Heinz Hupfer

HI:)

You mean a "Pro Channel" for Midi😁

Nice Idea😉

Bassman.

Hi:)

Thanks for that link! I found 2 great reverbs in that for me....

Bassman.

Hi 😀

Perhaps you have activated the Automation Write mode. Some Parameters do have a thin red line around them.

Every changes you make on play is recorded. Click on the "W"  button in the related track to deactivate it .

Global W in the Control View...

Bassman

Hi:)

If I select a note in the drum map and nudge it up or down 1 note it goes up and down 1 note.

If I reordered the drums it also goes up and down 1 note instead of to the next or previous ordered drum note, 

so it jumps all around and it's nearly impossible to find the target drum you wanted to move to.

Would like to have  the selected note(s) moved to the next or previous note in the reordered Drum Map instead of going for example from C3 to C#3 or B2.

Thanks;)

Bassman.

Hi there:)

I'm stupid, completely wrong place. It's a Waves Plugin, not Native Intruments, sorry.....

Bassman.

Hi:)

@Eddie

From there I come to the same support page where you can't get any contact Infos but this email:

info@native-Instrument.de

Which is useless, cause you can't get Support on this, down below the answer from my email:

No questions about products or technical support!

No chance🤥

Bassman.

===============================================================

Bitte beachten Sie, dass wir über diese E-Mail-Adresse keine Fragen zu Produkten und Bestellungen beantworten oder technischen Support anbieten können. Für derartige Anfragen benötigen wir detaillierte Informationen zu Ihrer Bestellung, Ihrem Produkt und / oder Ihrem Computer-System, damit unsere Experten Ihre Fragen in kürzester Zeit und zu Ihrer vollsten Zufriedenheit beantworten können. Daher möchten wir Sie ermutigen, die Support Website für Selbsthilfe und Kontaktoptionen zu nutzen.

Alle sonstigen Anfragen, die uns über diese E-Mail-Adresse erreichen, werden an die entsprechende Abteilung im Hause weitergeleitet.

================================================================

HI:)

I do work with Omni Channel Stereo. Don't know since when (Update to Version 12) some Buttons do nopt work anymore with my Controller and ACT.

All On/Off of all Elements (Pre, Gate, EQ, Comp, Deesser)

All Size On/Off of all Elements (Pre, Gate, EQ, Comp, Deesser)

ACT Numbers are:

60/43, 16/17, 107/108, 139/140 und 70/71

Can someone confirm this?

Thanks;)

Bassman.

Hi:)

Searched 2 h now for a possibility to contact Native Instruments Support.

Can't find any Email Adress or Phone number or any other contact possibility! 🤢

Just this ....

https://support.native-instruments.com/hc/de

Does not help! What a company😖

Bassman.

Hi:)

@John Vere

Maybe they change something in the DLL to know it has been installed, but if I install it, it should be overwritten and it only works when I delete it and install again...weird....

Bassman.

Hi:)

Tried the Rescan, yes.

I had to delete the DLL and install it again, then it worked. Interesting why it worked with the same DLL in my other Windows....??

Thanks;)

Bassman.

HI:)

Wanted to load an older Synth, but it is not recognized as a VST, here the lines of the Log File:

======================================================================

VSTSCAN: ---- 163: g:\vstplugins_2021\Xpand!2_x64.dll ----
VSTSCAN: [ShortPath] g:\VSTPLU~1\XPAND!~1.DLL
VSTSCAN: [RegKey] Software\Cakewalk Music Software\Cakewalk\Cakewalk VST X64\Inventory\g:/vstplugins_2021/Xpand!2_x64.dll
VSTSCAN: Previously scanned - NOT a VST plugin
VSTSCAN: Finished analyzing VST plugins - 0 of 191 VST plugins were scanned in this run
VSTSCAN: Delete untouched - Scanning for plugins to remove...
Closing log file
Thursday, 21 Oct 2021, 10:37:17 

======================================================================

I have the same Dll in another Windows Installation and there it works. iLok is started and the license activated!

What can I do? 

Thanks;)

Bassman.

Hi🙂

I can see you're in contact with Alexey on his Homepage , so you have the very best help you can get for writing an AZController Preset😁

Greetz,

Bassman.

HI:)

Map 1 should be enough for the beginning, I have a basic Preset with  normal, double press and long press actions on every button, additional  we can use a Shift and Ctrl Button, so a lot possibilities for actions...

If you can wait a few days I can make a first starting point...so what do you want to have on the Buttons? 

