ZincT

18 hours ago, Kurre said:

I got a bit curious about jamstix and tried to install the free version. Didn't work.

I run the installer/manager with admin rights. Didn't work.

I'm not gonna waste more time on it but is curious about if any one else got it to work with CbB.

Have a nice day.

I have the full version of Jamstix but I get a lot of problems with BitDefender thinking Jamstix Manager is Ransomware and blocking it.

I don't know if you use BD but if so that might be the issue.  Try adding an exception to Ransomware Remediation (works ok for me until the next update of Jamstix Mgr grrr).

I used to use Kaspersky without any issues but moved to BD after all the scare about using Russian software. Anyway, I am so fed up with all of the false positives from BD that I have just purchased a Kaspersky license and plan to move back to it once my BD license expires.
 

The official post on the forum is up now...

33 minutes ago, Grem said:

That's an awfully big list!!

I think most of it applies to the initial 2019.09 build Grem.

The new update is Build 25.09.0.68 hotfix so I assume only this part applies...

Build 25.09.0.68 hotfix

New Options > Click Behavior > Transport Seeking Stops Playback option, which specifies if playback should stop when changing the timeline position during playback

U-He plug-ins crash on opening projects in version 2019.09

Waveform preview draws unexpectedly in version 2019.09

Bus waveform preview could stop drawing when hidden buses are present

Can no longer open Piano Roll view by double-clicking a selected MIDI clip

Fast consecutive seeking on timeline can cause hang with projects that contain video

Envelopes are not being moved with comp clip, but are removed instead

Metronome count-in throws off timekeeping in VST plug-ins like EZdrummer

Crash when switching between effects and instruments in the Plug-in Browser if plug-ins are removed from the active layout in Cakewalk Plug-in Manager

Plug-in Browser doesn't always reflect changes made in the Cakewalk Plug-in Manager

Crash when dragging Loop Start marker past 1:01:000 with Snap to Grid disabled

Quick grouping should be disabled if there is no track selection

Incorrect track strip control layout in Console view when WAI Display is enabled

Numerous issues with clip context Crossfade menus

Selected channel strips widen unexpectedly in the Console view if ProChannel display states aren't uniform

Data is not imported to the selected Take lane when imported via the Clips pane context menu

Importing audio to a Take lane resets the current lane focus to the topmost lane

Improved dropout reason code reporting

Restored many missing 'Learn More' buttons in the Help Module

Thanks Larry. 

All updated no problems (hotfix 68) and I'm still getting the super fast startup that the first 2019.09 build introduced for me (used to take around 1 minute to start and now takes 3 seconds).

On 10/5/2019 at 12:07 PM, mcmd said:

Wow...those free Exp Audio verbs we got are good! 

2 hours ago, ensonced said:

Finally got a chance to give them a little run through, and I agree, certainly nothing to sneeze at.

Agreed, very impressive. No wonder they normally cost so much. Very deep and loads of tweakability.

Found these video reviews useful...

https://youtu.be/P6SypKXF7zs

https://youtu.be/bwARuLeEZ_o

Thanks Larry.

Tempted by the Phaser as I missed it when it was on sale before and it's a recreation of a studio classic.

https://www.youtube.com/watch?v=EGRsOJ9lTCE

Any thoughts from any owners? 

19 hours ago, cclarry said:

Took 1 day DA...I ordered, registered, and redeemed, and when the
Groove 3 code didn't show up, I emailed Izotope...got the response
the next day.

Same for me Larry. I emailed iZotope yesterday about the missing Groove3 and Melodyne serials and they emailed them to me today.

My iZotope login is also working again today. 🤔

Amazing deal despite the hassle getting all the serials. Now to check out Eli Krantzberg's take on O9A...

8 hours ago, kitekrazy said:

These plugins are crap.   I'm trying to find which one of my DAWs will scan these without crashes.   If it fails in Reaper  then it will fail in most DAWs.  I do believe these were free at one time and they were still crap.

8 hours ago, Matthew Sorrels said:

Pretty much this.

I haven't installed these yet so thanks for saving me the bother of doing so.

Let's hope it's not a sign of things to come for the plugin collective.

