Annie Posted October 8, 2021 Share Posted October 8, 2021 New CbB here. Not sure if this has been answered elsewhere... Installed CbB via BandLab Assistant (Run as Admin), installing all Add-ons at the onset. Trying to insert any SI (Drum, Piano, Strings etc) gave me this prompt. Vst folder path looks correct (following Cakewalk documentation). I did uninstall/install, regedit etc., three times. No luck. What am I missing/doing wrong? 1 Link to comment Share on other sites More sharing options...
hbd999 Posted October 8, 2021 Share Posted October 8, 2021 (edited) I would like to know as well ! I was going to write the same post as I did exactly the same things you described, yesterday, for the same result. So at least we know this issue is not specific to one user, that's a start. This is a bit frustrating right ? I don't even have a CD reader Edited October 8, 2021 by hbd 999 1 Link to comment Share on other sites More sharing options...
spielbrick Posted October 8, 2021 Share Posted October 8, 2021 Hello, Just installed Cakewalk and i have the same issue... 2 Link to comment Share on other sites More sharing options...
scook Posted October 8, 2021 Share Posted October 8, 2021 BA is being phased out for CbB installs and updates. Try the Cakewalk Web Installer Link to comment Share on other sites More sharing options...
hbd999 Posted October 8, 2021 Share Posted October 8, 2021 I tried to do a fresh install with this installer. I get the exact same result... Link to comment Share on other sites More sharing options...
scook Posted October 8, 2021 Share Posted October 8, 2021 Link to comment Share on other sites More sharing options...
hbd999 Posted October 8, 2021 Share Posted October 8, 2021 Thanks I will try that. I already spent too much time to give up this easy Link to comment Share on other sites More sharing options...
hbd999 Posted October 8, 2021 Share Posted October 8, 2021 Well, no success either. Tried the redistributable installer & also by downloading them on the MS site. Link to comment Share on other sites More sharing options...
scook Posted October 8, 2021 Share Posted October 8, 2021 Is "C:\Program Files\Cakewalk\Studio Instruments" or any of the subdirectories compressed compressed? Link to comment Share on other sites More sharing options...
spielbrick Posted October 9, 2021 Share Posted October 9, 2021 Hello, Thank you @scook for your help ! i tried a fresh install with the web installer. And i still have the same issue. The "C:\Program Files\Cakewalk\Studio Instruments" and subdirectories are not compressed. The "Boost11" VST wich is in the same folder as the Studio instruments is working fine. I've compared access rights between "Boost11" directory/files and "SI-Drum Kit" and they are the same. When i add a Studio instrument track, the instrument window is working, i can interact with it. But no sound is playing. Maybe we have a problem with the access to the wave files of the instruments.... (just a guess) FYI, i also have a KORG synth wich is working fine. Link to comment Share on other sites More sharing options...
Leslie Diedrick Posted October 9, 2021 Share Posted October 9, 2021 Hi all, Newbie here, sorry for repetition After multiple installs of CbB after a fresh Win 10 installation I'm getting the same error message to reinstall with the VST plugins. All software/drivers are up to date. I have had no issues in the past so this is totally new to me. Interestingly I have tried this on two very different systems (XPS intel laptop & AMD Desktop) and have the same error message so at wits end. I thought that I may have a conflict on my usual desktop PC but seems not. I've been using Cakewalk from well before Bandlab days without this issue so at a loss. Link to comment Share on other sites More sharing options...
Andrew Easterling Posted October 10, 2021 Share Posted October 10, 2021 I'm also experiencing this issue. Brand new install on Windows 10 and I can't get any sound to play through any of the instruments I've tried. It does look like midi is registering since the keys on the instrument widget are highlighting. Link to comment Share on other sites More sharing options...
John Vere Posted October 10, 2021 Share Posted October 10, 2021 @Andrew Easterling You probably have not set your audio up properly. Watch my tutorial and I guarantee you'll have audio. As far as this OT goes there seems to be an issue right now as they introduce the new Cakewalk installer. So in the mean time go to the Free Instrument thread in this sub forum and try some of the many free alternatives available. I like the SI instruments but I don't really use them. Plug in Boutique is a great place to start with no hassle downloads. Just sign in. https://www.pluginboutique.com/ This is another no hassle site I use. https://plugins4free.com/ For Bass I use the Ample P bass lite. For drums I use Addictive Drums which has a free demo version which doesn't expire, they are just missing the Toms so you just use TTS-1 or MT power kit for toms. https://www.xlnaudio.com/demos There is also the AD Keys Piano demo which is my main piano. It's only missing the lowest and highest octaves which you don't really need for most music. There it also the MT Power Kit. SI piano- there are dozens of great free electric pianos. I use Mr Tramp for Wurly. I have at least 50 free vst instruments that are as good as any I purchased. Link to comment Share on other sites More sharing options...
