Noel Borthwick Posted September 10, 2021 Share Posted September 10, 2021 @Will_Kaydo and anyone else using aux tracks or sidechains please try out the new export capability in build 123 and report back with your findings. There may be a few boundary cases to tackle but this should handle the most common use case of needing to export stems from sidechain tracks or aux tracks. 3 1 Link to comment Share on other sites More sharing options...
Will. Posted September 10, 2021 Share Posted September 10, 2021 On it right now. ☺ Link to comment Share on other sites More sharing options...
Terry Kelley Posted September 11, 2021 Share Posted September 11, 2021 (edited) 123? I'm still testing 099! "Cakewalk is pleased to announce ... YOU HAVE MORE WORK TO DO SO GET TO TESTING PEOPLE!" Edited September 11, 2021 by Terry Kelley 3 Link to comment Share on other sites More sharing options...
Johnny Thorn Posted September 11, 2021 Share Posted September 11, 2021 After installing the release Cakewalk_by_BandLab_Update_Setup_27.09.0.120(Rebuild_2) and opening or creating a file, the transport plays for about 100ms and stops and returns to the starting position. No error message, no dropout message. Same behavior for any file, any audio or midi. new or existing. I can not revert to the previous version as the error says the build is not present. Please help Link to comment Share on other sites More sharing options...
Andres Medina Posted September 11, 2021 Share Posted September 11, 2021 (edited) I found issues with the Export Audio functions, that were not present in previous build: The "Time Selection Range" is not working. To reproduce: Select an audio clip Initiate Export Audio Select Tracks Through Entire Mix in Source Category Select Time Selection on "Range" The selection on the track pane changes to entire project, which is wrong, and the audio is exported following this mistaken selection. UPDATE: also, before this build, the selection of a particular clip(s) on the track pane automatically selected the corresponding track(s) and the time region on the export dialog. In this build none of this happens. Edited September 11, 2021 by Andres Medina UPDATE 1 Link to comment Share on other sites More sharing options...
Andres Medina Posted September 11, 2021 Share Posted September 11, 2021 Another thing: saving a preset in the export audio dialog does not save the Range selection, as before. Link to comment Share on other sites More sharing options...
Noel Borthwick Posted September 11, 2021 Share Posted September 11, 2021 We'll look into it thanks 1 Link to comment Share on other sites More sharing options...
Andres Medina Posted September 11, 2021 Share Posted September 11, 2021 Thanks! Noel, how do I revert to previous build, not 2021.06 ... just run the installer? Link to comment Share on other sites More sharing options...
Noel Borthwick Posted September 11, 2021 Share Posted September 11, 2021 Yes if you have the old installer you can Link to comment Share on other sites More sharing options...
Andres Medina Posted September 11, 2021 Share Posted September 11, 2021 Ok. Yes, I do. Link to comment Share on other sites More sharing options...
buildanax Posted September 11, 2021 Share Posted September 11, 2021 I just downloaded the 2021.09 early release and have encountered something that I am not sure about. When attempting to export a file using the new "Export Audio" page, when I go to "Choose Export Location" and choose the designated folder that I want to export to, I notice that none of the files that are currently in that folder are showing up. It just says "No items match your search". Is this a settings issues or am I missing something? Prior to the update I could always see the other files in the folder which was essential in order to make sure I am not duplicating something. I can go to the regular Windows File Explorer and see what is in the folder but that is inconvenient when I am used to automatically being able to see that information during the exporting process. Anyone else noticing this or having this issue? Danny C. Link to comment Share on other sites More sharing options...
Will. Posted September 11, 2021 Share Posted September 11, 2021 (edited) ? What!? The excitement that is sitting on my face right now for what I just did with a few test and the results I got from it? Heaven! 12 hours ago, Noel Borthwick said: There may be a few boundary cases So far from my small test, I doubt there is any boundary limitations with the sidechain side in this update. Sidechain with tracks works perfectly (More feedback within the next 48hrs.) Just to make it clear to others, I've attached a video to show how this works. It is slightly different than how its done with buses. I dont know if anyone else is aware of what this update brings in the flexibility with sidechain as of this EA. If you could just read my mind right now . . . @Noel Borthwick and the team literally broke cakewalk's limitations within its creativity realm - wide open. The things you can do now without plugins - endless! I thank you Noel and Team. Amazing.mp4 Edited September 11, 2021 by Will_Kaydo 3 1 Link to comment Share on other sites More sharing options...
