Jump to content
Noel Borthwick

2019.09 Feature Overview

Recommended Posts

Authors: Noel Borthwick, Morten Saether


Introduction

Hot on the heels of our biggest 2019.07 release, our new 2019.09 release is no slouch, with over 85 bug fixes and feature enhancements. This release focuses on stability, optimizations, plug-in compatibility as well as fixes several long standing problems.  We've also made further improvements to comping workflow based on user feedback and implemented several popular feature requests from the community.

The following highlights are intended to provide an overview of the more significant changes, along with screen captures to help illustrate feature usage.  Please also refer to the new features section of our documentation for more detailed information on the features.

Please give us feedback on this release. We hope you like it!
 

 

Editing and Comping Enhancements

 

Duplicate Selected Clip(s)

You can quickly duplicate the selected clip(s) with any of the following gestures:

  • Press CTRL+D
  • Click the Track view Clips menu and select Duplicate Selected Clip(s)
  • Right-click in the Clips pane and select Duplicate Selected Clip(s) on the pop-up menu

The following rules apply when duplicating clips:

  • Only events and clip automation are copied.
  • The new clip(s) will be pasted immediately after the existing clip(s), respecting the current Ripple Edit settings.
  • To respect the current Snap to Grid settings, go to Edit > Preferences > Customization - Editing and select Use Current Snap Settings on Duplicate Selected Clip(s).
  • After duplication, the Now time is forwarded to the end of the duplicate (with the duplicate selected), so you can press CTRL+D again to make multiple duplicates
  • Unlike a normal paste, the current track will have no bearing on where the duplicates are pasted. Duplicates will always appear on the same tracks/lanes as the source selection.

Tip: If you want to quickly create many repetitions, use the Edit > Copy and Edit > Paste Special commands.

EXAMPLE: Duplicate the selected clip using menu commands and keyboard shortcut, with and without Snap to Grid.

Duplicate Selected Clips.gif

Paste / Paste Special behavior change

In the previous versions of Cakewalk, settings in the Paste Special dialog box (Edit > Paste Special or CTRL+ALT+V) would persist for the remainder of the Cakewalk session and apply when you used the regular Edit > Paste (or CTRL+V) command. As a result, normal paste could potentially create multiple repetitions inadvertently. By default, normal paste no longer remembers the settings from the Paste Special dialog box, so you will only get one copy. To remember the Paste Special settings, go to Edit > Preferences > Customization - Editing and select Use Paste Special Options on Paste.

 

Take lane record options

You now have improved control over how new Take lanes are created during recording. The following options are available from the Record button image.png context menu and Edit > Preferences > Project - Record:

  • Create New Lane.    Always create a new lane for each take.
  • Reuse Existing Lane.    Reuse existing lanes for each take (this option is not available when using the Comping record mode).
  • Reuse Existing Lane, Unless Takes Overlap.    Reuse existing lanes for each take, and only create new lanes if takes overlap.
     

EXAMPLE: Specify the take behavior via the Record button menu or Preferences dialog box.

Take lane record options.gif

 

Import directly to Take lanes

File > Import > Audio and double-clicking to import from the Media Browser now respect the selected Take lane.

 

Fast Edit filter switching in Take lanes

You can now use SHIFT+right-click to toggle the Edit Filter in lanes.

 

New key modifiers for edits in Take lanes

  • CTRL+ALT+drag adjusts a single crossfade
  • Hold SHIFT and drag a clip edge to crop an individual clip
  • Holding SHIFT on Comp track (lanes collapsed) now allows for adjusting split location across lanes

 

Change fade type on crossfaded clips in Take lanes

Cakewalk now allows for the adjustment of fade types (Linear, Slow Curve, or Fast Curve) for clips in Take lanes. Right-click the top part of a clip fade to show the curve type pop-up menu.

image.png

 

Use ripple edit for copy/paste/cut

Cakewalk now uses ripple editing (Ripple Edit Selection) during Edit > Paste Special when Slide Over Old to Make Room is selected, and during Edit > Cut Special when Delete Hole is selected. 

 

SHIFT+double-clicking a clip no longer hides other tracks

SHIFT+double-clicking a clip maximizes the clip, but no longer hides other tracks. This allows you to still show other tracks by scrolling or zooming the Track view vertically.

