Hrabe EM

Hi. Only one thing was leading to resolve my problem. Installing Microsoft Visual C++ Redistributable latest supported downloads https://docs.microsoft.com/en-us/cpp/windows/latest-supported-vc-redist?view=msvc-160 . But I installed 2015-2022 and without succes. I had to install 2013 and it was the solution!

Somebody told me at facebook discus forum.

The technical support wasn't response me .

Now I am glad, that its ok.

15 hours ago, scook said:

This used to happen with Win7 when updates were pending. Making sure Windows was up to date, then re-installing was the fix.

It also can happen when MS redistributable libraries are messed up.

BandLab built a special installer for these libraries -

 

Thanks. I've installed this special installer, but the problem is still there. I Can't install Cakewalk without error reports, which looks like " Program files/cakewalk/Shared Plugins/Dewire.dll
unable to register the dll/oxk: RegSvr32 failed with exit code 0x3 " (sevelar similar reports) and after "The code is not possible to run, because MSVR120.dll is missing. Try to reinstall."

I did "clean uninstallation /renistallation several times, the problem is still there.

I tried to rescan also, but its the same.

I uninstalled Cakewalk and I installed it again. But itstill the same. I can't load any FX preset. I can load only some FX.

It seems that it can be issue with Waves plugins. But in my another software -Adobe Audiotion, its working.

When I install Cakewalk, threres a lot of similar error warnings like this

Hi.

I was working on project in Cakewalk. I reinstalled my driver for Focusrite Clarett sound card. After it, the same project which was working ok, suddenly appears warings - error with plugins. I will give it to attachement. Now I can't load my FX presets at all (nothing happen) , I cant put Sonitus FX on audio track.  .I had the last version of Cakewalk. What could be wrong and how to fix it? I tried another DAW, and there's seems all without problem. Thanks for any tip.

Hi,

When I select more clips (files) and I use "bounce" or whenI I am putting normalizing on more clips (files) it seems ok in project, but when I look up the wave file, I have one long wave which is corresponding with more tracks in project. Its very big mistake of the cekawalk.

13 hours ago, msmcleod said:

 

@John Vere  - @scook is correct here.  The Record Bit depth is the bit depth the WAV files will be recorded at, which is totally separate from the Audio Bit Depth in your driver settings. 

You can set your audio bit depth to 16 bit, and still record a 24 bit file - it'll only be 16 bit quality though.

The audio bit depth of interfaces (for recording) is slightly misleading in any case.... AFAIK... and maybe this has changed... but, most AD converters are pretty much 20 bit in any case simply due to the limitations of the hardware. They use 64 x, 128 x, or 256 x oversampling to mitigate this to some extent.  The DA converters in most modern interfaces are pretty spot on though.

When audio interfaces say they're 32 bit, that usually means they're sending/expecting audio data as 32 bit words. It doesn't necessarily mean that they're actually sampling incoming audio at 32 bit accuracy.
 

I think also that the bit rate of the recording in my DAW is setting for the rate of my recorded files, not for my audio interface.  I have Focusrite Clarett 4 Pre and in driver control, theres no setting for bitrate, only for sample rate. I never set the bitrate there.  I hope I am right.

Thanks. I am recording at 32 since I used to Cool Edit Pro 2, which hasd 16 or 32 bit option only.  But I had in cakewalk glabal set recording at 32bit, but probably when I created the new projects when I had option 16bit, the files was recorded in 16 bit.  But now I see that I can record at 32 bit anyway in session which was created with 16 bit option.. Interesting.

I am recording in 32 bits for years, but in my last several projects in Cakewalk, I forgott to see and some files was recorded in 16bit only, because my project was created for recording in 16bit.  I know, that if I change it now, the quality of the existing files will be the same. But I want to change project to be 32bit for the recording in future. And maybe it could have been efect for mixing. I have a lot of files and settings in each project and I would like to avoid to draging all files manualy to the new project and settings all again. I saved my project as template, after I created the new one with 32bit option and files from template. But after saving, there is 16bit again. See at screen .

Hi. Is it posible to convert  the whole Project to 44.1 32 bit instead of 44.1 16bit  which I have now? If yes, how to do that. Thanks for tips. (I found out now that I had some projects in 16bit, not in 32)

On 2/10/2021 at 8:54 PM, reginaldStjohn said:

I don't think that the mouse commands can be changed.

probably not. Thanks for reply.

Hi.

I describe you my question on this example. If I drag file with left button mouse and hold Ctr together It will create a copy of the same file to another place. Is it possible to change this command to do the same but holding Alt instead Ctr? I tried to change it many times, but in settings (Preferences) of Keyboard Shortcuts, I can't find, where this setting is. Because its not standart command on keyboard but in combination with mouse Thanks for some advice.

28 minutes ago, solarlux said:

Have you this option selected as advanced how in picture?

 

Thanks a lot. I have it, but I didnt see it before, I think its something new in Cakewalk 🙂 . Thanks.

Thanks. After installing fix Cakewalk_by_BandLab_Update_Setup_27.01.0.088 I can finally  open my projects. I tried t o open several of them, so I hope it will be ok now.. Thanks a lot!

But I can't import my keyboart shortcuts and I can't change them, because I don't see keyboard shortcuts  in Edit-preferences at all.

Thanks for reply

I had to change numbers to 33, 44 and 66 and now its working. Very strange, that 3, 4 and 6 did nothing .-)

thanks. Its working at me, but not the switches with 3, 4 and 6. Its strange, that its doing the same different controllers inside Cakewalk.

Hello.

 I tried to control plugin Bias FX inside Cakewalk by Bandlab (Sonar). I tried to controll with Behringer FCB1010 foot controller. Its working BUT the numbers (which are the midi commands for switching pedals inside Bias FX) 3, 4 and 6 doesnt work and do nothing. But in standalone version of Bias work all without problem. Now I tried with another controller - Melloaudio midi commander. And its the same with it! The same problem inside Sonar. And I tried to controll Overloud TH and the same problem.

Any tips for help? Thanks a lot

19 hours ago, msmcleod said:

I thought you might be able to use the new "MIDI Learn" function, but I can't work out how to route this to VST effect parameters.

You can do it using ACT though...

Craig Anderton wrote an article way back in 2007 about this:

https://www.soundonsound.com/techniques/using-sonars-act-hardware-controllers

 

thanks i will see

19 hours ago, scook said:

If Bias (or any FX plug-in) works with MIDI data make sure the "Enable MIDI Input" is selected in the VST2/3 drop down above the plug-in UI.

When enabled, the plug-in will be listed in MIDI track input drop downs. Make sure input echo is enabled on the MIDI track

 

Any plug-in may use MIDI for automation via Remote Control and ACT

 

Yes, I haven't selected this!...now its working!...some switches on controller work now, some do nothing (in standalone worked) but, now I try to resolve, but thank you very much!

I have the foot midi controller and its working with Bias FX when iI use it as stadalone. I would like to use controller inside Sonar too. But I am helpless with it. I thought that I could create midi track which will send midi to Bias (VST) , but theres no possibility to insert send at midi track. anyone some hlep? Thanks everyone for some tip...