John Vere

Yes I guess I was thanks for clarification.

Export midi only exports the very basic midi data. If you Save a midi file it will contain the other important information like patches and tempo.

Not sure what you are saying because in the screenshot it is showing? Are you meaning the version that doesn’t say 64 bit? The one at the top might be a 32 bit or VST 2 version. If you select the option to only show VST3 versions when available then what you are seeing is correct.

Not the answer you are looking for but a possible solution. If you have the ability to use a directional dynamic mike like a SM 57 you might be able to eliminate the noise at the source. It depends on what you will record with. It’s one of the reasons I chose the Tascam DR 40 handheld recorder. It not only has the condenser mikes built in but it also has XLR jacks so I can do direct from the mixer or add 2 more mikes. There-are also some very directional mikes used by video people for when they do location interviews.

As said if you have Midi as the template and then the audio exports as stems starting at zero it’s not a big deal. Everyone has different approach’s to what effects are used so personally I would not worry about duplicating what the first person used. I just go at it with my own methods which is why collaboration is a wonderful idea to get a completely different perspective of a mix

There’s a difference between built in audio on a laptop and a desktop computer. For many desktop on board audio systems Windows detects when you plug a jack in. Like I never plug anything in to the mike jack so it will not even show as an input device. I guess if your computer has both a speaker and a headphone jack then that will definitely confuse Cakewalks ability to select the default output device. They may show as available in audio devices but the master bus output can only use one. There is a way to add a headphone bus that solves the problem. But it can be different for each computer how this might work. If you look to the right of your buses in console view you’ll see a divider you can pull left to show the hardware mixer. Laptops are different in that they have both built in mikes and speakers as well as the jacks. The headphone/ mike jack disables the speakers/ mikes so it s still the same device and therefore no problem.

Click on clip to highlight Hold CTRL and drag to new location. CTRL copies the clip If you hold SHIFT at same time it will maintain place on time grid. Just holding shift will move a clip to new location. When choosing a track by clicking the number I always use ALT mouse wheel and zoom out to see whole project to make sure everything got highlighted

If it is live with no drums or click tracks that makes it easy. All I do is export as stems at a high quality rate and drag and drop into a new project usually based on a template for the type of music. The critical difference is if the Pro tools session was recorded to the clock. But it’s pretty easy to take the audio and drag it to the timeline and create a tempo map in Cakewalk. If it was played to a clock then the midi file will make that easy. Just make sure you Open the midi file. Bummer is you can’t use a template.

I’ll add that you can store templates anywhere you want them including backup drives. But only the ones you place in the folder selected will show on the start screen. Like scook I’ve used a custom location on my data drive for years now and all my templates are fine. I had to change my pathway back to the default C drive location for making the tutorials so it would show the default templates for demonstrating opening new projects. I did that 2 years ago and I just copied a few of my custom templates there as well. They are unscathed after numerous updates. They really take up zero space so the default is just fine by me these days. I just like having my back ups on other drives as well.

I have done things out of order a few times and I never seemed to have anything weird happening to CbB but possibly because I always leave folder pathways and such to defaults. And I have 8.5 then jump to X3 and I have the Lexicon Reverb. So I’m sure I got it from 8.5. But as I say I remember looking for it and Tru Piano and just ran the 8.5 installer only checking the bare bones of what I needed. This was long after I had installed the rest of them. Note you should really copy the disks to your hard drives as I would not trust an optical disk as a dependable source.

Yes this catches me out all the time. Normally like scook says I have my own templates but if I start a project with a Midi file, as I often might do, I have to always remember to change that to Overwrite before I lay down any new tracks. It is yet another default that annoys me. To me it should be a global pre set, not per project.

You must have the vocals assigned directly to the master. Create a vocal bus.

My first guess is there's no kit loaded into SD. I've never used a drum map with it as I always stick to 90% GM mapping.

I thought the word was going to be Talent. A music teacher told me once that the successful artists have at least 2 of 3 attributes. Talent, Ambition and Knowledge. The ones who have all 3 are lucky. At first I thought this was wrong but then you think of an artist you might run into. Like the dude that will buy expensive gear and talk about gear forever, and read all the magazines and can tell you just about anything about every hit record and who played on it. They are always trying to put together a band and book gigs, but there's just something missing when they play. Talent. Or the person who has lots of Talent and Knowledge but you can't get them off the couch, No ambition. You can go a long way with lots of Ambition and a little Talent. ( Taylor Swift?) I'm very similar to Tim in my approach to vocals. What I'm seeing for me is I just turned 70 so as I age the components needed to sing are wearing out. I defiantly cannot hear like I used to and my voice is not as smooth as when I was 50. I will re sing the same song I recorded 25 years ago and it's like a different person. But it is what it is, and I'm not trying to compete with anybody or score a record deal. I just want to enjoy the process without technology getting in my way. I'm real happy to be in a place with my set up that works without fuss. It is defiantly worth the time and effort to get the Hardware and software under your absolute control and leave that part of it behind you and start making music. I try and not overuse Melodyne and have slowly learned how to use the other tools it offers like aptitude and timing more than the pitching tools. So now I can just be loose when I sing and not obsess about perfecting the track. Ultimately I like to get out in the real world and sing my songs live a dozen times or more before I commit to tape. Writing a song , recording a backing track and then singing the song cold will never work well for me. The singing has to take on a life of it's own, you might completely re phrase everything and choose a different melody even. It all happens when you get out there and belt it out in front of real people. And I'll end with saying , don't obsess about unimportant stuff like bit depth. It's not a deciding factor in making great recordings.