 

SHIFT+ESC to clear selection

In addition to clicking an empty space to clear the current selection in the Track view, you can now also press SHIFT+ESC.

 

CTRL+Y to redo

In addition to CTRL+SHIFT+Z, you can now also use the standard Windows redo keyboard shortcut CTRL+Y.

 

Stability

  • All reports of loss of plug-in states when loading projects have been addressed.
  • Intermittent crashes when adding plug-in side-chains were fixed.
  • Setting Track Input to same Patch Point as Output crashes. Patch points have been removed from dropdown in Selected Track Inputs dialog box.
  • Focusrite ASIO Devices could create a buzzing sound when stopping playback rapidly.
  • Some ASIO devices could result in unstoppable playback when stopping and starting the transport rapidly.
  • Improved ASIO first buffer processing when starting playback.
  • User reported ASIO crash on playback start.
  • User reported Crash when deleting MIDI track.
  • Rapidly stopping and starting playback could rewind the transport unexpectedly.
  • Crash editing plug-in automation envelope during playback.
  • Some plug-in’s such as Acorn Digital could cause a hang when changing presets.
  • Edit commands to ‘Delete Hole’ or ‘Slide Over Old to Make Room’ could occasionally have unexpected results. These commands now use standard ripple edit behavior.
  • Some legacy .WRK files could cause a hang when attempting to open them.
  • Adding a synth in the FX Rack could cause all plug-in automation to get orphaned on next load of the project.
  • Hang when rapidly clicking Track view menu bar buttons.
  • Patch points or Aux tracks could cause a memory leak leading to a dropout.
     

Plug-ins

 

Improvements to plug-in state loading and presets

Saving and loading plug-in states and presets has been streamlined and greatly improved and simplified to prevent unexpected interactions with some third party plug-ins. By preventing redundant plug-in parameter updates, plug-ins and synths now load faster when opening project files. 

A few users previously reported intermittent cases where plug-in settings could be lost when changing plugin presets, copying FX chains or when loading projects. All such reported cases of this problem have been thoroughly investigated and addressed so these problems should no longer recur.


Support for VST3 Program Changes

  • Cakewalk now supports changing programs for VST3 plug-ins via a new Program change parameter. There is now a Preset value at the end of the automation parameter list that will change plugin preset values for plugins that support it. NOTE: This Preset parameter is only displayed for plug-ins that expose VST3 program changes to the host. (It may not always be named “Preset”)
  • Waves plug-ins support the new program change parameter.
  • The new Preset parameter can be automated via envelopes. 
  • For supported VST3 plug-ins, program changes can be done during playback via MIDI messages. To do that you must enable Translate Program Changes in the plug-in properties first and then restart the app.
  • For some plug-ins, program changes can be expensive. Don’t use sweeps to automate the program change parameter. Instead use jump events or linear sections.


Overhaul of plug-in time sync in engine
There has been an overhaul of the engine to improve and optimize time sync with plug-ins. The changes improve the accuracy of time synchronization while seeking on the timeline during playback and while looping. We also addressed known problems with time sync with Melodyne and other time dependent plug-ins that have an internal timeline. 


Support for VST2 plug-ins without binary block persistence
There are a few VST2 plug-ins that do not support binary block persistence. E.g. VCV Rack. Cakewalk now properly restores parameters for such plug-ins when loading projects
 

Optimizations

The overhaul of plug-in time sync in the engine improved the efficiency when playing back or looping projects with lots of plugins, by eliminating many unnecessary and costly time unrolling conversions. This should yield moderate CPU gains while playing or looping projects at low latency with lots of plugins, since the plug-in time conversions are now optimized.

By preventing redundant plug-in parameter updates, plug-ins and synths now load faster when opening project files.

Faster loading of project files containing many plug-ins and synths. 
Switching plug-in presets are now faster since there are fewer parameter updates.

Exporting or bouncing projects containing clips stretched using élastique audio is faster, because stretches are no longer pre-processed prior to rendering.

