Heinz Hupfer

@msmcleod

Thanks for the video! I have this concept already with 3 monitors:

3. monitor, only an analyser

2. monitor (screensets 2-6) 

     (2) Console

    (3) Browser, Inspector, Synthrack and a small Console

   (4) Piano Roll View   (my most used screenset)

   (5) Matrix View

   (6) Synth Rack (for automations)

1. Monitor, Mainly the Track window, sometimes with Browser and/or Inspector

Screenset 1 is the large Track view.

I have set all screensets without Full Screen, now after this Barline spectacle all with FS, but not number 1.

I'll try a problem report, maybe 4k monitors are not implemented yet? 

Thanks,

Bassman.

@msmcleod

I have tried these setting, but then all FS Windows are spread over 2 monitors, so if I have Track Window left and Console right, with this setting the console is spread over both screens, not what I want. I need a 2 monitor Full Screen just for only 1 Screenset, where I have a long track view over both monitors. Without FS I get those Barline jumps...... I think this will not be possible:(

@msmcleod

I've searched for sure and found software solutions like "display fusion" and "multimon" by mediachance but not tested it yet.

Thought there can be an easier solution within windows.

To your question: It reverts back to one monitor!

It's weird that on my home PC on 2 screens everything is OK. 

If I get no answer here on the forum I'm going to test out these Apps above....

Thank you;)

Bassman.

@msmcleod

I had the main window extended on both screens, but then I have this behaviour with these 2 4ks:

https://1drv.ms/v/s!Al2mKojzOW0MmLt4aoVjsT2fRDplmA?e=exoxK6

https://1drv.ms/v/s!Al2mKojzOW0MmLt5vTP2Mz2QEIow3g?e=C7sGcK

With full screen mode this doesn't happen!  Bassman.

HI:)

Does anybody know if it is possible to have Full Screen Mode expanded over 2 Monitors?

I Know, nvidia has the function "eyefinity", but then all programs are expanded. Just want to have CbB expanded with full screen mode not just on one display!

If possible, is it saved with a screenset or a lense?

Thanks:)

Bassman.

Hi😊

Under Bug Fix Highlights/UI is written:

Full Screen Mode only expands across multible monitors.

Does that mean that I can have Full Screen Mode over 2 Monitors?

But how? Doesn't matter how or where I click on the FS Icon, it Switches to just 1 Monitor.

Thanks😊

Bassman

HI:)

Found out that in fullscreen Mode everything is OK. If not in Fullscreen Mode, as soon I expand the main window to the 2. monitor, the barline jumps here and there and everywhere if I come to the middle of the screen.

I have one screenset which is a large track view over both monitors, and it worked well with my 43" UHD screens. Now I bought 2 4k screens, I think this is the problem and not the EA1 or 2 or the newest July update!

But does noone know how to have one large screen on both monitors without this behaviour??  Fullscreen Mode is just 1 Monitor so I can't switch this on.

Hm......On my Home PC with 2 24" displays everything's fine!

So waiting for some Input;)

Bassman.

Hi there:)

Since EA 1 my barline disappears on 1 Monitor and jumps on a 2 monitor screenset:

(2 4k monitors 43")

https://1drv.ms/v/s!Al2mKojzOW0MmLt4aoVjsT2fRDplmA?e=exoxK6

https://1drv.ms/v/s!Al2mKojzOW0MmLt5vTP2Mz2QEIow3g?e=C7sGcK

I've never seen this! It is with every project, even a complete empty one. The barnumber itself doesn't matter! But it's always about in the middle of the screen.....

Can anybody confirm? Or ist it just me...?

EDIT: Doesn't happen on my home PC and 2 24" displays, only on the 4k televisions...

Bassman.

P.S. don't look at the other things, I'm testing a new placement of monitors and speakers:)

Hi:)

Just bought it;) Nice Deal!

Bassman.

HI:) 

I never changed my strings, what for?? They're still sounding good for my music. 

You should change your strings often if you are slapping a lot....

Bassman.

Hi:)

Can nobody confirm this problem?? 

I've seen that I have older Graphics Drivers, installed the newest ones, but same problem, with having the Video View Open CbB is extremely slow!

Thanks,

Bassman.

Hi😊

Your User Name at the right above/Account Settings/Signature

Bassman

HI:)

As soon as I open the Videotrack ("V") or the Video View the Transport goes extremely slow

(Ctrl+PgUp/Pgdown or Controller related to this)

, sometimes it freezes for seconds and then move stutteringly forward or backwards. 

With not opening the Videotrack or View, but have loaded the video, everthings fine.

It's unworkable with seeing the video, but the "G" command, this works. Zooming is fine too, only the transport commands are reacting very slow.

Is there a workaround with the graphics card? I'm working very seldom with videos so it never was a problem, but now I have a longer Video for to work with, but I can't always just use "G", Jogging doesn't work too.

Thanks;)

Bassman.

HI:)

As you can see in the picture below I send all tracks to a Mix bus, which is going to the Master Bus.

the Master Out I send to ADAT Out 3 and this is muted so it is always on 0 dB in the Mix.

The Mix Out is going to Master Out, but I have a send to SPDIF Out, where I now can have my loudness to the Speakers....

--> which is controlled by my nearest reachable Rotor on my BCR2000!

Bassman.