For normal actions I do have on my preset:

Vol, Pan, Sends 1-6, (Pan Sends 1-6), Solo,, Mute, Rec Arm, A.Write, Phase and Echo.

For the Buttons on the right I have Start, Stopp, Rec, WAI +-, Shift and Ctrl Button.

I think I do make these and just tell me if it is OK for the first preset....

Greetz;)

Bassman.

HI:)

@daveindev

Could you send a photo of this controller or give the complete name of it? Can't find a launchpad with rotors in the net....

Then I can help you writing an AZController Preset......look at this:

https://1drv.ms/u/s!Al2mKojzOW0Mq7wpLVhlBk1B8qlUIA?e=be8Y9p

Greetz;)

Heinz.

Hi:)

@msmcleod

Doubleclick did it, thank you. Now I saw these dots at the right with a little menu to recall the task settings. 

Thank you and sorry for the inconvenience;)

Bassman.

@msmcleod

Tried out this:

1. Used a Project Template

2. Selected a Time Portion to Export

3. Export - Audio

4. Loaded my Preset with Busses as Source

5. Select only the Master Bus

6. Select a Task and named it

7. Closed the Export Window

8. Saved as a new Preset

9. Opened the New Template

10. Named  the Project

11. Select a Time Portion

12. Select my Preset in the Export Window

12. I can see the "Saved with the Template" Task, but all "used" Busses are selected and when I Export it, it will write a File for every used Bus.

The Problem is, when I close the Export Window with only the Master Bus selected and I open it again, all busses are selected again, so it's saved with all busses selected in the Template. If the Export Window is open I can't save the Template...... (So sorry I have not used this in the EA time, but have not worked much 3 weeks cause of a heavy depression (no wonder in these bad times))

So how can I save in the Project Template to have only the Master Bus selected? Can't find out....

Thank you very much;)

Bassman.

HI:)

@msmcleod

Thanks;) I'll check this out.

Bassman.

HI:)

When I export Busses, is it correct that the selection of a (source) bus isn't saved with a preset?

I normally always export the Master Bus, sometimes my Mix Bus. Not a big deal to deselect all others ......

Thanks;)

Bassman.

HI:)

I'm first decreasing the loudest portions with Clip Gain (not more than 3-4 dB), then increase the softest portions again with Clip Gain. 

Then again decrease loud "s", "t" and possible pops, when I got a "live" recording, should have no pops in studio recording with a filter.

These pops I cut out and put them on another Track with different EQ.

After this a gentle compressor on everything...lot of work, but it's worth it!

Bassman.

HI:) 

Mostly Comp--> EQ, but sometimes as a Deesser for example the other way. Boost a frequency and it get's more compressed.

Accoustic Guitars for Frequncies you doesn't want, Boost on EQ, then use Compressor. 

Now I have this in the 2 way Deesser in the Schepps Omnichannel. Very helpful!

Bassman.

Hi:)

In the TV it's Shift+B, in the CV it's Ctrl+B but the Console has to be in Focus.

You can use the Shortcut Ctrl+Shift+Right and Ctrl+Shift+Left to get the Focus on the CV then Ctrl+B to show or hide busses!

Ctrl+TAB to get the Focus back to the TV.

Shift+B does always work, Ctrl+B only on Focus CV!

Greetz;)

Bassman.

HI:)

I can remember there was a special possibility to type in Automation Lane Values on Play, but I can't find it in the manual or elsewhere.

Can somebody remember it? There must be a Shortcut or Special Click on the Lane to type the value in.

I don't mean, making a node and rightclick/properties to change the value. There was an easier and faster way on Play at Now time.....

Thanks;)

Bassman.

P.S. Found it in the 2020.05 Update: Obviously overread it before😁 But this doubleClick doesn't work....F2 yes.

Improved support for recording automation via numeric input

When recording automation, envelope nodes can now be recorded by typing a value in the pop-up edit controls in the Inspector, Console view, Track view, ProChannel EQ, and EQ fly-out module. The numeric input will be recorded as a Jump during automation recording.

To show the numeric input pop-up, give focus to a control or its value display, then press F2, or double-click the value display.

HI:)

Export Improvements are a great forward! I always faught with the settings before and had some strange results some times.

👍👍👍

Bassman.

Hi🙂

There's a secondary Snap setting, when holding the "n " key. Set this to 1 tick and you can switch from your normal snap setting to "none" temporarily. 

Greetz😉

Bassman. 

HI:)

Weird! I only restarted CbB and it doesn't work. After restarting Windows it works again....never seen this!

Bassman.