Promidi

Because this is under “Projects" in preferences, this is a per project setting. It will also be set as part of a project template. If you want this setting to be checked (or unchecked), save your start up template with this setting as you would like it. With the same project open, it should not change of its own accord.

Time to upgrade your internet. If you think 566 MB is large, wait until you see the size of some third party libraries..... (UVI world Suite 2 clocks in at 28.5 gig, Sampletank 4 Max clocks in at 260GB. Some libraries are even larger)

I'm curious If an MPE enabled keyboard (like a ROLI device) performance was recorded with CbB, would the data received be standard MIDI data (including poly aftertouch), albeit on all 16 channels? If that's the case, if you have 16 MIDI tracks, all set to their respective MIDI channels in the track's settings and all armed and recording, would such a recording populate all 16 tracks with MIDI data - including the poly aftertouch?

Very good points. I do indeed use a Hardware synth (Yamaha SW1000XG) that excepts Sysex strings. For a while now, I have indeed been making extensive use of SYSEX banks. These work really well I also have written many Studioware panels that themselves contain sysex. (Please don't ever drop support for opening these in CbB - and CAL scripts). I can see where you are coming from in in regards SYSEX in Articulation maps - and I am agreeing there. I can also see the issue you would have for the various Chase modes for articulation maps that contain SYSEX strings. Some SYSEX strings can be quite long and the synths need time to process some of them. Also, there has to be enough people who would use the feature to warrant the amount of work put into it. I am going to have to concede that I am very much in the minority. Therefore, I am happy to continue using Studioware panels. As regards NRPNs and NPNs. I keep forgetting that they are simply combined standard controllers that can be added to Articulation maps. So in essence, in a round about way, NRPNs and NPN functionality in Articulation maps is already there -just not as direct entries. For those I will just continue to use standard PRV NRPNs and NPN controller lanes (with the right INS file) - the names are all there in my case. The main thing I use NRPNs and NPNs for are setting pitch bend range and adjusting individual drum parameters in XG. A big thanks to the developers for fixing the pitch bend ranges in Articulation maps BTW - that was much appreciated.

You know what would be awesome? If Articulation Maps could contain SYSEX strings. Also NRPN and NPN values would be awesome as well.

Maybe. However, if I had a buck for the number the times a diagnostic says that it's “X” and it ends up being “Y”, I would be able to retire by now.... Sometimes one has to think outside the square.....

Increase the sample buffer size ( in Preferences | Audio | Driver settings) even further and see what happens..... There is no “What size should the buffer be”. If it is a buffer issue, then the “size it should be” is when you are no longer having any drop outs. On a side note, it could be a plugin doing this. Try without any plugins enabled (illuminate the “FX” on the Mix Module) Also, you don't mention the type of drive your Audio data is on (Spindle 5600 RPM / 7200 RPM / SSD)

"Warning: for full retail Kontakt only (Kontakt Player not supported)!"

My first guess is that there are stray pitch bend MIDI events in your MIDI track that is attached to the Koto. Use the Event List view to rule this out. (Maybe use Event Manager to view just wheel events) Another possibility is that due to a fault with your keyboard controller, it's sending spurious pitch bend MIDI events. Another possibility is a sample rate mismatch between your project and windows sound settings (44.1 khz vs 48 khz) - you don't say whether you're using ASIO or WASAPI

I have to say, this, combined with El-Clapo does a near perfect "We will rock you" intro! Just make sure you freeze those claps, unless you like a maxed out CPU

When you say "wouldn't boot." - that's meaning?..... won't power up at all? Powers up , but blank screen - and hard drive light activity?. You see the boot process but hangs at part of the Windows boot phase?

There is. If you own El-Clapo and you log on to your BOZ account (make sure EL-Clapo is listed on your “products” page), then the price becomes $US5.00 on checkout. Note, this is preorder, so you will have to wait for BOZ to make the finger snaps, and foot stomps available. If you preorder, you will get an email when the finger snaps, and foot stomps are available.