 

UI Updates


Auto Crossfade toggle in Track view

In addition to the Track view Options menu, you can now also enable/disable Automatic Crossfade via the new Automatic Crossfade button image.png  in the top right corner of the Track view. You can also right-click or long press the button to specify the default crossfade type.

EXAMPLE: Enable/disable Auto Crossfade, and specify the default fade curves.

Auto Crossfade Toggle.gif

 

Piano Roll view Note names

Note events in the Piano Roll view can optionally show note names (pitch or custom note names from instrument definitions). To show note names, click the Piano Roll view Notes menu and select Show Note Names.

Note: Note names automatically hide at low zoom levels.

EXAMPLE: Show/hide Piano Roll view Note names.

Piano Roll view Note names.gif

 

Piano Roll view shows correct note colors while dragging

Previously, all notes were always shown in the same red color while dragging. When dragging notes from multiple tracks, it was difficult to know which track a note lived in. Notes are now drawn using the correct track color.

EXAMPLE: Correct track colors are shown when dragging notes from multiple tracks.

PRV note colors dragging.gif

 

Updated ‘Basic’ Lens

The Basic lens has been updated to provide a cleaner and simplified layout. 

image.png

Note: Updated factory lenses and Help Module content are now copied to the user folder during installation.
 

Insert Audio track and MIDI track shortcuts
You can now quickly insert a new audio or MIDI track by using the following keyboard shortcuts:

  • Insert Audio Track = CTRL+T
  • Insert MIDI Track = CTRL+SHIFT+T

Note: CTRL+T was previously assigned to Hide tracks not in selection.

 

Updated transport behaviors

  • Go to Start and Go to End buttons now accurately seek to project beginning and end, and do not stop playback.
  • The W (rewind) key always seeks backwards in time to the prior "landmarks". There are 3 landmarks:
    • the original playback start time
    • the loop start time
    • the project start time (time 0, or 1:1:0)

Note: 
The RTZ command has been renamed to Rewind to Landmarks
The Go to Beginning (1:1:0) command has been renamed to Go to Start (RTZ)
The Go to Start transport button uses the CTRL+HOME shortcut

 

Click Behavior

‘Left Click Rewinds to Clip Start in Lanes’ option

When isolating clips in Take lanes during playback, the Now time jumps to the clicked location by default. To automatically jump to the clip start instead, enable the Track view Options > Click Behavior > Left Click Rewinds to Clip Start in Lanes option.

Note: This option replaces the previous SHIFT-click behavior.
 

‘Left Click Sets Now’ option behavior change

The Track view Options > Click Behavior > Left Click Sets Now option only sets the now time during playback when using the Smart tool, Comping tool, or Move tool (when clicking whitespace only). All other tools do not set the Now time when clicking in the Clips pane.

 

Improved Reset/Panic

The Reset button image.png in the Transport Control Bar module now clears stuck MIDI notes on virtual instruments more reliably.

In previous versions of Cakewalk, both hardware MIDI outputs and virtual instruments shared the same reset method, which used controller 123 (all notes off) by default. VST3 as well as some VST2 soft synths don’t respond to controller 123, and instead require individual note off messages in order to clear stuck notes.

In Cakewalk 2019.09, the Reset button sends both controller 123 and individual note off messages to soft synths. For hardware MIDI outs, if necessary you can use the PanicStrength Cakewalk.ini variable to specify the default behavior:

PanicStrength=0 (controller 123; default)
PanicStrength=1 (individual note off; slower)
 

Force a reload of the audio and MIDI engine

To force a restart of the audio and MIDI engine (only if the transport is not playing/recording), including a reset of ASIO, hold down the CTRL key and click the Reset button in the Transport Control Bar module.

image.png

 

Mackie Control enhancements

This release features many significant enhancements to the Mackie Control surface, including:

  • ProChannel EQ, Track Compressor & Bus Compressor support
  • Korg nanoKONTROL Studio support for Select button, Buses/Track selection
  • HUI Protocol support
  • Disable Handshake option for surfaces which only support the newer MCU protocol
  • Automatic Fader assignment based on order added within preferences
  • Key press support for function buttons / footswitches
  • Added button mappings
  • Updated command list to match Cakewalk's internal list

Support for alternative param labels

You can now specify alternative label names for your parameters within MackieControl.ini. This may be useful if the automatic abbreviated 6 character label isn’t as readable as you’d like.

