Quark Posted August 25, 2020 Share Posted August 25, 2020 Hi there, I am using a iRig HD2 and Cakewalk (Bandlab). Initially I worked with Asio4all, but the connection dropped out frequently, even at high sample rates (same problem in the Amplitube console ) . I've then changed to the new "iRig Asio driver" and it works very well in the Amplitube console in Cubase or in Reaper (at sample rate 128), but I can't make it work in Cakewalk at all!? I only get the message "unable to open audio device". Thereby, I've set the driver mode to "Asio", the devices to "irig device in/out", and aligned the driver settings accordingly. Of course, I've closed all other programs that access the ASIO driver. Whatever I set, the Asio status in "IK Multimedia irig Device COntrol center" is ""ASIO not active". Thus, I assume that cakewalk is not accessing the driver at all. Any ideas? Thank you! Marc Link to comment Share on other sites More sharing options...
Kai Olav Fredriksen Posted September 29, 2020 Share Posted September 29, 2020 Same thing here. Is it all OK for playback? That works very fine for me. But as soom as I arm a track for recording or turn on input echo I get that same message. Both on my laptop and my desktop. The iRig ASIO works fine for me in say Amplitube. Link to comment Share on other sites More sharing options...
Noel Borthwick Posted November 2, 2020 Share Posted November 2, 2020 @Kai Olav FredriksenThanks for reporting this. I've fixed the issue for the upcoming release. Let me know if you would like to test a build with the fix. Link to comment Share on other sites More sharing options...
Kai Olav Fredriksen Posted November 3, 2020 Share Posted November 3, 2020 16 hours ago, Noel Borthwick said: @Kai Olav FredriksenThanks for reporting this. I've fixed the issue for the upcoming release. Let me know if you would like to test a build with the fix. Thank you Yes, I would like to test it, very much so Link to comment Share on other sites More sharing options...
Kai Olav Fredriksen Posted November 3, 2020 Share Posted November 3, 2020 16 hours ago, Noel Borthwick said: @Kai Olav FredriksenThanks for reporting this. I've fixed the issue for the upcoming release. Let me know if you would like to test a build with the fix. Tested, and works ? 1 Link to comment Share on other sites More sharing options...
Noel Borthwick Posted November 3, 2020 Share Posted November 3, 2020 Im quite impressed I can put the latency down to 16 samples and it works fine here. 1 Link to comment Share on other sites More sharing options...
Kai Olav Fredriksen Posted November 3, 2020 Share Posted November 3, 2020 13 minutes ago, Noel Borthwick said: Im quite impressed I can put the latency down to 16 samples and it works fine here. Yes 16 at mine too But.. .I was maybe too quick. When trying to record now I got the output from iRig in to the input of iRig when arming a track. So I got both line in and out to in... if it makes sense. When using ASIO4ALL it behaves the way I expect it (sent this to Morten as well). Could you have a look? Link to comment Share on other sites More sharing options...
Noel Borthwick Posted November 3, 2020 Share Posted November 3, 2020 Yes I already fixed that last night (after the build you got). In the next release you will not be able to choose a stereo or right channel - that was the problem. 1 Link to comment Share on other sites More sharing options...
Lord Tim Posted November 4, 2020 Share Posted November 4, 2020 I use an iRig HD live (albeit with an iPod running my amp sims, etc.) and it's really solid. This is all good news for me, because I'm eventually planning to run it with either a small laptop or a NUC or something rather than the iPod. Link to comment Share on other sites More sharing options...
Nick Maltzoff Posted November 6, 2020 Share Posted November 6, 2020 (edited) I'm using iRig Pro i/o and can't hear any sound through my headphones using ASIO on "playback and recordings" and Devices set to Input Drivers > iRig Device IN 1 & Output Drivers > iRig Device OUT 1. Echo/Input monitoring is ON. With ASIO selected, the iRig Pro light goes green when playing (so there is a signal) when using the left channel. When trying to record using the iRig ASIO driver, I get this error:- I do hear sound when setting "Playback and Recording" to WASAPI Shared (but latency is very poor). I also hear sound when setting "Playback and Recording" to WASAPI Exclusive (better latency, but very unstable - becomes very distorted every few minutes). How can I get the iRig Device drivers to work with Cakewalk (they work with Amplitube 4) ? Edited November 6, 2020 by Nick Maltzoff Link to comment Share on other sites More sharing options...