Great Solo! Love it. I know what I am tlking about, I'm a Bassplayer too:

Just look at here:

So I know she is good!

Bassman.

@Noel

As you see problem is gone, thanks:)

Bassman.

@msmcleod

@Gswitz

I wanted to delete the AUD.INI, but decided to experiment with the Audio Preferences. 

So I changed the buffersize, which I have generally at 128 and on 2028 for mixing.

Changed it to 256 and clicked on 64 bit precision, which was unlikely unchecked (?). I always had this ON.

Cakewalk did some test and after this all worked fine.......??? 

Is it the same as to delete the AUD.ini?? Or make a new one? 

At the moment I can't reproduce the behaviour, I've undone the changes, but still OK.

Now I have an idea what happened. I decided to record a singer at home over the weekend, but I had my mixerdesk for the RME outside the weekend before and my mixer at home has no good faders. So I took the Audiobox at home and installed the drivers for it. This switched windows to 48 kHz as I saw now I tried to combine these 2 cards over ADAT cables.  

The singer didn't come because of a influenza and I changed back to RME Card but forgot to unplug  the AB.  On Wensday I tried to record something else with RME and then I saw the problems. 

I'm sure the problem was 48 kHz on Audiobox and 44.1 kHz on RME though I changed the right drivers in Cakewalk.

I hope that was the problem:) In future  I always unplug the Audiobox before switching back to RME....

Thanks for your help;)

Bassman.

@Gswitz It looks overloaded and it is! Sounds like a digital feedback, but there is none, as the waveform at recording looks fine and sounds fine.  After hitting Space to stop recording it's switching to a stereoclip totally distorted. At Recording it shows a monoclip, i have selected ADAT 1 Left Input selected. (see pictures)

Curious that the older RME drivers have now the same result as the new drivers, so it must have to do with the Bandlab Update and I can't roll back...

There is no problem in Cubase and Studio One with the new drivers, it can't be my mixer who makes problems or any other things....

Bassman.

@grem

Yes, this was the First I tried, complete new and empty project, but same result.

Bassman

Hi again:)

So, installed old drivers from 2016, no effort, every recorded clip is totally distorted, recording itself looks good!

Installed Flash Update for RME Hdsp 9652 to the newest, installed newest drivers from FEB 2019, no effort, can't record anymore:(

Switched to Presonus Audiobox and it's fine again! so no problem at all, my work can grow on....

RME Hdsp and audiobox are working fine in Cubase and Studio One.

At the moment can't figure out the problem. How can I switch back to a previous version from Bandlab?? I have made no Backup from the last Installation Files:( 

Thanks,

Bassman.

Hi again:)

WTF, tried with Sonar Platinum and same result, so it's not the update. OK, in a few hours I can test it with another Soundcard.

Instead of RME Hdsp 9652 I'm trying Audiobox 1818vsl.

Now I remember, I've installed new RME drivers, perhaps that's the problem???

I'm back soon....

Tested RME with Cubase and Studio One, recorded 1 track to test it, everything's OK with it, so it has to do with Cakewalk!

Hm.......

OK, I'm in hurry, but wanted to know:

Tested again with Audiobox and it's fine, I think the problem must be Cakewalk in conjunction with RME! anybody tested the new drivers or does anybody else have problems with RME in Cakwalk??

Bassman.

Hi there:)

Since this week I can't record anymore with Cakewalk!

Tried it with a complete new Project, but it doesn't matter which project I load into Cakewalk!

1. Picture (Cakewalk Fehler Playback alte Spur)

An recorded track from last week, everything's fine and plays back normally

2. Picture (Cakewalk Fehler Aufnahme)

Here I took a picture at the recording, the waveform is totally OK.

BUT, as soon I stop recording:

3. Picture (Cakewalk Fehler Playback) 

The waveform looks like this. It is totally distorted, as you can see in the picture, completely overloaded!

Here is a link with the pictures on OneDrive:

https://1drv.ms/f/s!Al2mKojzOW0Mk51-R-Da9Wrjq4QTxQ

I've started new Windows and Cakewalk, doesn't help:(

What's wrong, nothing changed but updated to the new versions from march....

Please help!

Thanks;)

Bassman.

Hi:)

I have not used TTS-1 it for longer time, but now I found out that it crashes immediately, when I try to write staff in the PRV. Crash without notification!

So I tried Scooks  "Light Load", but no effort. Then I searched for the dlls and found 3 of them.

C:\Program Files\Cakewalk\Shared DXi\TTS-1

G:\Cakewalk Content\Shared DXi\TTS-1

G:\vstplugins_64\

I (after backing up) deleted the 2 ones in Partition G and after that no crashes anymore! 

Maybe that helps.

Bassman.

Hi:)

I just have a OneDrive folder, and doesn't matter where I work, whether in studio or in my home, I backup the last work to that folder and on the other PC I only have to copy it to the Record partition. So always the newest version on OneDrive. Additionally there's a Backup Partition on both PCs where I copy the last work from each PC to it. All with a Autohotkey Keystroke within Cakewalk to copy the last 5 Working Dirs to OneDrive and the Backup Partition.

Bassman.

@micv

In Windows right click on Start, then System and search for dock on and deactivate. After saving your screensets and lenses you can activate it again.

Works for Win 10 German Version! I hope it's the same for the english people...

Bassman.