John Vere

It’s not clear to me what you are exactly trying to do? The x32 is a very capable board as far as I am aware. You should have no problem live steaming directly from it as well as recording the show into Cakewalk. But those are 2 entirely different tasks. We use a x18 and it’s also very capable Are you actually trying to use Cakewalk as a effects processing system? Otherwise I fail to see why you are passing the audio though it? Normally you would use Aux send returns through an interface and laptop if wishing to use VST effects live. SOme digital mixers are VST hosts. The live stream would not go through a DAW. Zillions of people are doing live streaming of shows and the mixer is the tool for the task not a DAW. A DAW might look like a digital mixer and it is most certainly a great mixer but not for live applications. It is for recording. But you could pass the streaming audio through it with no issues other than latency. You cannot avoid latency when using plug ins. And feeding 32 channels of audio!! and adding effects ?? That adds up to lots of latency.

Exactly, Any transient at the start of the filming will do. Of course real long sessions will drift but for a few songs I've never had an issue lining up the audio in the video editor. I often will use my Tascam DR 40 to record the audio and that becomes the final audio track. The camera audio is only used to line up the videos. And as far as anything I've ever read about XML it never is anything to do with Audio? https://en.wikipedia.org/wiki/XML

Just a tip. You obviously don't regularly use 1,000 plug ins. Like while testing compressors I had over 80 l installed and loaded. I chose the dozen I felt were the best and to get the rest off my list all I needed to do was go into the plug in Manager and "Exclude" the ones I will probably never use. This way they are out of harms way, Cakewalk doesn't scan them ( I think? ) and if I change my mind they are 2 clicks away from being active again. This most certainly would be a way to solve the OP's issue without actually removing plug ins from the folders. Most take up very little room. A good example of this way Melda had installed ( my fault) about 50 demo versions along with the free bundle and the demos expired as I slowly found out. This was becoming very annoying so I excluded all the demos. Some of them I will probably purchase someday so the activation will be very simple if I do.

https://plugins4free.com/plugin/2315/ https://plugins4free.com/plugin/2333/ Not an electric but it's cool sounding - https://plugins4free.com/plugin/1348/ Another free acoustic https://plugins4free.com/plugin/1065/ Take note I have not installed or tested any of these yet, I just watched the demo videos for the 2 acoustics. The other place to search for free VST's is KVR https://www.kvraudio.com/plugins/effects/hosts/newest

took me 20 seconds. https://plugins4free.com/plugin/3067/

I stopped using them over a year ago. I don’t miss them. I found many others that are not such hogs. I personally think they are not well designed if they need that much CPU

You have my curiosity I still have 8.5 on my old W7 DAW. I export dozens of projects in a day sometimes when updating my backing tracks. Those are all similar and only midi. But there’s a minimum of 5 instrument tracks and then some processing on the master bus including the LP multi band which is a CPU killer. Those projects at the most takes 1 min. To export. 48/24 dithering on. Only thing I noticed that slows down the export is this one organ I use sometimes called Colla B. It’s also slow to load. A quick test would be open a basic template project and drop a 3 min audio file. Now export that. I just did this and it took about 30 seconds. And my computer is 13 years old. But I do use SSD drives.

Dell laptops are particularly notorious for screwing up audio due to bloatware and weird BIOS settings my son gave up on his. Dell said it wasn’t their problem. Good luck and next time buy an Acer?

You guys go on Gear Space and this discussion has been gone over for probably 6,000 pages. As I said above I read a lot of it and the results are down in the . 00005 % difference zone. It’s all been done before buy lots of us audio nerds as well as way out there hi fi freaks. It’s really a waste of time worrying about it. I’d rather worry about how fast my fridge can cool my beer. And anyways it all ends up on a cell phone speaker anyway ?

The important question is what effect is this? When testing free plug ins I’ve definitely found some that bomb Cakewalk if dragged into projects. They can be inserted using the add dialogue but not dragged. But who wants a plug in kicking around that has that potential

I have to agree with @Byron Dickens The OP is staying they don’t like how their vocals sound. That’s an example of extreme difference in say compared to commercial recordings. in the dozens of threads on this topic I’ve read in the past it is stated that each DAW has a very very tiny little difference that only the best ears or measuring tools will reveal. That is not a extreme difference by any stretch. If I remember correctly it is something to do with panning laws that will be a tiny bit different in each DAW. Bottom line is great sounding vocals comes first from a great performance. Those performances don’t require much processing to finish nicely. A weak or terrible vocal performance might be made listenable By using turd polishing. The tools for turd polishing don’t really differ from DAW to DAW. So changing to different DAW will make zero difference other than you might find better tips on turd polish for certain DAWs over others.

