts. One thing I see people changing with this are the channels of events in a track to be the same. I have a quicker way to do this. In Cakewalk.ini (in the "%appdata%\Cakewalk\Cakewalk Core" folder ) there is a setting under the [WinCake] section which is RechannelMIDI=1. What this does is that, when I bounce to clips, it changes the MIDI channels of all the event's in the clips to be bounced to match that of the MIDI track itself. You see, I have 16 tracks, the MIDI channels of which are 1 to 16 respectively. Therefore, all I have to do is selected all, then do a bounce to clip. This corrects the MIDI channels of the entire project so that their MIDI channels match the track number. Of course, the resultant clips stay on their original tracks. These MIDI channels arenot really important for notes as these MIDI channels are overridden by the track's MIDI channel. Those Individual event MIDI channels become important when you are in single lane controller view. If individual controller events that are on the same track are set to different channels, you may not see some of those controller events on a given lane, because those lanes are restricted to a viewing controller events single channel. I use many, many MIDI, RPN and NRPN controllers in my MIDI projects. I do not want to miss any. As far as inspecting events.... I only really would use this for drum notes, so I can know what NRPN values to use to change those individual note paramters. There are many times I need to know the actual number, not the name (c#, Bb, ect). I have a CAL script that tells me channel, number, velocity and duration of a single selected note. Yes, I could just mouse over it, but the text is tiny. Note: There are some CAL commands that categorically will crash Cakewalk. An example is EditSlide and EditSlide40. If you want to slide an event, you have to find another way to do it. (By adjusting the Event.Time value) There are also some differences in the say some commands are handled between versions. For instance, in Cakewalk Pro Audio 9, the using the Editcopy, Editcut and Editpaste (and their *40 variants) with without parameters, brings up a dialogue box for the respective command. In the latest Cakewalk by Bandlab, these commands, without parameters, simply perform their respective functions without prompting - which is great for scripts. That is something you will not find in any manual anywhere. Sorry..... I'm waffling now...... I'll stop here......

I have loaded plenty of old Cakewalk pro audio 9 MIDI only WRK projects and it's never changed the Audio driver preferences. They turn off the audio automatically when I open them because nothing in those projects use those audio engine. Cakewalk is smart enough the turn off the audio engine if nothing in the project is using it. But just to check, there is a little icon under the now counter (to he left of the MIDI panic button). If that is lit, the audio engine is running. That has to be off for the tempo ratios to work.

I don't have this keyboard, so I can only guess at this. With Upper 1 to 3, do these respond independently to MIDI channels 1 to 3 respectively? (Make sure all part switches are on - page 42 of the RD0800 manual) if so, then what happens if, in Cakewalk, you set one MIDI track to channel 1 and the other MIDI track to channel 2 Have a look at the inspector for the MIDI tracks (with the track selected , press i to show the inspector), and change their channels there. It's the top most item on the left column of the inspector.

A bit about your system might help. Audio interface? Settings? Driver mode, Sample rate, bit depth, buffer sample size? Version of Cakewalk (Numerically - Don't just say "The latest") Confirmed latest drivers? Version of Windows? Fully patched? Latest version of SINE Player Release (latest being 1.0.4.561) Latest C++ runtimes installed

Custom made CAL scripts and custom made Studioware panels are my go to. For instance, add triangle wave of pitch bends to get vibrato; Select pitch bends and then change the selection to ease in (or out). Set the last event of multiple pitch bends to zero. Select a bunch of pitch bends and then change them to a series of pitch bends that start and the first selected value to the last. Align a controller, wheel event, or lyric event to a note. etc. Split note into 2, 3, 4 notes, you know, those kinds of things. Next would be the PRV. I really only really use Event view to view event details - and to see patch changes. I never use the Event Inspector or MIDI FX plugins. Note: I do CAL scripts and custom made Studioware panels while in PRV Why ? Speed of editing and also, I can be sloppier with my mouse precision (which again makes editing quicker). It should be noted that you can bind CAL scripts to keybindings. You cal also add CAL scripts to Studioware buttons and add Studioware panels to keybindings . The bakers really should consider allowing the editing of these with from within Cakewalk again. (To hell with those who couldn'/wouldn't t use it - those who would will benefit greatly). Mind you Some CAL commands behave differently with the latest Cakewalk by Bandlab)

Sounds like the RD-800 is set to receive on one channel. It appears that both of your recorded Cakewalk MIDI tracks are transmitting on the same MIDI channel. This would be why the sustains on each track, affect both tracks. Can you set the RD-800 as a multitimbral instrument - that is can it be configured to play multiple tracks, each on its own channel?

The only thing I can think of is that all 3 ratios are set to 1.0 If they are not (1 = 0.5 2 = 1 3 =2), then maybe drop a note to Cakewalk support. https://help.cakewalk.com/hc/en-us/requests/new?ticket_form_id=360000025633 (I hope they don't simply tell you it's a depreciated function)

In the latest iterations of Cakewalk, for the tempo ratios to function in a given project, then all of the following conditions must exist in that project. You must have a MIDI only project - no audio components (Even a VSTi synth will prevent tempo ratios) You must set the clock of your project to "internal" - preferences | Project | Clock You project's metronome must be set to "Use MIDI Note", not "use audio" - Preferences | Project | Metronome The Audio engine must not be running Any action that starts the audio engine will prevent the tempo ratios from functioning.

Note: Requires Kontakt full version 5.5.1 or higher.

Which version of Cakewalk?, Which version and build of Windows? Have you ruled out the possibility of a plugin doing this?

Sounds like a sustain MIDI event is being sent In the track that contains the stuck notes, you might want to check the event list and look for controller events that could be doing this. The usual suspects would be CC64 to CC67. There might also be an automation lane that could contain sustain MIDI events.

Are you able to download Bandlab Assistant? Then you can use this to download Cakewalk by Bandlab https://www.bandlab.com/download/assistant/windows

What didn't work, the Bandlab download from my link (which I just retested and it works from here) , or the installation from a successful download. What version of Windows are you running. Have you installed all the latest patches - including the latest Vdist C++ runtimes The latest Vdist C++ runtimes are downloaded from here: https://support.microsoft.com/en-au/help/2977003/the-latest-supported-visual-c-downloads Hare you tried temporarily disabling your antivirus program Have you tried running Bandlab installer as admin? If you cannot log on , then the sounds like you have systemic PC issues (unrelated to Bandlab Assistant) Sounds like you will need someone to physically visit to help troubleshoot your PC issue that is preventing Bandlab Assistant from working properly. (Even if Bandlab Assistant is the only program you're having issues with)

Are you logging of with your Cakewalk credentials (recommended) or your Facebook / Google credentials Try uninstalling Bandlab Assistant then downloading from here and reinstalling - even if you do have the latest version (The latest version of Bandlab Assistant 6.00) https://www.bandlab.com/download/assistant/windows

Or anything from any VST company for that matter...

You might want to start a new thread. When you do, can you give us more information - like audio interface, buffer size driver mode, what you have tried so far?

You might want to start a new thread. When you do, can you give us a bit of info regarding your audio interface and what you have tried so far.

I'm doing fine thanks. Regarding workspaces (Note: it was once called Lenses in earlier versions) See: http://www.cakewalk.com/Documentation?product=Cakewalk&language=3&help=Lenses.1.html

Are you using Workspaces? If so, set workspaces to None. If you're intentionally using workspaces, configure the workspaces you're using not load screen layouts. Note: I also use screensets in my projects and they do indeed remember the console view settings.