Avi Singh Posted October 10, 2021 Share Posted October 10, 2021 Hi, I have the same issue with SI Instruments are not properly installed please reinstall using your original CD? Outside of this every thing else is working. I can listen to my previously composed music pieces. I have also reinstalled Cakewalk using the Webpage link and still getting same message. Other DAW are working fine as well. Only hardware change I have made is added a new SSD hard drive and reinstalled Windows 10 Pro. Computer spces are Dell M6800 with 16 GIGs or RAM. M-Audio M-Track MKII Audio Interface. Thanks for your help.. Link to comment Share on other sites More sharing options...
Annie Posted October 11, 2021 Author Share Posted October 11, 2021 9 hours ago, John Vere said: @Andrew Easterling You probably have not set your audio up properly. Watch my tutorial and I guarantee you'll have audio. As far as this OT goes there seems to be an issue right now as they introduce the new Cakewalk installer. So in the mean time go to the Free Instrument thread in this sub forum and try some of the many free alternatives available. I like the SI instruments but I don't really use them. Plug in Boutique is a great place to start with no hassle downloads. Just sign in. https://www.pluginboutique.com/ This is another no hassle site I use. https://plugins4free.com/ For Bass I use the Ample P bass lite. For drums I use Addictive Drums which has a free demo version which doesn't expire, they are just missing the Toms so you just use TTS-1 or MT power kit for toms. https://www.xlnaudio.com/demos There is also the AD Keys Piano demo which is my main piano. It's only missing the lowest and highest octaves which you don't really need for most music. There it also the MT Power Kit. SI piano- there are dozens of great free electric pianos. I use Mr Tramp for Wurly. I have at least 50 free vst instruments that are as good as any I purchased. I've since gone to look for other plugins in the meantime. MT Power Kit, Ample Sound, Spitfire Lab - they all open okay in Cakewalk. I'll check out your video and the links. Thanks a bunch! 1 Link to comment Share on other sites More sharing options...
Starship Krupa Posted October 12, 2021 Share Posted October 12, 2021 Another thing to try is making sure you have all of the Microsoft Visual Studio runtimes installed on your system. Never had this problem, so I'm not sure, but I have seen it happen when programs change installers. The developers' systems of course have every C++ runtime known to the computing world, so they don't find out that there's a problem. Link to comment Share on other sites More sharing options...
scook Posted October 12, 2021 Share Posted October 12, 2021 13 hours ago, Starship Krupa said: Another thing to try is making sure you have all of the Microsoft Visual Studio runtimes installed on your system. Never had this problem, so I'm not sure, but I have seen it happen when programs change installers. The developers' systems of course have every C++ runtime known to the computing world, so they don't find out that there's a problem. This was a proposed remedy in a similar thread linked above. It does not fix this problem. BandLab knows about the problem and reproduced it. 1 2 Link to comment Share on other sites More sharing options...
hbd999 Posted October 13, 2021 Share Posted October 13, 2021 @John Vere Thanks a lot for your links, and I didn't know about the XLN Demos without limit. Turns out they will perfectly cover my needs. Also thanks @scook for your support. Link to comment Share on other sites More sharing options...
msmcleod Posted October 14, 2021 Share Posted October 14, 2021 @Annie - Please use the installer detailed here: 1 1 Link to comment Share on other sites More sharing options...
Don Cobb Posted October 14, 2021 Share Posted October 14, 2021 Soooooo... not a single reply from Bandlab about how to correct this problem? I have a brand new laptop, installed C/B and it has no drums. Of course I have no "original disc" to reinstall from. I am SO disappointed to see the endless replies and NO solution here. Maybe after 20 years of using Cakewalk I should switch to Garage Band, which I cannot access from my Windows 10 laptop. Bandlab is irresponsible for not immediately posting the fix IMO. Yes, I know this is a forum, but Cakewalk Tech used to post to their forums because it's the responsible thing to do. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now