Noel Borthwick Posted September 11, 2021 Share Posted September 11, 2021 These are the different routing examples that I tested. It should automatically evaluate dependencies and add them when bouncing a single track with other tracks sourcing that track. Same applies to soloing the track in question. 2 Link to comment Share on other sites More sharing options...
Noel Borthwick Posted September 11, 2021 Share Posted September 11, 2021 1 hour ago, buildanax said: I just downloaded the 2021.09 early release and have encountered something that I am not sure about. When attempting to export a file using the new "Export Audio" page, when I go to "Choose Export Location" and choose the designated folder that I want to export to, I notice that none of the files that are currently in that folder are showing up. It just says "No items match your search". Is this a settings issues or am I missing something? Prior to the update I could always see the other files in the folder which was essential in order to make sure I am not duplicating something. I can go to the regular Windows File Explorer and see what is in the folder but that is inconvenient when I am used to automatically being able to see that information during the exporting process. Anyone else noticing this or having this issue? Danny C. You opening the folder browser. What you want is the file browser. Link to comment Share on other sites More sharing options...
Noel Borthwick Posted September 11, 2021 Share Posted September 11, 2021 1 hour ago, buildanax said: I just downloaded the 2021.09 early release and have encountered something that I am not sure about. When attempting to export a file using the new "Export Audio" page, when I go to "Choose Export Location" and choose the designated folder that I want to export to, I notice that none of the files that are currently in that folder are showing up. It just says "No items match your search". Is this a settings issues or am I missing something? Prior to the update I could always see the other files in the folder which was essential in order to make sure I am not duplicating something. I can go to the regular Windows File Explorer and see what is in the folder but that is inconvenient when I am used to automatically being able to see that information during the exporting process. Anyone else noticing this or having this issue? Danny C. @buildanax you most likely have a bad install or something failed during install. Please download the installer and run it again. Also if you got that message when rolling back you ran the wrong rollback installer. Instructions are in the first post in this thread. Link to comment Share on other sites More sharing options...
chris.r Posted September 11, 2021 Share Posted September 11, 2021 3 hours ago, Will_Kaydo said: Just to make it clear to the others Ive attached a video to show how this works. It is slightly different than how its done with buses. Cool. Wish we could bounce audio like this by just dragging the MIDI clip onto audio track or a sampler pad, skipping the whole interrupting dialog window step. Link to comment Share on other sites More sharing options...
Emiliano Branda Posted September 11, 2021 Share Posted September 11, 2021 again no Staff View improvement....... so sad..... CW will be the best DAW when the Staff View will be improved..... for me it is always the best, even without these improvements, but ..... ? Link to comment Share on other sites More sharing options...
SaGaD Xamun Posted September 11, 2021 Share Posted September 11, 2021 (edited) 11 hours ago, Noel Borthwick said: @SaGaD Xamun can you please provide the audio file that you used to do the detection with? You can zip it and attach here or if large upload it to a file share and put the link here. This is the link to my favorite audio reference file https: Reference : www.soundcloud.com/roosari-abi/khatereh-hossein-alizadeh You may be wondering why I want to use audio Snap? Well, the steps I want to do are, after finding the tempo, I quantize the file and cut it into pieces, and after applying the Glitch and effects I want, I produce new music, composite music. This link below is the same reference file I wanted that I reproduced last month with earlier versions of cakewalk reproduced last month : www.soundcloud.com/karimkhan-ir/the-wind-x-hossein-alizadeh-karimkhanir-free-beat Hossein Alizadeh - Khatereh - 320 - RadioAva.Com_490_.rar Edited September 11, 2021 by SaGaD Xamun Link to comment Share on other sites More sharing options...
whinnerah Posted September 11, 2021 Share Posted September 11, 2021 I've just downloaded the latest installer and still haven't got the export presets, even after starting Cakewalk when holding down Ctrl...... Link to comment Share on other sites More sharing options...
GreenLight Posted September 11, 2021 Share Posted September 11, 2021 6 hours ago, Noel Borthwick said: These are the different routing examples that I tested. It should automatically evaluate dependencies and add them when bouncing a single track with other tracks sourcing that track. Same applies to soloing the track in question. Wow, this gets me excited as well! ? It sounds almost too good, so I have to double-check: one doesn't have to include the side-chain source in the selection when using Bounce to Tracks anymore, it will be automatically calculated? It really improves workflow with sidechaining, great work Noel & Co! Link to comment Share on other sites More sharing options...
Recommended Posts