This is how Cubase works for the transport. I could never get used to it always being in my way.

What you are doing is similar to using hardware synths. The only difference is the midi data doesn’t leave your computer. You insert the tracks you need and then assign a channel to each track or tracks for each instrument needed. Then choose FL studio as the outputs for the tracks. This part I can’t verify as I would think you need a 3rd party midi routing app that Cakewalk can see. Look in preferences midi devices output for that.

To add about using 3rd party loudness meters The paid version of You Lean loudness meter allows drag and drop analyzing of audio including dragging a track. This not only gives you total peak and LUFS but if you make settings for your target levels the graph will put markers where you go over those limits. So you don’t have to search for peaks in real time. I find Cakewalks meters are just fine for most recording and mixing applications. But I like more details when editing.

Dang, learn something new every day. Now I'll have to re do the Video 🙃

That's an interesting way to put it." Stable Version". The first release of Next we would assume and hope will stable as they are building it from the ground up. Once people get to test it we will no doubt find a few "bugs" Bugs and Stable are 2 different things with software. Example the currant version of Cakewalk is very stable. The only way to crash it is to use an incompatible Plug in or use a pour quality audio interface and drivers. But there's always a few bugs lurking. Bugs don't necessarily make software unstable, they just cripple features. When it was Sonar Platinum it had hundreds of bugs and it was more unstable. Now it not only stable but has only a few very minor bugs that hopefully will be killed in the upcoming final release. Any left over bugs will have to be fixed in Sonar.

An easy way to gain space up there is use the Short cut C. To hid the control bar. You will be surprised at what gets done without it. And when you need it just press C again. Working on laptops I find keyboard shortcuts are more important. Especially D for multi dock I made a video about using 1 screen

I don’t look at the meter I look at the numerical read out as that always holds on to the highest peak reading until you re start playback. But if it serious level management I want I will use a 3rd party meter like You Lean or Melda MMeter. That also gives me RMS and LUFS which is better info about the track.

@azslow3 The reading is using 48hz and in Cakewalk preferences. I thought about running the RTL utility by Oblique but its not that important to me. I just thought it was of some interest to share that Behringer drivers seem to be on par with other household brands these days. I’ll agree that the advertisement for ultra low latency is misleading but I tend not to pay attention to advertising as I grew up in the 50’s when they told you smoking Camel cigarettes was recommended by more doctors than any other brand. Because I don’t use real time effects, latency doesn’t bother me. Example I’ll be using the X18!to record 14 tracks at an upcoming live show we are doing in a week. It belongs to my son and we’ve been using it as a live mixer since last fall. I hadn’t tried the USB interface feature and was super impressed with how easy it was to set up and use with Cakewalk. The USB output is independent of the live mix. This is the critical difference from other set ups I’ve used. The laptop will be running both Cakewalk and the Mixer software. My son can also control the mixer from his tablet so will fine tune the mix from out front. The other guy has his in ear monitor mix control on his cell phone. Im using a second laptop to playback split stereo backing tracks. I could have dumped them into Cakewalk. This is more bulletproof. We will also have a 6 camera video shoot happening run by a guy with 40 years of experience. I’m finally going to have live videos for most of my original songs! Sorry about the side track. But I will be using the Real Tek audio on my playback laptop like I have for the past 20 years with out issues. And it’s not the ASIO driver involved.

@User 905133 thanks for re-posting the question in a polite format. @Lord TimThat’s what I figured. Not sure what the rules are for people beta testing. Are they expected to keep silent or are the testers allowed to make open comments in the early access forum? I signed up for Next but haven’t gotten any mail yet. Are people testing already?

Instead of the windows minimize have you tried using the short cut D? When I use one screen I use the D to hide show the multidock. Shift D makes it full screen and once full screen it stays that way as you use the D to hide /show. When I use 2 monitors I put the multidock floated to the second monitor. I have 2 workspaces, one that is using 1 screen the other with the multi dock on the second monitor. I see why you would be doing this backwards but I can also see it would require swapping Views in the Display settings first. I've never done that so not sure if this works. But anyway I see no reason the D key would not remove the multidock from the second monitor.