I have to say that Recordingsoftware have been very helpful in trying to resolve these issues which seem to result from iZotope not being fully geared up for release.

Anyway, Recordingsoftware just sent me an email with a workaround to obtain R4 and Nimbus. Just a heads up to anyone else who receives these...ignore the instructions to register them on the iZotope product portal. These are iLok Manager serials so use that instead and they will work fine. 🤦🏻‍♂️

Now all I need to sort out is redeeming the Groove3 and Melodyne licenses but I haven't heard back from iZotope yet. 

8 minutes ago, cclarry said:

My iLok Licenses where in the email I got from JRR.  There were 3 Serial #'s
Nimbus, R4, and MPS3.  Then using the MPS3 serial # you got to Izotope and
redeem the Serial #, which gives you Melodyne and the Groove 3 Pass...but the
Groove 3 passes aren't showing up...

Thanks for the information Larry. I only received the MPS 3 serial so I will get back to Recordingsoftware about the Nimbus/R4 serials.

Did you receive yours @mcmd ?

How did you get Nimbus and R4? They don't appear on the portal.

I found a download link here --> https://www.izotope.com/en/products/downloads/suites.html

...but I suspect they will require authorisation and I haven't received any other serials.

It's all very shambolic on iZotope's part; like they weren't properly geared up for launch but were in a hurry to do so before we spent our money on imminent BF deals 🤦🏻‍♂️ Oh well, here goes another email to iZotope support.

Feel for you guys who paid more yesterday (been there, done that before). 😒

29 minutes ago, mcmd said:

Thanks! Got the SN immediately!

Same here, thanks @Tomgu   

Update: O9A installed and authorised okay but I cannot get the Melodyne or the Groove3 thing to work (probably because of below..).

I notice that they have updated their website look and feel but now I cannot login using my existing username and password (worked yesterday). After resetting the password it still won't let me login so I have sent a support email.

9 minutes ago, cclarry said:

If you have MPS 2.1 you'd be crazy not to buy this!

It's like paying for Groove3 1 year sub and everything else is free!

They emailed me a $25 voucher yesterday and another one today. The email gives the impression you can only use today's voucher.

Today's email said... 

A New $25 Code For You!
As some of our users have experienced issues with the limited $25 codes we sent out earlier this week, we have decided to send everybody a new $25 code today!

29 minutes ago, RSMcGuitar said:

UJAM offer is available from the 5th September till 7th November.

 

Ah OK, didn't know they overlapped offers.

Thanks Jude77.

That Odd-Time one also looks interesting and is also $9.

Thanks Mesh,

Looks pretty good as an all in one plugin. 

There's a downloadable demo here --> https://shop.audified.com/products/tonespot-electric-pro 

8 minutes ago, cclarry said:

Oddly enough...it's in my acccount...when all the others have not been...
not that I'm complaining...LOL

Lol, and it's still showing the UJAM offer under the "View This month's Offer" button.

I guess they are in the process of updating.

I was able to order the Ambient Tools anyway and have now received the download link 👍🏻

I notice the three plugins are available for both OSX and Windows for anyone with MACs (Fleer).

Thanks Larry.

I just logged into my Focusrite account and it's also live there under https://customer.focusrite.com/my-software 

On 10/1/2019 at 10:56 PM, Fleer said:

Any reactions to v4.0.8?

What’s the buzz?

2 hours ago, abacab said:

I think SampleTank 4 may finally be ready for general release!

Yup, all seems good here! Thanks for the heads-up Ryan 👍🏻

Thanks Larry and abacab.

Managed to transfer Liquid Notes OK.

8 minutes ago, jerrydf said:

<sulk>

jrr says upgrade is not available in my country (UK)

I blame Brexit

 

Brexit!...don't get me started...🙃

Same here 😡 I never understand why they don't make upgrade offers based on what you own. I also get constant email offers for stuff I already own. 

They may be world leaders in music production but I think it's time they hired someone to sort out this side of their business. 

I also had Tonal Balance Control 2 appear after the update.

Will have to replace TBC1 with it in my default template.

See above.

Lots of great features, optimisations and bug fixes in this one.

Wow, it also opens way faster for me now.

Thanks Meng, Noel, bakers and everyone involved in improving our magnificent DAW. 👍🏻