The alternative labels are still limited to 6 characters (as this is the limit of characters for each strip on the Mackie devices), but you can now specify your own by adding them to the bottom of each plugin section in the following format: 

VPotLabeln=p,name

Where:

n = the number of the vpot
p = the number of the VST parameter whose label you which to override
name = the new label

e.g.

VPotLabel0=17,HiGain
VPotLabel1=18,HiFreq
M1VPotLabel2=19,Hi Q
 

Acknowledgements:
Thanks to the contributions of @msmcleod as well as forum member @azslow3 for fixes to the Mackie control DLL in our opensource GitHub project.
 

EXAMPLE: New Mackie Control options.

Mackie Control enhancements.gif

 

Improved audio dropout diagnosis

Dropouts can occur for a variety of reasons, not just CPU load. We’ve added useful information to help you diagnose the cause of a dropout. When a dropout occurs, playback stops and a toast notification will show the detected dropout reason code. This code can be useful in tracking down the reason for dropouts.

image.png

Below are some of the most common dropout reason codes along with potential preventative action that may be taken:

Code  Reason for dropout Potential preventative action
0

Unknown error or no dropout

 

1

Audio processing took longer than the buffers allotted timeslice

Increase the Buffer Size value in Edit > Preferences > Audio - Driver Settings.

2

Buffer underrun while processing or error writing record buffers

Possible CPU overload or driver malfunction. Increase latency and check disk status.

3

WDM/MME/WASAPI drivers audio buffers not delivered for over DropoutMsec milliseconds

Increase the DropoutMsec variable value in AUD.ini, which lets you configure the tolerance time in milliseconds before dropping if the audio pump mechanism becomes starved (default is 250 ms).

4

WDM/MME/WASAPI output buffer not available for delivery to audio device

Increase the Buffers in Playback Queue value in Edit > Preferences > Audio - Driver Settings.

5

Disk reading overloaded and could not keep up with playback pump

Increase the Playback I/O Buffer Size value in Edit > Preferences > Audio - Sync and Caching.

6

[Internal] Error filling disk playback buffer cache

Disk may be full condition or disk read error. Check disk status.

7

[Internal] Error reading from disk playback buffer cache

Possible memory corruption. Close and restart the application then reload the project.

8

Disk write error

Disk full or error writing record wave files. Free up some disk space.

9

Sequencer MIDI pump underrun

Increase the Prepare using n Millisecond Buffers value in Edit > Preferences > MIDI - Playback and Recording.

10

[Internal] Audio pump frequency problem

 

11

[Internal] Unexpected error while processing audio buffer

Try saving then closing and reopening the project.

12

[Internal] Internal audio buffer memory limit overflow

Contact support with recipe/project file.

13

ASIO subsystem signaled a dropout due to a state change

Don’t make changes to ASIO driver during playback. Another app may be using driver.

14

[Internal] WASAPI ReadDataBuffer timed out

WASAPI device error - restart device or close other applications using it.

15

[Internal] WASAPI buffer underrun

WASAPI device error - restart device or close other applications using it.

16

[Internal] WASAPI Read/Write buffer failed

WASAPI device error - restart device or close other applications using it.

17

WASAPI device removed or unavailable

The device was unplugged. Re-attach device.

Note: Dropout reason codes can be used for better diagnostics. Please contact Cakewalk Support and mention the dropout code if you are experiencing persistent audio engine dropouts that you are unable to remedy on your own.

For more information about dropouts, click here.
 

Live performance enhancements

This release includes a few enhancements that can be helpful when using Cakewalk in a live performance.


Option for Play List to close projects regardless of project changes

When using the Play List, the new File > Discard Project Changes During Playback option allows the Play List to automatically discard any changes before loading the next song. This lets you make minor temporary changes during playback, such as adjusting levels, without being prompted to save the changes before loading the next song. During playback, the Play List will ignore a project's modified state and close without saving. This option is enabled by default.

