-
Posts
9,681 -
Joined
-
Last visited
-
Days Won
27
Posts posted by scook
-
-
2 hours ago, jfrommichigan said:
Wow. Sorry about the image size. I wasn't expecting to show up so... huge
The size is just fine.
More importantly, good job.
-
7 hours ago, Jordi said:
For some reason in audio settings windows, only can select 16 bits 48khz my Motu Ultralite.
That's OK, the bit setting in Windows does not affect the DAW.
7 hours ago, Jordi said:I don't understand about how i can configure the audio settings in windows to use Asio drivers,
There is no setting in Windows to select the driver. The driver selection is made by the program needing to talk to the device.
Most Windows programs do not use ASIO instead relying on native Windows drivers.
ASIO drivers are mostly used by audio and video tools. Some web browsers can use ASIO too.
The choice of driver, if there is one, is part of the program setup like it is in CbB.
-
The timing master drop down entries correspond to the currently selected devices in Preferences > Audio > Devices
-
Depending on how many times you need to do this it may be faster to
- setup the "master project" with all the basic FXs and buses then
- make as many copies of the "master project" folder as desired
- go into the new project folders and rename the cwp files as desired
- work the new projects
-
1
-
The message looks suspicious to me
McAfeer?
On the CbB side, it is normal for one ASIO driver to be enabled at a time. To change drivers, deselect BOTH the current input AND output settings THEN make new selections. Only one driver may be selected at a time.
-
2 hours ago, Lord Tim said:
On the rare occasions that I think "Ah crap, forgot a synth part" I'll go through and disable any effects that introduce latency until it's fine and back at the mix stage again.
Another approach if one has to record late in the process is
- bounce the project down to a scratch track
- archive everything except the scratch track (bypass FX on the master bus if any)
- record new stuff
once the recording is done
- unarchive all the working tracks/buses (enable FX on the master bus if any)
- archive or delete the scratch track
-
2
-
1
-
I would normally respond to this
6 minutes ago, fret walker said:I deselect the Realtek driver, hit apply, and it just reverts back to realtek.
Deselect both input and output in CbB Audio driver preferences BEFORE making a new selection.
But this
8 minutes ago, fret walker said:I've disabled drivers, uninstalled the realtek drivers, reinstalled Cakewalk, reinstalled the Presonus Universal Control with drivers, nothing works. I did see Presonus installer complained about McAfee firewall so I turned that off and turned off Windows Defender firewall and reinstalled. No luck.
Leads me to suspect a much bigger problem with system configuration.
Why would there ever be two firewalls running? One is enough to mess with installers.
-
Q1 "Save As" to a new folder with "Copy all audio with project" enabled will copy a project and audio to the new folder. For me it is, open the Save As dialog then
- Click the up-folder icon
- Give the project a name and
- Click Save.
Q2 see mix recall.
-
2
-
The delay is likely due to audio buffering.
The buffers you have control over are
- the Mixing Latency settings in Preference > Audio > Device Settings (or software supplied by the hardware manufacture) and
- Plug-in Delay Compensation - some plug-ins require time for processing. The DAW uses PDC to keep everything in sync. Toggle the FX button in the Mix Module. as a quick test for PDC induced latency. If bypassing FX noticeably reduces latency, then one or more plug-ins somewhere in the project are the cause. Usual suspects are dynamics processors and IR-based reverbs. Consider temporarily bypassing the plug-ins or replacing them with less resource intensive plug-ins during recording. Also review the PDC button page.
-
1
-
1
-
3 minutes ago, User 905133 said:
Separate sub-forums for Cakewalk Sonar and Cakewalk Next sounds like a great idea in theory, but that is no guarantee that people will post in the right sub-form.
it's a problem today
-
1
-
-
I am sure @Jesse Jost already has a plan
AFAIK Cakewalk has never had a beta rollout like Next
-
2
-
-
Did you update the image url?
I left the old url in there just in case .
-
1 minute ago, sjoens said:
Wondering how the help docs will be affected by the new Sonar releases?
Now you know
-
16 minutes ago, Jonathan Sasor said:
Okay, it should be working now, go ahead and give it another try.
CbB 2022.11 & 2021.12
SONAR 2017.10
SONAR X3
SONAR X2
all seem OK now
I no longer have MC installed
thanks
-
1
-
-
just received email from staff
they are working the issue
will keep you posted
-
2
-
-
yeah, web help looks broken ATM
-
I should have been clearer.
VST Reset is available and a good idea.
The sandbox and logging are not available in Platinum.
-
3 minutes ago, bitflipper said:
Open Preferences and go to File -> VST Settings.
1. Under the Scan Options section, click Reset
2. Check the Generate Scan Log option
3. Re-scan
If the instruments still aren't there, open the scan log with Notepad and search on their file names (e.g. keyscape.dll) and see if they are even mentioned. If not, then the appropriate folders are not included in your scan path. If they are mentioned, see if their initializations failed or succeeded.
These options are not available to the OP
7 hours ago, Raquel Cruz said:Yes, I'm using sonar platinum
unless they are willing to upgrade to CbB
-
Pretty sure clip fades were similar in X1
https://legacy.cakewalk.com/Documentation?product=Cakewalk&language=3&help=Arranging.69.html#1472327
-
1
-
-
In the future, please post requests like this in the Feedback Loop section of this forum.
Thanks
-
1
-
1
-
-
46 minutes ago, Codefreq said:
With the new Sonar coming out, assuming it is the spiritual successor to Cakewalk by Bandlab, would I still be able to access those old projects?
Yes
-
4
-
-
801 - Tomorrow Never Knows
-
2
-
1
-
-
15 minutes ago, HIBI said:
ACECORE.DLL is a library used by Microsoft Office
Thanks
The OP has a bad scan path defined in CbB Preference > File > VST Settings
If you need help cleaning up the scan path post an image your VST Settings
The scan path should only contain paths with VST2 and VST3 plug-ins.
Every folder in the scan path is searched for plug-ins not just the top level provided in preferences.
-
1
-
-
X32 USB & Cakewalk won't work, please read this!!!
in Cakewalk by BandLab
Posted
If you wish to use the RealTek chip you have a couple of choices
1. Leave ASIO configured for your primary interface and use WASAPI Shared or Exclusive driver mode (Preferences > Audio > Playback and Recording) when running the RealTek or
2. Deselect all input and output drivers in Preference > Audio > Devices before making new input/output selections. Then review the rest of the audio configuration to verify it picked up the device change and all the device specific settings are correct.