Noel Borthwick Posted November 6, 2020 Share Posted November 6, 2020 Download the latest installer from this link. We'll be officially releasing it soon. Link to comment Share on other sites More sharing options...
Nick Maltzoff Posted November 6, 2020 Share Posted November 6, 2020 Thank you Noel. Unfortunately there's still no sound. In addition, now the iRig Pro i/o signal light only shows a signal light for a few seconds after pressing Echo/Input monitoring. I've updated the iRig firmware and the iRig driver, rebooted the pc several times. The Cakewalk version running shows 2020.10 Build 075, 64 bit) Any suggestions and would you know whether you've tested the iRig Pro i/o at your end (it's quite a popular device I believe) . Link to comment Share on other sites More sharing options...
Nick Maltzoff Posted November 7, 2020 Share Posted November 7, 2020 (edited) Hi Noel, I'm going to return the iRig Pro i/o as their ASIO driver doesn't seem to work with Cakewalk. Could you confirm that the Focusrite Clarett (solo / 2i2 / 4i4) ASIO drivers have no issues with Cakewalk ? 20 hours ago, Noel Borthwick said: Download the latest installer from this link. We'll be officially releasing it soon. 20 hours ago, Noel Borthwick said: Download the latest installer from this link. We'll be officially releasing it soon. Edited November 7, 2020 by Nick Maltzoff Link to comment Share on other sites More sharing options...
Noel Borthwick Posted November 7, 2020 Share Posted November 7, 2020 Hi @Nick Maltzoff, I tested with the iRig pro I/O. It's working for me and @Kai Olav Fredriksen with no problems so it should work for you. Esp is it's working with amplitude. Please try the release candidate build 84 which has some more related fixes that we posted yesterday. In this build you should only see a single mono input. Let me know if you can't hear the output with this build and we can troubleshoot further. You can also play with the asio driver settings. Also make sure that your master bus is routed to the iiRig output. Link to comment Share on other sites More sharing options...
Nick Maltzoff Posted November 8, 2020 Share Posted November 8, 2020 Thank you Noel. Build 84 worked immediately (after a pc reboot) and beautifully. Love the low latency I've already ordered the Focusrite Clarett 4i4 (and the return of the iRig Pro i/o), but for all other iRig Pro i/o owners, they'll be very happy. 1 Link to comment Share on other sites More sharing options...
Nick Maltzoff Posted November 11, 2020 Share Posted November 11, 2020 If you're reading this and considering purchasing an iRig Pro i/o, I think it's only fair to point out that whilst the iRig Pro i/o worked well with Cakewalk with low latency, the Focusrite Clarett 4i4 that I subsequently received worked better as there was no perceptible latency whatsoever. Link to comment Share on other sites More sharing options...
Bas Feenstra Posted November 15, 2020 Share Posted November 15, 2020 Latest version (Build 88) still doesn't work with the iRig HD2. I am 100% my settings are correct and all is working fine in Reaper, Audacity, Amplitube, Guitar Rig 6 etc. What to do? Link to comment Share on other sites More sharing options...
Kai Olav Fredriksen Posted November 27, 2020 Share Posted November 27, 2020 On 11/15/2020 at 7:44 PM, Bas Feenstra said: Latest version (Build 88) still doesn't work with the iRig HD2. I am 100% my settings are correct and all is working fine in Reaper, Audacity, Amplitube, Guitar Rig 6 etc. What to do? Strange, it works perfectly with my Stomp I/O. I do think I have the HD2 lying around, I will check it and come back to you. Link to comment Share on other sites More sharing options...
Noel Borthwick Posted December 2, 2020 Share Posted December 2, 2020 On 11/15/2020 at 1:44 PM, Bas Feenstra said: Latest version (Build 88) still doesn't work with the iRig HD2. I am 100% my settings are correct and all is working fine in Reaper, Audacity, Amplitube, Guitar Rig 6 etc. What to do? Ben or anyone else still having issues with iRig HD 2 i let us know if this is ok in the latest build. The folks at IK multimedia have validated the build and it works ok for them so if you have issues please contact IK directly and they can help troubleshoot it. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now