Note: This option is only active during (Play List) playback. Cakewalk will always prompt to save a modified project if playback is stopped.

image.png

 

Option for Play List to preload the next song during playback

By default, the Play List loads the next song while the current song is playing. While this can save time before the next project starts playing, it may cause glitches when loading large complex projects projects during playback.

To defer loading the next song until playback of the current song has finished, disable the File > Preload Next Song During Playback option.

 

Automatically stop/pause playback with MCI MIDI events

You can instruct Cakewalk to stop or pause playback at a defined moment, so you can start playback again manually. This can be very useful in a live setting.

This is done by inserting an MCI Command event in a MIDI track’s Event List view (ALT+8), and assigning the MCI Commands value to either stop or pause:

stop  - stops the transport and returns to zero
pause - pauses the transport allowing you to manually continue playback from where you left off

Press Play (SPACEBAR) manually to resume playback.

image.png

 

Improved compatibility with older SONAR WRK files

We continue to improve backwards compatibility with older Cakewalk products. Older SONAR .WRK files that contain automation or reference MCI audio events will now load properly in Cakewalk.

 

Previous release:

2019.07 Feature Overview

 

  • Like 5
  • Thanks 10

Share this post


Link to post
Share on other sites

I think I'm going to most appreciate CTRL-D, Drop out diags and PRV note names most. I'm looking forward to using this version.

Thank you.

Share this post


Link to post
Share on other sites

Thanks for this.

Maybe these feature overviews should be moved to Tutorials once a new version of CbB is released and cataloged in a sticky so they are easier to find over time.

 

  • Like 1
  • Great Idea 2

Share this post


Link to post
Share on other sites

Wow! This is another huge update. You guys working OT up there!! : )

Share this post


Link to post
Share on other sites

Wow, that's a lot of changes! The codes for dropouts should be really helpful for people. I'm also glad to see the VST3 program change support and take lane improvements.

  • Like 2

Share this post


Link to post
Share on other sites

After getting my head back around cakewalk after a long Absence to studio one, I am seriously considering coming back for my next song and seeing how things feel now.  Between the last update and this one, there are a lot of things that appeal to me.

  • Like 1

Share this post


Link to post
Share on other sites
10 hours ago, Noel Borthwick said:

Note event in the Piano Roll view can optionally show note names (pitch or custom note names from instrument definitions)

This is most brilliant. Will it include names from drum map definitions?

Share this post


Link to post
Share on other sites

This is again a great release after the 2019.07. There are so many fixes and features I like that I pass on listing my favorites! 😄

Many thanks, Bakers!

  • Like 1

Share this post


Link to post
Share on other sites
Posted (edited)

Showing dropout codes as a tool to empower users to problem-solve (including reporting the code for support if they cannot remedy it themselves) is brilliant! Is there a preferred place to report what might fall under "unknown" reasons?  For example, a week or two ago , I uncovered circumstances that seem to consistently cause audio dropouts.  I didn't ask for help because (1) it falls under "user error" (IMO) and (2) I know the user-error cause , how to avoid it, and how to undo it if I forget and do it again.

I don't think its a bug in the software, though telling users "Hey, this is what you did; the dropout will happen again if you make the same mistake" politely with an error code might be helpful.

UPDATE: The online doc (dropout codes) for 2019-09 opened in my browser when I clicked "Help" in the lower right corner. NICE!!!!

 

image.png

Edited by MusicMan11712 (aka Dr. Steve)
to add "if they cannot remedy it themselves"
  • Like 1

Share this post


Link to post
Share on other sites

This is another great update. Thank you Bakers!

Is Cakewalk ready now?

  • Like 1

Share this post


Link to post
Share on other sites

Hello, first post here!

Unfortunately to report that the new W (rewind) behavior is freezing / crashing Sonar each and every time I double tap it to go in the beginning of my project.  This is happening on an existing project with a video file open for scoring purposes. Removing the video fixes the problem.

Is there a way to revert RTZ back the way it functioned before?

Thank you for your continuous effort!

 

Share this post


Link to post
Share on other sites

Another big production. Thanks a lot für your tremendous work. Since Cakewalk is better than ever it's a real pleasure to work with.

Yeah, the best things in life are free 😋🤗😎🍻 

  • Haha 1

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×
×
  • Create New...