Larry Jones Posted March 3, 2019 Posted March 3, 2019 3 hours ago, klbailey3 said: how do i "clean up registry"? I've used Ccleaner (free version) many times. It seems to help, and it hasn't messed up my system yet. Windows registry is a fragile bird, so use at your own risk.
msmcleod Posted March 3, 2019 Posted March 3, 2019 9 minutes ago, Larry Jones said: I've used Ccleaner (free version) many times. It seems to help, and it hasn't messed up my system yet. Windows registry is a fragile bird, so use at your own risk. +1 for CCleaner.
Noel Borthwick Posted March 3, 2019 Posted March 3, 2019 @klbailey3 did you try turning off ALL notifications in preferences yet (the main checkbox)?
Greg Morales Posted March 6, 2019 Posted March 6, 2019 (edited) Same here no projects loading since I installed the last update. Can't work on new projects either... Update about 10 mins later after reading thread: Edit > Preferences > Customization > Display > Disabled Project Load Notifications Everything back up and running as expected! Thanks Noel for the tip!! Edited March 6, 2019 by Greg Morales New Information
klbailey3 Posted March 9, 2019 Posted March 9, 2019 On 3/3/2019 at 3:42 PM, Noel Borthwick said: @klbailey3 did you try turning off ALL notifications in preferences yet (the main checkbox)? yes..still nothing
Noel Borthwick Posted March 9, 2019 Posted March 9, 2019 @klbailey3I don't follow. If you turned off all notifications you will see no prompt saying "creating UI". What problem are you seeing exactly?
klbailey3 Posted March 9, 2019 Posted March 9, 2019 3 minutes ago, Noel Borthwick said: @klbailey3I don't follow. If you turned off all notifications you will see no prompt saying "creating UI". What problem are you seeing exactly? yeah but it still will not open
Noel Borthwick Posted March 9, 2019 Posted March 9, 2019 @klbailey3 check your PM's for some instructions.
Ronald Bakker Posted March 13, 2019 Posted March 13, 2019 I have the same issue (not in all projects). The workaround from Noel "In Preferences | Display try turning off "Show Project Load Notifications" and see if it changes anything." fixed it for me for now.
Noel Borthwick Posted March 13, 2019 Posted March 13, 2019 @Ronald Bakker thanks for clarifying. Are you using a control surface as well - if so which one?
Ronald Bakker Posted March 13, 2019 Posted March 13, 2019 @Noel Borthwick Yes, in this setup I use a presonus faderport. The first one.
Noel Borthwick Posted March 14, 2019 Posted March 14, 2019 Hopefully the next update should fix that case then without you needing to turn off notifications..
Rick Hamouris Posted April 10, 2019 Posted April 10, 2019 (edited) *UPDATE - LOL... shot myself in the foot real bad... the default IO's were ASIO, my creative X-Fi only uses WDM... so once I fixed that... voila! Chiming in here... I not only get a failure at the UI notification but endup with a BSOD error stating DPC_WATCHDOG_VIOLATION (with the resultant forced restart) I've tried updating hard drive drivers, but I don't have iastor anywhere. I've attached my sysinfo file (memory.dmp is too big) 'preciate the feedback sysinfo.txt Edited April 10, 2019 by Rick Hamouris Solution
Xoo Posted April 10, 2019 Posted April 10, 2019 6 hours ago, Rick Hamouris said: *UPDATE - LOL... shot myself in the foot real bad... the default IO's were ASIO, my creative X-Fi only uses WDM... so once I fixed that... voila! Chiming in here... I not only get a failure at the UI notification but endup with a BSOD error stating DPC_WATCHDOG_VIOLATION (with the resultant forced restart) I've tried updating hard drive drivers, but I don't have iastor anywhere. I've attached my sysinfo file (memory.dmp is too big) 'preciate the feedback sysinfo.txt Having had those BSOD errors for a while (Windows 7), I found out that it was my video card (NVidia) causing them. But it wasn't the drivers or the hardware, rather the card had worked itself slightly loose in the PCIe slot! I unscrewed it, reseated it and it was fine...until it happened again. Did the same thing again and it's OK - I think there's a heating/cooling cycle that makes this happen in my case (pun unintended). That may not be what's happening in yours, but I'd look at the video card rather than anything else.
Bruno Posted May 5, 2019 Posted May 5, 2019 HI, I have the same problem on Cakewalk Bandlab: when I open a project, Cakewalk freezing on "Creating UI..." then crash. I have read your post but I am not able to solve problem. Any other idea? Thanks Bruno
Suboculis Posted May 7, 2019 Posted May 7, 2019 I was having the same problem. Turned out to be the Slate Virtual Mix Rack. I uninstalled and reinstalled only the Classic Instruments section of the VST and the problem went away.
Brian Sheen Posted October 7, 2020 Posted October 7, 2020 Has anyone received a definitive fix for this issue? I don't remember exactly when it started, but I'm thinking it was after a CbB update. I had been running a 3 monitor setup with no issues. I uninstalled the 3rd monitors video card to see if that's what the issue is, but it still hangs at Creating UI. Things I've tried: 1. Unchecking the notifications box- Didn't fix 2. Opening in safe mode and renaming the project- seems to fix those projects. 3. Tried to open a CbB template and it hangs. 4. Other projects still have the hang issue.
Isaque Soares Posted March 16, 2021 Posted March 16, 2021 What worked to me, run bandlab as administrator
zhangkekf Posted February 28, 2022 Posted February 28, 2022 Please see here: I've been troubled by this problem for a long time. The post tell that : When you open a project, cakewalk / sonar platinum will try to lookup some zip file outside the project and try to extract it. If you encounter a damaged zip file or a zip file that takes a long time to extract, you will always get stuck in the "creating UI". Because of conclusion in topic above, I remember that I created a huge zip file at "D:/mydata.zip" not long ago. Extracting it will take 20 minutes more. And I opened any project in cakewalk and hang at "creating UI" for 20 minutes or more time . I removed the D:/mydata.zip and all projects were loaded successfully and faster! But why was the Cakewalk even trying to unzip a zipfile that is not in the content directory or the project folder?
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now