This is definitely going to be an issue with your PC, driver or a third party plugin rather than a specific Cakewalk by Bandlab issue. Cakewalk by Bandlab has been super usable on my lowly PC (see my signature for me specs) and I have never experienced the issues you have described. Maybe drop a note Cakewalk support at https://help.cakewalk.com/hc/en-us/requests/new?ticket_form_id=360000025633

No it doesn’t

That's a really strange issue I have never encountered. Maybe drop a note to Cakewalk support at https://help.cakewalk.com/hc/en-us/requests/new?ticket_form_id=360000025633

One enhancement that Cakewalk by Bandlab does desperately need is the ability to directly edit polyphonic aftertouch events in the PRV. Right now, only Channel aftertouch events are supported. The polyphonic aftertouch events are actually recorded in Cakewalk by Bandlab, it's the actual of editing of them that is a PITA

Now that I have more information, I was able to reproduce this. Drop a note to Cakewalk support https://help.cakewalk.com/hc/en-us/requests/new?ticket_form_id=360000025633

I performed a simple test. I created a SIT (Simple Instrument Track) using Plugin Boutique's Carbon Electra. This SIT had a send which went to a bus. That bus had a reverb effect on it's PC channel and a delay effect in it's effect bin. I saved the SIT as a track template. I deleted the SIT and the bus that the SIT's send went to. I inserted from the track template I saved. This inserted not only the SIT with Carbon Electra, but it also inserted the Bus with the reverb and delay intact effects. The routing of the send to the bus was also intact. So, unless I am misunderstanding your question, I am pretty sure this is already possible. This is with Cakewalk by Bandlab 2020.11 Build 99

Here is a description of MPE from https://support.roli.com/support/solutions/articles/36000027933-what-is-mpe- ROLI instruments use MPE to transmit their dimensions of touch as standard MIDI messages on multiple channels to achieve expressive polyphony. Each note is sent on an individual channel Messages which would normally influence all notes (like pitch bend or continuous controllers) can be expressed polyphonically. Therefore it looks like MPE uses standard MIDI but sends on all channels. In CbB if you have 16 consecutive MIDI tracks, set their channels 1 to 16 respectively, arm them all and set them all to record simultaneously, you would be able to record a performance from an MPE keyboard controller. Each track will be populated with the relevant notes. What sounds (and MPE support) you get would be up to your synth, be it a software synth or a hardware synth. Perhaps a better question would be, what VSTi plugins support MPE MIDI data. Meldaproduction Msoundfactory is an example of a VSTi that claims to fully support MPE See: https://www.meldaproduction.com/MSoundFactory

I have definitely never had this issue with Meldaproduction plugins (I am now on 14.16 - not BETA) Maybe Cakewalk needs reinstalling. See: https://help.cakewalk.com/hc/en-us/articles/360034066393-Clean-Install-Cakewalk-by-BandLab

The latest version of Bandlab Assistant is 6.4. Is this the version you're using? This can be downloaded from here: https://www.bandlab.com/download/assistant/windows As a test, I opened up the Bandlab Assistant on my PC, logged off. When I logged back on, I was presented with a Firefox browser session asking me to log on from there. I did. Then it said I could close the Firefox window to return to Bandlab Assistant. That quick process logged me back in Bandlab Assistant. My PC details are in my signature.

Yes, that is a good idea as well (and I also did this). The reason I posted the link I did, is because it shows you the latest version numbers of all their products in one place rather than having to go to each product's page individually.

Are you planning on getting a real audio interface any time soon?

To check the versions of all of Applied Acoustics Systems products from the one location, check here: All of the full versions have also been updated. https://www.applied-acoustics.com/support/ (Search for “Latest installers and manuals”)

A couple of things to try. Try disabling C-states and Intel Speedsteep (This is done in the PC's BIOS and the method varies between PCs). Try Start + run "control powercfg.cpl,,1" (without quotes) and set CPU Min and Max to 100%. In preferences | Audio | Configuration File try adjusting the following: EnableSetThreadIdealProcessor = False MixThreadCount = {number of cores minus 1} You might like to exit Cakewalk by Bandlab, go to the following folder and make a copy of the AUD.INI file before doing this: %appdata%\Cakewalk\Cakewalk Core