DeeringAmps Posted August 10, 2021 Share Posted August 10, 2021 I'm sure this is covered somewhere (but I'm a lazy bus-turd) and the thread is 9 pages now... If I buy MixBox can I choose ARC 3 (with the mic) as a freebie? Or, IIRC from last year, must "hardware" be your/my first choice? @cclarry and @Peter - IK Multimedia TIA t Link to comment Share on other sites More sharing options...
Larry Shelby Posted August 10, 2021 Author Share Posted August 10, 2021 (edited) 2 minutes ago, DeeringAmps said: I'm sure this is covered somewhere (but I'm a lazy bus-turd) and the thread is 9 pages now... If I buy MixBox can I choose ARC 3 (with the mic) as a freebie? Or, IIRC from last year, must "hardware" be your/my first choice? @cclarry and @Peter - IK Multimedia TIA t No..but if you buy Arc 3 with the Mems mic you can something $150 as the freebie! Hardware can only be used as the "Entry" product, and never as the freebie! Edited August 10, 2021 by cclarry 1 Link to comment Share on other sites More sharing options...
DeeringAmps Posted August 10, 2021 Share Posted August 10, 2021 Thanks Lars! Guess I'm "in" with ARC 3 then, got a mess o "whammy/jammy" points. Still lots of "goodies" that the $150 will buy... t I needed an excuse not to go MixBox anyway! 1 Link to comment Share on other sites More sharing options...
telecode 101 Posted August 10, 2021 Share Posted August 10, 2021 i am tempted by the arc w/ mic as well. the more i use tracks the more i like it. is it really of any use. my room is badly treated and i work around the inefficiencies... is this just a waste of money? Link to comment Share on other sites More sharing options...
DeeringAmps Posted August 10, 2021 Share Posted August 10, 2021 (edited) I bought ARC 1 way back when (2011, upgraded to ARC 2 in 2012). Have used it ever since. Many think its simply "magic dust", others swear by it. Again, its always on in my studio. The last update to ARC 2 was over 4 years ago, I'm off to make the buy I made the buy! t 19 minutes ago, telecode 101 said: is this just a waste of money? I hope not... Edited August 10, 2021 by DeeringAmps 1 Link to comment Share on other sites More sharing options...
telecode 101 Posted August 10, 2021 Share Posted August 10, 2021 13 hours ago, Doug Rintoul said: B&H Photo honored my purchase of Modo Drums SE so I am in at the $149.99 level. Yipee!!! good stuff. i am holding out for something in the $199 tier.. and I am in.. Link to comment Share on other sites More sharing options...
telecode 101 Posted August 10, 2021 Share Posted August 10, 2021 (edited) 3 minutes ago, DeeringAmps said: Again, its always on in my studio. yeah.. I dont even have a *****ing studio. 99% of my house is taken up by my wife and kids. I get a tiny corner in a garage.. ? Edited August 10, 2021 by telecode 101 1 Link to comment Share on other sites More sharing options...
Sander Verstraten Posted August 10, 2021 Share Posted August 10, 2021 Btw: Thomann.de got some Amplitube collections on sale: 1 Link to comment Share on other sites More sharing options...
DeeringAmps Posted August 10, 2021 Share Posted August 10, 2021 5 minutes ago, telecode 101 said: I get a tiny corner in a garage.. For years my "studio" was shared office space (a 12 x 14 bedroom) with my wife. We use the "tools" we have at hand. t 2 Link to comment Share on other sites More sharing options...
telecode 101 Posted August 10, 2021 Share Posted August 10, 2021 (edited) hmm.. this group buy is getting slow.. at this rate.. it looks like next freebie will be thursday or friday.. Edited August 10, 2021 by telecode 101 1 Link to comment Share on other sites More sharing options...
artturner Posted August 10, 2021 Share Posted August 10, 2021 Think I'm going to start with MixBox instead. Melda chose this week to put MSpectralDynamics on sale and I've been waiting a few months for that. Link to comment Share on other sites More sharing options...
