msmcleod

maybe a plugin in demo mode?

We're all as much in the dark as you are. It's just a matter of manually checking for updates periodically. Someone usually will post when a new version appears though, quite often before its officially announced. It's only been 6 weeks since the last update however, and if they're working on something big, or a risky fix, it's likely to take longer for a new update. BandLab have been pretty good about not releasing Cakewalk until they're sure its ready.

IMHO JBridge is FAR superior to BitBridge, as it has so many compatibility options to tweak. Cakewalk's integration with JBridge is good to. You no longer have to fire up JBridger to create 64bit wrappers around your 32 bit plugins. If you go into the plugin properties (either from the Synth rack, or Plugin Manager), check "Load with JBridge wrapper" and the next time you load it, it will be with JBridge. Cakewalk also uses its original VST id, so you can swap between BitBridge and JBridge without it thinking it's a different plugin. FYI JBridge can also help with 64 bit plugins, such as the UJAM Virtual Guitarist VSTi's which seem to require a crazy high buffer size otherwise.

This forum disappeared for me yesterday too. I normally use Chrome for this forum, but it was telling me the server refused my connection. On Firefox however, I got some weird holding page - you know the sort that gives you loads of links to "related" sites. I tried flushing my dns cache twice - the same thing. I gave it 30 mins, and the forum was back. I'm not running any sort of VPN here.

Back in the early 80's this was my best "PC" for music production...

Ah I see - it's a limited edition anniversary model. That makes sense. 40 years of x86 based processors.

An Intel 8086k... surely that's a typo... unless you're really using one of these old things ? [Edit] - WOW I stand corrected... those things really do exist.... that's confusing.

After a lot of research, I'm just about to invest in a Rode NT1. I prefer the flatter response compared to so many other condensers that tend to boost the high end. Next on my list is the Slate VMS... but I'm meant to be saving up for a deposit on a new house, and my wife will NOT be happy if I spend £1K on a mic!

That's the official site, so it'll be the best place.

Whether it shows sharps or flats seems to depend on the current key (ALT + SHIFT + 6).

Are you using your onboard sound device? These are known to be noisy. Quite often if its on a laptop, running it on batteries solves it (but obviously causes issues with performance etc). If you've not got a separate audio interface, consider getting one - something like a Focusrite Scarlett 2i2 would be ideal as a starter interface.

I use a ground loop isolator like this, between my audio interface and my monitors: They're around $9 / £6 from Amazon.

The Bank No. / Program No. must be being reported back from the VSTi. I've got a few VSTi's that I know respond to bank select (like Yamaha's old XG softsynth), but don't report a patch list. If I host the XG VSTi in Cantable, and route from Cakewalk via a hardware MIDI interface it will receive the Bank Select, but hosted in Cakewalk, it never gets it. Same with SysEx.

In general, if you've got a MIDI interface then any MIDI compatible keyboard controller will work with Cakewalk. Most keyboard controllers are USB nowadays (the good ones are both USB & MIDI), but again, most will work with Cakewalk. I'm unaware of any that don't. As far as recommendations, it's a bit difficult to answer this without knowing a bit more about what you're wanting to use it for. There's basically four types of keyboards: 88 Note weighted keyboards (basically like a piano). 25, 37, 49, 61, 76 note full size keyboards - these can be semi-weighted or not. So basically your standard organ or synth type. 25, 37, 49 & 61 "Minikey" keyboards - like the old Yamaha portasounds. 25, 32 & 37 note nano keys - really small keyboards, usually used for non keyboard players, portability (i.e. will fit in a laptop bag), or for triggering keyswitches on some VSTi's. All of them may or may not come with the following: Velocity Sensitive - the harder you play, the louder the sound. Most have this, but check just the same - IMHO it's really a must. Aftertouch (Pressure sensitive) - this is rarer nowadays, but basically it can alter the sound by "pushing" the key with more pressure whilst you have the key held down. I quite often use this for vibrato. Pitch Bend Wheel - for doing pitch "bends" ( a bit like bending a string on a guitar, or using the whammy bar) Modulation Wheel - usually used for introducing vibrato, but can be assigned to most things like filter cut-off, or a leslie speaker effect. DAW Controls (such as faders, transport controls), extra knobs & sliders to alter your synth sounds Obviously that's a lot of features to take in, and there's dozens of keyboards out there depending on what you want. I'd take a think about what you're going to use it for, then shop around. If you've found something you like feel free to ask for opinions here. [Edit] Ones I'd personally recommend: 88 note: Studiologic SL88 Studio Full size: Too many to mention, but Alesis & Native Instruments do good ones, as do M-Audio. Cheaper options are Samson & Behringer. MiniKeys: The Korg microKey range NanoKeys: M-Audio Keystation mini32, Korg nanoKey

If you did record audio, and you didn't check the "Copy all audio with project" setting when you saved it, e.g.: Then your audio will be saved in your global audio folder, as specified in your preferences: To find out what the actual audio files are, select Project->Audio Files from the menu: This will bring up a dialog, showing all the audio files used by your project:

All your RAM sticks need to be the same. So just remove the smaller one, or replace it with one EXACTLY the same as the other one.

The TTS-1 that comes with CbB is 64 bit, but I was thinking that because you had Sonar 6 installed it may have been trying to load the 32 bit version. It sounds like you've got things working of a fashion... Have you tried running Cakewalk as Administrator? As far as the transport is concerned, to automatically rewind, set this option in the track options:

Nah, I cheated... it was a 1TB SSD ?

Yeah, I noticed that. It could well be the issue. All RAM sticks should be exactly the same capacity and speed. RAM issues can be a nightmare to track down because they're so intermittent, but this seems an obvious one. I'd recommend ditching the 1GB stick.

FWIW, for giggles, I made 100 pure audio tracks in Cakewalk on my 2.6Ghz i7-6700HQ laptop. Every track had the pro-channel engaged (compressor. EQ and console emulator), and a Scheps 73 EQ. They all had to have their faders turned down considerably as it was LOUD with all tracks going at once. But not once did it complain.

I would contact support over your password issue: https://help.cakewalk.com/hc/en-us/requests/new

Are you using any look-ahead plugins ? Linear Phase plugins can introduce latency of 1 to 2 secs, depending on how far ahead they need to look. If you are using them, you can turn off the PDC if you need to do any tracking. But any plugins that have to look ahead aren't really designed whilst your still tracking - they're for mixing only.

I wonder if it's trying to load the 32bit version of TTS-1. Is there more than one entry for TTS-1 ? As for your other synths/effects, you need to make sure that their location is included in your VST scan path. Also, note that whilst BitBridge can load 32 bit VST's/VSTi's in Cakewalk, 32 bit DirectX plugins (such as the TTS-1 that came with Sonar 6) will not work and will likely crash.

I wonder if updates to the plugins affects this. In other words, if the VSTi parameter list changes, it could affect Cakewalk's ability to restore the patch. The only thing that goes against this theory is that the normal workaround to stop this happening is to save your VST patch as a Cakewalk-style patch. I'd have thought the mechanism of reloading was the same for both, but maybe not.

I've tried them on Windows 10. They work fine.