This. But be aware that system latency will be present at the output. This can be substantial if effects are used to process the signal. This is OK for streaming as the person listening is not in the room. But that signal would be very late if playing in the performance venue

This. But be aware that system latency will be present at the output. This can be substantial if effects are used to process the signal. This is OK for streaming as the person listening is not in the room. But that signal would be very late if playing in the performance venue

Ample Guitar is an acoustic guitar and is not something you normally run through an amp. I can't think of anything that sounds worse than my Acoustic guitar with overdrive! If you are looking for metal guitar tones you need to use an electric guitar sample like Strum Session or ( sorry, don't flog me ) TTS-1.

The problem is with the mixer set up and not Cakewalk. You are taking your signal before it can be processed by the mixer. This is actually a desired method for live recording as it gives you unprocessed audio in the DAW. Just set the gain so there’s no danger of clipping and then later you use the DAW to mix and process the tracks. My question is why do you need the DAW for the live stream? Normally you would use the mixer and stream either the main mix or an auxiliary mix.

Are you opening this dialogue on a Midi track?

Funny. 2. Features I have never used. Which is part of equation for which DAW is right for you.

This is my go to for background vocals and guitars,, but be careful, it can make your mix out of phase and put the Correlometer off the map. But makes for a huge stereo effect. The pitch trick is more what you get from using a chorus, that's why they are called Modulation effects. https://polyversemusic.com/products/wider/

Exactly why I got rid of it. It wasn't anything much, I'd say I like SI drums better anyway. These are 2 much better drum sets as demo versions that are fully functional, never time out and only limitation is kit pieces. Then upgrading is simple once you have installed the product manager. Just a few minor hoops to jump through but well worth it. Addictive drums also has the fully functional Piano too. Steven Slates Drums https://stevenslatedrums.com/ Addictive drums https://www.xlnaudio.com/

To add what I generally do is all my projects share a base template and by template I will say it might not have started that way, but as I re visit older projects I update them to include my latest choices of buses and effects. If a bus is missing, I insert it. And effects are easy to duplicate because they all have presets. When ever I feel a certain song turned out real good, I go into it and I save presets in the effects and instruments and name it after that song. Then I will open a re visited song I'm not happy with, and lay it out exactly like the one I one did like by using the same routing and insert those effects or instruments and choose the preset that worked on the other song. It really doesn't take much for me because my songs are not overly complicated.

Input Quantize is in the midi track inspector.

Probably because really the only solution in this case is a second audio interface. Not all onboard audio is the same I guess. It’s a hit or miss thing. I do what you are doing with my office computer. I like to write my tutorials with Cakewalk open and test plug ins so I load up large projects sometimes. Quality seems very limited when using the on board audio and I get crashes and drop outs so I connected my old Focusrite 6i6 and the weird issues all were gone. I also have a laptop that is much newer than my office computer and it can play all my projects with out issues using on-board audio.

Always have a backup plan and always have 2 of everything. I have always kept a old suitcase I leave in my vehicle I call it the redundancy bag. It has extra cables, mikes, mike clips batteries, strings, and an old mini disk player with ( old) backing tracks on it.And a complete tool kit including soldering iron. All lot of stuff. I bring 2 guitars. 2 laptops both loaded with current playlist both connected to PA , tested and ready to go. If my guitar amp fails I can survive using the mixer. If the mixer fails I have 6 inputs available on my powered speakers. None of this has ever been deployed other than a few broken guitar strings in my 30 years as a one man show. The importance of being prepared is because the people who hired you are dependent on you and expect music to happen with no exception. The power has gone out on us a few times and I would grab my acoustic guitar ( yes that’s the second guitar) and go out on the dance floor and start pounding out Elvis rockabilly. One place had an piano I made a total fool of myself but people party on in the spirit of it all. I was at a Wedding once were this Amateur DJ blew up his home stereo speakers during the first dance. End of party. He just stood there and did nothing. I did not feel sorry for him he was an idiot.

This is why a person should use the DAW that works for you . Each will have certain features unique to only that DAW. Cakewalk can’t always do what Pro Tools can do and in probably more ways Pro Tools can’t always do what Cakewalk can do. Actually for me Pro Tools is a DAW I like second best and I found it user friendly unlike the rest of them. So why not just use it? It’s very good at Audio projects but Cakewalk has it beat for using midi tracks ( for me anyway)

As you are asking a very basic question which people normally teach them selves using the many teachings aids that are very accessible including the documentation found in the help menu and the tutorials found here https://discuss.cakewalk.com/index.php?/forum/35-tutorials/