Eusebio Rufian-Zilbermann Posted August 10, 2021 Share Posted August 10, 2021 @DeeringAmpsIf interested in Arc3 but also items in the $199 range (mixbox, etc), it's a little more expensive option but it may be effective getting into the GB with a $199 item, getting the software-only Arc3 as a freebie, and buying the microphone separately, e.g. https://www.ikmultimedia.com/products/arcmic/?pkey=mems-measurement-microphone-for-arc-system (minus jampoints, plus shipping). Btw, you mention having an older Arc already. Per the Arc3 manual, if you have an older Arc mic it is still supported in Arc3 (although the documentation does recommend the latest mems mic better than older arc mics or non-ik measurement mics) 2 1 Link to comment Share on other sites More sharing options...
Bapu Posted August 10, 2021 Share Posted August 10, 2021 On 8/9/2021 at 10:40 AM, Peter - IK Multimedia said: @Peter - IK Multimedia I want to buy AT5 in the Group buy as a gift. Can I transfer it to someone? And then what about the Freebies (such as collections I already own)? Can they be transferred or do I have to transfer my paid for versions? Link to comment Share on other sites More sharing options...
Larry Shelby Posted August 10, 2021 Author Share Posted August 10, 2021 6 minutes ago, Bapu said: @Peter - IK Multimedia I want to buy AT5 in the Group buy as a gift. Can I transfer it to someone? And then what about the Freebies (such as collections I already own)? Can they be transferred or do I have to transfer my paid for versions? If you buy Amplitube 5 in the group buy it will not be saleable/transferrable until after 90 days. And FREE Products from the Group Buy are NFR. Products you already own are "greyed out" on the list when you go to select your Freebie. So, the answer is mostly NO 1 Link to comment Share on other sites More sharing options...
chris.r Posted August 10, 2021 Share Posted August 10, 2021 (edited) 4 hours ago, Eusebio Rufian-Zilbermann said: ...it may be effective getting into the GB with a $199 item, getting the software-only Arc3 as a freebie, and buying the microphone separately Question to anybody who knows, for sure, whether the MEMS that come bundled with the ARC3 boxed are specially calibrated for use with the dedicated software? IOW if I buy the MEMS and the ARC3 software separately, do I loose that last extra step of polish like a bundled mic calibration? Edited August 10, 2021 by chris.r Link to comment Share on other sites More sharing options...
Fleer Posted August 10, 2021 Share Posted August 10, 2021 12 minutes ago, cclarry said: If you buy Amplitube 5 in the group buy it will not be saleable/transferrable until after 90 days. And FREE Products from the Group Buy are NFR. Products you already own are "greyed out" on the list when you go to select your Freebie. So, the answer is mostly NO Indeed. You can only sell the items you bought but definitely not the one you use to get into the Group Buy as you’ll then lose all your GB freebies. 1 Link to comment Share on other sites More sharing options...
Doug Rintoul Posted August 11, 2021 Share Posted August 11, 2021 31 minutes ago, chris.r said: Question to anybody who knows, for sure, whether the MEMS that come bundled with the ARC3 boxed are specially calibrated for use with the dedicated software? IOW if I buy the MEMS and the ARC3 software separately, do I loose that last extra step of polish like a bundled mic calibration? I don't think the MEMS is specific to the particular piece of software you download. The mic should come with a calibration file you load into ARC3. Note also that you do not need to use an IKM mic. ARC3 can use other measurement mics as well. 1 Link to comment Share on other sites More sharing options...
telecode 101 Posted August 11, 2021 Share Posted August 11, 2021 40 minutes ago, Fleer said: Indeed. You can only sell the items you bought but definitely not the one you use to get into the Group Buy as you’ll then lose all your GB freebies. that seems to make logical sense to me. other wise you will have a mass dumping on KVR of people reselling IKM stuff they got as freebies.. Link to comment Share on other sites More sharing options...
ALC Posted August 11, 2021 Share Posted August 11, 2021 53 minutes ago, Doug Rintoul said: I don't think the MEMS is specific to the particular piece of software you download. The mic should come with a calibration file you load into ARC3. Note also that you do not need to use an IKM mic. ARC3 can use other measurement mics as well. I believe the calibration is built into ARC3 given the consistency of the MEMS mics. Here’s an interesting read on the mics. https://audioxpress.com/article/fresh-from-the-bench-ik-multimedia-arc-2-5-mems-test-microphone 2 1 Link to comment Share on other sites More sharing options...
Mesh Posted August 11, 2021 Share Posted August 11, 2021 On the fence on getting A5 .....what's most likely going to happen 6 Link to comment Share on other sites More sharing options...
Recommended Posts