Heinz Hupfer Posted December 7, 2019 Share Posted December 7, 2019 HI:) From the Reference Manual: ================================================= Working with track templates You can create an unlimited number of track templates for quickly recalling your most often used track settings including the following: Track type (MIDI or Audio) Mute, Solo and Record state Hardware input Output destination Bus send settings Track parameters Track icons Effects and their settings Instrument and Bank/Patch Track name Mix Scenes Patch points ================================================= Mix Scenes are not saved with Track Templates, doesn't matter if you save them with "whole project" or "selected tracks" I worked with mixscenes years ago I think, perhaps the bakers delete this for any purposes..... If so, I would like to have this feature back:) Can someone confirm? Also the Drag and drop mixscenes into a new project doesn't recall ProChannel settings like EQ or Comp! Can anybody confirm this too? Thanks a lot;) Bassman. 1 Link to comment Share on other sites More sharing options...
Noel Borthwick Posted December 7, 2019 Share Posted December 7, 2019 We'll investigate this - thanks. 1 Link to comment Share on other sites More sharing options...
Heinz Hupfer Posted December 8, 2019 Author Share Posted December 8, 2019 @Noel Thank you;) Bassman 1 Link to comment Share on other sites More sharing options...
Noel Borthwick Posted December 11, 2019 Share Posted December 11, 2019 @Heinz Hupfer we investigated this. I think you may be confusing project templates with track templates. Mix scenes do indeed save properly with project templates. Track templates on the other hand do not save mix scenes. Link to comment Share on other sites More sharing options...
Heinz Hupfer Posted December 11, 2019 Author Share Posted December 11, 2019 (edited) Hi ? @Noel Borthwick Ecactly what I meant, but as you can see in my first post, I have copied this out of the reference guide: On page 288 in the reference guide after "working with track templates " the mixscenes are listed ! Also Effects and their settings. So I thought this should be possible ? Bassman. Edited December 11, 2019 by Heinz Hupfer Link to comment Share on other sites More sharing options...
David Baay Posted December 11, 2019 Share Posted December 11, 2019 Looks like a simple doc bug. I can't see that it would be possible to load a mix scene with a track template into a project structure that didn't match the mix scene. Link to comment Share on other sites More sharing options...
Noel Borthwick Posted December 11, 2019 Share Posted December 11, 2019 @Heinz Hupfer you said it worked before - hence my response. We'll fix the documentation, thanks. Effects settings should be saved in track templates. Those do not have anything to do with mix scenes. >>Also the Drag and drop mixscenes into a new project doesn't recall ProChannel settings like EQ or Comp! Keep in mind that mix scenes are tied to the project that they originated from. If you drag and drop into a project that was not derived from the same project there is no guarantee that the settings will be recalled because the track ID's may be different. However if you drag a scene into a project that was saved from a version of the original project it should recall fine. In the future we may allow importing scenes from other projects and allowing you to match settings from tracks and buses. 1 Link to comment Share on other sites More sharing options...
Heinz Hupfer Posted December 12, 2019 Author Share Posted December 12, 2019 @Noel Borthwick >>>Keep in mind that mix scenes are tied to the project that they originated from. If you drag and drop into a project that was not derived from the same project there is >>>no guarantee that the settings will be recalled because the track ID's may be different. However if you drag a scene into a project that was saved from a version of the >>>original project it should recall fine. I tried with a project just renamed and deleted several Prochannel Settings. I couldn't get drag EQ and Comp settings to work. But it's not a big problem, cause of the possibility to save Prochannel Presets. Drag and Drop would be much faster in the other way. ProChannel Presets cannot be dragged:( Or is it just me again? Would be very nice:) Thanks to you Noel:) Bassman. Link to comment Share on other sites More sharing options...
martsave martin s Posted December 14, 2019 Share Posted December 14, 2019 On 12/7/2019 at 7:09 AM, Heinz Hupfer said: Also the Drag and drop mixscenes into a new project how do i do this?? pls Link to comment Share on other sites More sharing options...
Heinz Hupfer Posted December 14, 2019 Author Share Posted December 14, 2019 @martsave martin s Mark all tracks you want to save mixscences for and save it (you have to deselect "whole project" in the MS settings. In the new project mark the tracks and per Browser drag the saved mixscene on one of these tracks. But for me it doesn' work for Prochannel settings. Please try it and let me know.... Bassman. Link to comment Share on other sites More sharing options...
martsave martin s Posted December 14, 2019 Share Posted December 14, 2019 29 minutes ago, Heinz Hupfer said: per Browser drag the saved mixscene where in the Brower?? Link to comment Share on other sites More sharing options...
Heinz Hupfer Posted December 14, 2019 Author Share Posted December 14, 2019 ..Project files..\..your project..\Mixscenes the same dir where the Audio dir from the project is located. Link to comment Share on other sites More sharing options...
martsave martin s Posted December 14, 2019 Share Posted December 14, 2019 ok i will experiment and get back to you.. thank you Hienz Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now