David Baay Posted April 27, 2022 Share Posted April 27, 2022 (edited) On 4/27/2022 at 10:05 PM, Release said: I only have parts 3-6 in the IK Product Manager folder which also means that any preset below the letter "F" is missing and I get errors trying to open. Expand I have seen that happen previously with a Syntronik 1 synth. I ended up just manually copying the missing folders from the extracted installation files to the samples directory. Worked fine. EDIT: on re-reading I see the issue is not just that the files weren't installed, but that they weren't even downloaded. In that case you can download the missing parts from the IK website, extract them, and run the installer. Edited April 27, 2022 by David Baay Link to comment Share on other sites More sharing options...
Release Posted April 27, 2022 Share Posted April 27, 2022 Thanks! That worked. I didn’t even realize they had the installers on the website. Link to comment Share on other sites More sharing options...
Guest Posted April 28, 2022 Share Posted April 28, 2022 (edited) (removing acct) Edited October 24, 2024 by Guest Link to comment Share on other sites More sharing options...
David Baay Posted April 28, 2022 Share Posted April 28, 2022 On 4/28/2022 at 1:25 PM, mister_tea said: is the 16 based on 1/3 of the purchase price? In case your thought process is the same as mine on some of these promotions, I sometimes mentally calculate 1/3 but the JamPoints actually cap at 30%. They're even rounding the other direction a tiny bit since 30% of $49.99 is 14.997 points. Expand Yes, I was making that mistake - cleared up a few posts later. Link to comment Share on other sites More sharing options...
Peter - IK Multimedia Posted April 28, 2022 Share Posted April 28, 2022 On 4/27/2022 at 10:05 PM, Release said: If anyone picked up the Syner-V synth, can you do ma a favor and check to see if the installer actually installed Parts 1 and 2? I only have parts 3-6 in the IK Product Manager folder which also means that any preset below the letter "F" is missing and I get errors trying to open. I've reinstalled twice and it's no different. Expand On 4/27/2022 at 11:02 PM, David Baay said: I have seen that happen previously with a Syntronik 1 synth. I ended up just manually copying the missing folders from the extracted installation files to the samples directory. Worked fine. EDIT: on re-reading I see the issue is not just that the files weren't installed, but that they weren't even downloaded. In that case you can download the missing parts from the IK website, extract them, and run the installer. Expand There was definitely a Syner-V installer issue but the team fixed it this morning (Italian time), I just verified with our Testing Manager. He's running through the rest to make sure all is good there though we haven't had reports of other installers with similar issues. On 4/28/2022 at 2:42 PM, David Baay said: Yes, I was making that mistake - cleared up a few posts later. Expand Sorry we keep pouring the salt into your math wound! ? 1 Link to comment Share on other sites More sharing options...
David Baay Posted April 28, 2022 Share Posted April 28, 2022 On 4/28/2022 at 3:28 PM, Peter - IK Multimedia said: There was definitely a Syner-V installer issue but the team fixed it this morning (Italian time), I just verified with our Testing Manager. He's running through the rest to make sure all is good there though we haven't had reports of other installers with similar issues. Expand Cool. I thought it might just be glitch due to the high volume of downloads during the GB. I did the Syner-V installation shortly after the problem was mentioned and just the first part was missed. Downloading and installing manually fixed it. Link to comment Share on other sites More sharing options...
User 905133 Posted April 28, 2022 Share Posted April 28, 2022 Not sure this tour of SYN2 by Erik Norlander has been posted here before. If so, here it is again. Warning: Its over an hour long! 2 Link to comment Share on other sites More sharing options...
abacab Posted April 28, 2022 Share Posted April 28, 2022 Link to comment Share on other sites More sharing options...
abacab Posted April 28, 2022 Share Posted April 28, 2022 Link to comment Share on other sites More sharing options...
abacab Posted April 28, 2022 Share Posted April 28, 2022 Link to comment Share on other sites More sharing options...
Peter - IK Multimedia Posted April 28, 2022 Share Posted April 28, 2022 Thanks to @User 905133 and @abacabfor posting the videos, I appreciate it. Three heavy hitters there, I get to listen to Erik talk about our instruments once a week and it is a highlight even if it is a work meeting. 4 Link to comment Share on other sites More sharing options...
abacab Posted April 28, 2022 Share Posted April 28, 2022 On 4/28/2022 at 5:08 PM, User 905133 said: Not sure this tour of SYN2 by Erik Norlander has been posted here before. If so, here it is again. Warning: Its over an hour long! Expand At the 8:28 mm:ss mark until 30:00 mm:ss, Erik dives in to the details of the Edit page, including wave sets, sub-oscillators, drift, and the mod matrix. Good explanations! 1 1 Link to comment Share on other sites More sharing options...
User 905133 Posted April 28, 2022 Share Posted April 28, 2022 (edited) On 4/28/2022 at 7:24 PM, abacab said: At the 8:28 mm:ss mark until 30:00 mm:ss, Erik dives in to the details of the Edit page, including wave sets, sub-oscillators, drift, and the mod matrix. Good explanations! Expand Yup!! Unfortunately, some of the synth audio is distorted at times, but I found the detailed SYN2 explanations and the history/design of the synths were outstanding, well-worth sticking through the video to get past the distortion. Fortunately, the audio of his talking was totally clear. Edited April 28, 2022 by User 905133 Link to comment Share on other sites More sharing options...
Doug Rintoul Posted April 28, 2022 Share Posted April 28, 2022 On 4/28/2022 at 7:24 PM, abacab said: At the 8:28 mm:ss mark until 30:00 mm:ss, Erik dives in to the details of the Edit page, including wave sets, sub-oscillators, drift, and the mod matrix. Good explanations! Expand After watching this, I now have some questions, @Peter - IK Multimedia. There is stuff in the Edit panel that is not WaveSet related like the Modulation Matrix and the filters. Could not the legacy synth presets use those feature since they are not WaveSet dependant? 1 Link to comment Share on other sites More sharing options...
abacab Posted April 28, 2022 Share Posted April 28, 2022 On 4/28/2022 at 9:22 PM, Doug Rintoul said: After watching this, I now have some questions, @Peter - IK Multimedia. There is stuff in the Edit panel that is not WaveSet related like the Modulation Matrix and the filters. Could not the legacy synth presets use those feature since they are not WaveSet dependant? Expand Interesting idea, but not how it works today. That would likely require a feature request. If there is some underlying code they could just switch on, that would be great! Link to comment Share on other sites More sharing options...
abacab Posted April 29, 2022 Share Posted April 29, 2022 9 free products now!!! Link to comment Share on other sites More sharing options...
abacab Posted April 29, 2022 Share Posted April 29, 2022 Only 98 more to go till 10 free!!! ? Link to comment Share on other sites More sharing options...
Doug Rintoul Posted April 29, 2022 Share Posted April 29, 2022 On 4/29/2022 at 8:07 PM, abacab said: Only 98 more to go till 10 free!!! ? Expand I predict Sunday... 1 Link to comment Share on other sites More sharing options...
abacab Posted April 29, 2022 Share Posted April 29, 2022 On 4/29/2022 at 8:32 PM, Doug Rintoul said: I predict Sunday... Expand 91 more... Link to comment Share on other sites More sharing options...
telecode 101 Posted April 30, 2022 Share Posted April 30, 2022 still looking at this one. its tempting. i have been using SampleTank and Syntronic quite a bit lately. Really enjoy using them. The only thing turning me off IKM is the expired downloads. Its really annoying. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now